Liczymy pasujące modele…
VERSION 2: Box is now upgraded. On general demand the divider walls now have the same height as the the outer wall in order to avoid small parts move in between compartments. An assortment of different lure and tackle boxes. The box is…
Screwdriver holders which fit Wera size #0, #1, #2, #3 for honeycomb storage wall but will probably fit a lot of other models also. I used layer height 0.2 mm, 3 walls and infill 30% with regular PLA It is a tight fit into the socket, you…
A collection of simple thin hooks for the honeycomb storage wall system. They come in lengths of 20, 25, 30, 40, 50, 60, 70 and 80 mm. Check out the straight version of these hooks here:…
This is a simple model to test your bed level and adhesion. It's roughly 200x200 and fits the Ender 3 and Ender 3 Pro bed perfectly. It's ofcourse usable on any printer with a print bed of size 220x220 or larger. I use it to track down…
These jigs are for routing your own MFT table with benchdog holes of size 20mm. The first jig is used to establish a corner. The CC distance to the first holes from the corner is 70mm which is equal to the MFT/3. You will only need to use…
A housing for a 608 standard bearing. Very small footprint. I printed it in 0.20 PLA but would recommend PETG or ABS. Use a clamp or wise to carefully force the bearing into the housing.
A housing for two 608 standard bearings. Very small footprint. I printed it in 0.20 PLA but would recommend PETG or ABS. Use a clamp or wise to carefully force the bearings into the housing.
Simple nozzles which fits the glubot fastcap. Two sizes available now, thick and thin! PETG, 100% infill, you need supports
Includes the following labels: basil, beetroot, carrot, chili, chives, coriander, cucmber, garlic, jalapeno, lettuce, marjoram, oregano, parsley, pepper, rosemary, sage, thyme and tomato. Size: 190x14x4.2 mm If you print it with layer…
Loose Tenon Mortiser This is a simple loose tenon mortiser jig for a handheld Makita type of trim router with a diameter of 65mm. It is inspired by the Festool Domino and a number of more or less cheap ripoffs I’ve found on cheap chinese…
Router bit insets that fits the honeycomb wall by RostaP Print with the bottom down and use a brim I printed mine in 0.20 PLA PETG should work just fine
Remix of Giandos modell for a 0.5mm mechanical pencil. The diameter of the pencil is 9mm. U need Giandos original “Central Body” and “Screw” models Printed in PLA, 3 walls, 35% infill, no supports or brim
Attention: when doing first cut, plz reinforce the plate with som tape. PLA may splitter otherwise. BE CAREFUL Print it Install it with the original screws Reinforce it with tape Make a VERY CAREFUL first cut with safety glasses on Remove…
Printed in PLA, 0.3 layer height, 35% infill. No supports or brim is needed. The pot has draining holes in the bottom. You can easily scale the pot to any size you wish in your slicer software.
This is a very useful small scoop which can hold approx 2 tbl spoons of sugar, salt or whatever. It's small enough so you can print a bunch of them and have one scoop in every jar you have in your kitchen. You need to enable supports in…
This is a very simplistic and usefull Bokashi press which comes in two flavours, round and square depending on the form of your Bokashi bucket. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution:…
Another remix of Giandos modell, this time for an utility knife snap-of-blade. Use it to cut a clean line for mortising etc. Added a safety guard to prevent bloodshed when handling it :-) Remember that the gauge only cuts clean in the…
This is a simple old skool Moxon vise kit for metric M16 threaded rods and nuts. I printed the parts with the following Cura settings on my Ender 3: Layer height: 0.2 Shell: Wall line count: 4 (important!, these parts need to be sturdy)…
A small mini planting/seeding pot for peat briquettes. Place the briquette on the bottom of the pot, add water, wait for a couple of minutes then plant your seed. The hole in the bottom makes it easy to press out the plant when it is time…
Modelled in Fusion360. I've printed it with both PLA and TPU, both works just fine.
This is a spare part for the Miele G6620 dishwasher. The auto door opener which holds the door closed during operation and then releases the door for drying the dish broke and I couldn't get hold of a new one so I had to reverse engineer…
This is a dice tower completely modelled in Cura slicer 4.12. I challenged myself to create something only using simple building blocks within Cura. I used a Cura extension/plugin called "Calibrations shapes" and by adding simple…
This should work straight of the bat with the original model. I printed it using Prusa PLA matte galaxy black with 0.20 height and three parameters on a BambuLab P1P.
A simple port/outlet for your project. Fits a standard 50 mm dust hose. Works with the following connectors: Easy to print. 0.2 mm, three walls, PLA or PETG.
A simple threaded connector for your workshop. Fits a standard 50 mm dust hose. The threads holds the dust hose securely. Easy to print, you might need a brim when printing. 0.2 mm, three walls, PLA or PETG.
A simple T-connector for your workshop. Fits a standard 50 mm dust hose. Works with the following two connectors: Easy to print, you will need a brim and tree supports when printing. 0.2 mm, three walls, PLA or PETG.
To wszystkie aktualnie dostępne wyniki.
