Liczymy pasujące modele…
Print with a layer height of 0.2 mm and a width of 0.4 to 0.8 mm (you can do this with a 0.4 mm nozzle). It will print better with Vase Mode enabled. Use 6 bottom layers to enhance the durability of the socket. Let the bed cool BEFORE…
Use M4x10 self-tapping screws to mount the holder. Tear a hole for the screwdriver on the back side after printing. Print settings: Auto-orient the model in the slicer (lay the model on its top surface). No supports needed. 15-30% infill.…
I needed a model to start with for using an air pump and a standard PET bottle. I couldn't find any model that could hold air pressure, so I created my own. I print it with 3 perimeters
I bought the cheapest camera I could find locally…. And I tried all the adapters, but none fit the camera, so I made one myself. The camera has a long lens, so I had to set it deeper to avoid the printhead hitting it. Print without…
No supports are needed for printing. If your printer isn't well-calibrated, consider slightly scaling up the retainers. They are designed to fit tightly to prevent the ruler from skewing. For two-color printing with a single extruder,…
This scoop is designed with large holes to efficiently remove cat litter clumps while leaving the clean filler behind. I also make other sizes. Scale the model as needed before printing. I scaled it to a length of 20 cm. I printed it with…
3D Printed Parts: Lamp Body Lamp Base Pipe Fitting Bottom Cover Lamp Body: Make sure to scale the Lamp Body to 100x100: Lamp Body Model Additional Parts: Wemos D1 Mini (or other ESP8266 board) WS2812 LED Matrix 16x16 (Make sure it's 5V…
To wszystkie aktualnie dostępne wyniki.
