Liczymy pasujące modele…
I designed this to expand on the “rings inside of rings” idea, and it gives this fidget a really interesting look and feel. It took six iterations to tune the tolerances, but the final version works great! Just give the model a few spins…
A fun fidget to take with you on the go! Print in .2mm resolution, and you may need to slow down your first layer for the best adhesion. If you like this model, consider checking out my latest fidget design here:…
I've made a couple of designs based on this idea before, but I realized that more segments = more fun, so now there's 35 😂 This design twists, expands, and collapses in a really neat way, and the segments can actually be separated and…
This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with…
Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…
I've been inspired by a few of these kind of designs recently, and I wanted to try it out myself. I designed a standard version first before abandoning all sanity and making one with 20 segments 😂 The small version is really fun to play…
Definitely my favorite addition to the Stackable Shelf Organizer so far! This is a drawer organizer in various sizes that is fully compatible with the parent design and simply drops into one of the shelves. You can use the organizer with…
Introducing the Hexagon Superfidget V2: Upgraded to 45 segments with improved expanding and twisting action, and 3 sizes available! Print Tips: Especially for the full size fidget, watch your first layer carefully. I recommend slowing the…
This fidget began as a mini version of my RotaRings design. While the initial prototype didn’t turn out well, I decided to repurpose the small rings into a mesmerizing chain fidget! Each link snaps together with a smooth ball joint, and…
I recently bought a new printer, and I wanted to test my CAD skills as well as the printer's abilities. This design definitely did both! It's a difficult model to print, but it looks awesome when it's finished. Recommended Print Settings:…
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
I went for a visually interesting wavy style to this fidget, which made it much more difficult to design than my other hexagon fidgets. These segments gradually morph from eight rounded waves on the outside to octagons at the center,…
Prints well with .2mm resolution and 20% infill. Be sure to turn on “Print thin walls” to bring out the lettering detail, and don't be afraid to slow down the first layer. This is my first attempt at a kit card design, so there is…
Overview If you've printed a Lucky 13, you know how hard it is to keep track of all the accessories. Mr beeps' model was a great way to solve this problem, but I wanted a smoother, more secure design. This organizer includes spots to snap…
This model prints without support and can be scaled to your needs. It also makes for a decent bridging and retraction test 😉 Print Settings: Model scale: 75% Resolution: .2mm Infill: 20% Perimeters: 2 Filament: Amolen dual color PLA…
For my latest updated and improved design of this case, check this link: https://www.printables.com/model/321850-iphone-8se-case-support-free-voronoi-designs-hard- After several iterations, this final version offers all-around protection…
Aquatic Dwayne with a moving second jaw
My team had trouble printing the provided STEP file from Andymark because of some strange model errors that make for a messy print. The file has been modified to solve those issues, and requires no supports to print! I recommend using a…
I primarily use this file as a coloring guide for Lucky 13s. You can paint different skin or armature parts in CAD as a preview before you print it out! I'm sure the STEP file is useful in other ways as well. I've included the Fusion 360…
Print with the same settings as the launcher, drop it in with some glue, and you're good to go!
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
What is the MBOT3D extruder? This extruder shroud is a super compact, sweet looking upgrade for your printer, featuring dual 4010 blower fans for maximum part cooling. This remix makes the MBOT3D extruder shroud compatible with all the…
These are a quick, easy mod for your Mini 13! They print with the same settings as well (.15mm resolution). Thanks to Doodle_Monkey for the remix model!
The Infinity Cube is a fun, great looking desktop model that prints without supports! Print it in your choice of filament and whatever scale you want, and enjoy its fascinating geometry! Print Settings Printer Brand: Creality Printer:…
A simple threaded container perfect for holding small items and throwing in a backpack, or displaying as a desk container with the included stand! Spheres are challenging to print, so I spent many iterations tuning the design. I ended up…
Printing Download the pre plated parts for an easy all in one print, or use the individual files to add some color contrast. Resolution: .2mm Infill: 15% Walls/Perimeters: 2 Supports: nope Assembly Mesh the gears together and snap in the…
To add to my Rock collection I made this super fast printing Dwayne Johnson vase! Be sure to print with “Spiralize outer contour” on to disable retractions.
Print Dwayne at any scale you need (mine was 75%) and enjoy his plant-growing abilities. Print Settings: Resolution: .15mm Infill: 15% Supports: No Rafts: No Material: PLA Printed on: Creality CR-10 Note: I was unaware of this, but…
I printed mine at .2mm layer height and swapped filaments at the top for accented numbers. They turned out really clean, a huge improvement over the smaller numbers. Big thanks to victornpb for the original idea!
This model is designed for printing with a .4mm nozzle and .2mm layer height. It's a great way to diagnose and calibrate things like nozzle offset and fine details as well as overhangs and retractions. I printed my test on a direct drive…
It's been a while since I designed my original infinity cube, so I decided to make a new one that looks even cooler :) Scale to preference and print in any resolution. Keep the original orientation, and the cube will print support free!…
I designed this using the torus and circular pattern features in Fusion 360. It needed some tuning to get right but turned out great! Works well at any scale you need and whatever layer height you prefer. Mine was 150% scale at .2mm…
Howdy! I've always enjoyed mechanical print in place models. Howdy is my attempt at a fun to make, (almost) support free mechanical design that doesn't look like it should print in place. This model utilizes the overhang and bridging…
Designed to be printed in .2mm resolution. Also hexagons are the bestagons.
This torture test is designed to test cooling, overhangs, bridging, retraction, build plate adhesion, and precision. Print with a .4mm nozzle and .2mm layer height. Print speed, retractions, fan speed, temp, that's all up to you. Mine…
Scale to your needs and print in .2mm resolution with vase mode on.
Yet another fabulous rendition of The Rock for you to enjoy
Another magnificent rendition of The Rock for you to enjoy
Ghosting, loose axes, poor layer adhesion, and cooling problems can all be easily identified and remedied using a quick Rockey print! By changing the resolution, scale, and speed of this print, you can fine tune your printer to reduce the…
A quick solution if your print happens to be stuck; just pop it in like a key and twist to free the gears. I recommend printing with at least 4 walls/perimeters and 30% infill.
Print Settings: (scaled to 150%) Resolution: .12mm Infill: 20% Walls: 3 Material: PLA Supports: No Printed on: Creality CR-10
Studies have shown that owning a Rinker increases brain function and overall productivity by up to 5000%* *participants may or may not have ingested lethal amounts of RedBull beforehand
A simple, modern looking ribbed vase. Printed in .2mm resolution, and can be scaled to your liking.
Print Settings: .16mm layer height 2 walls 30% cubic infill No brims or supports Reduced first layer speed Filament swap at layer 7 for multicolor printing Fuzzy skin on for a neat texture *3mf print profile is also included if you own a…
Be sure to print in PETG or another food safe filament, and wash by hand, not in a dishwasher. Recommended Print Settings: Resolution: .28mm Infill: 0% (doesn't matter) Walls: 1 Adhesion: 15mm brim Supports: No Filament: PETG
This turntable is designed for a Futaba FP-S148 Servo modified for 360 degree rotation. You will also need four 13.5mm ball bearings and M3 hardware for mounting. There are numerous mounting holes on both the bottom and top of the…
To finish this model, cut three lengths of fishing line and string them through the four sets of holes, as shown in the picture below. Print Settings: Rafts: No Supports: No Resolution: .2mm Infill: 25% Filament material: PLA, ABS, PETG…
A simple deadbolt lock I designed to replace a worn out latch on a sliding door. The model prints in place using the provided orientation with .2mm layer height and 4 walls. Tree supports work best. I also recommend using a brim for…
The Idea I've always enjoyed printing vases, and there are a lot of really neat designs out there. I wanted to make a vase that is completely different from anything out there, but remains functional and cool-looking. The design prints…
This is a model I designed using Fusion 360's automated modeling feature. Believe it or not, the design prints support free! I printed mine at 70% scale and use it as a display for random prints, but it can be used for all kinds of…
Alas, the humble tower of cards. So magnificent, yet so daunting… Mesmerizing, yet frighteningly delicate. What if there was a solution that required little skill, not glue or tape, and just a couple grams of plastic? Well, voila! With…
It's The Rock with Santa's hat. What more can I say?
Print Settings: Resolution: .12mm Infill: 20% Walls: 3 Supports: No Printed at 100% scale in PLA. Note: The blending on the model isn't perfect, so your slicer probably wont be too happy about that, but it totally still prints! If there's…
Don't ask, just print
Recently I discovered this technique in Cura and while I'm definitely not the first to use it, I wanted to share it with the Printables Community! You may have noticed while working in Cura that while importing STL or other 3D printing…
Print this monstrosity in .2mm resolution and 20-30% infill (a little more weight helps keep it stable). Then fit up to 50 flossing devices into the slots! No supports are needed.
I designed this container to organize random small items, and it makes for an simple, easy print. You may need to sand the handle down until it fits into the lid tightly, but besides that the print will snap together well and keep the lid…
This design pairs well with my accessories organizer ( https://www.printables.com/model/214432-accessory-organizer-for-monoprice-delta-mini ) if you want to keep all the easy-to-lose tools accounted for. No supports required, just…
A simple spool holder for the Longer Cube 2 printer. Print with supports in the original orientation. Recommended Print Settings: Resolution: .2-.28mm Infill: 20% Walls: 3 Adhesion: No Supports: Yes Filament: PLA, PETG, ABS
To wszystkie aktualnie dostępne wyniki.
