Liczymy pasujące modele…
This is a gameboy macro face plate for a ds lite. It comes in 3 flavors one with the touch layer,one without and one with the obirux screen lens The touch layer face plate comes with 2 thin covers to go over the dpad and buttons. Best to…
This is the face plate for the gameboy macro ds lite screen switch mod. 2 Options for download, One with 1 button and the other with 3 buttons. Print with support and 75% infill to give the screw posts some help. More info about the mod…
New and improved Gameboy macro XL face plate. Ive added L and R button pivot points and spring holders. Print it face down without support with 75% infill to add strength to the screw posts. Use the original screws from a DS and use the…
3d Print you own paracord lanyard, Just add a M3 6mm bolt and a mini carabina Blog post - https://wp.me/pKY3w-D5
This is a Gameboy Macro XL face plate, It allows you to turn a broken nintendo DS phat into a gameboy advance. You can keep the touch screen layer or remove it to improve the screen clarity. It has room for a front facing speaker that is…
I built a Cyberdeck around a raspberry pi project I had made called the Zero Boot System (ZBS) More can be found at the blog posts below ZBS blog post - https://facelesstech.wordpress.com/2019/06/29/zero-boot-system-thin-and-lite/…
New and improved Gameboy macro XL 2 button face plate. Ive added L and R button pivot points and spring holders. Print it face down without support with 75% infill to add strength to the screw posts. Use the original screws from a DS and…
Micro sd card holder that as space for Dymo labels next to each card. Makes it easier when you want to organize your micro sd card collection.
Found out my refurbished thinkpad x220 only came with one hard drive caddy arm. I wanted to also take advantage of the fact that you can easily swap the hard drives on the thinkpad x220 too.
I had the idea to make a Gameboy cart that looked like a NES cart. The front need to be printed without any support but the back can be printed with a brim and support. The label you will need to scale it to be 30mm wide and the rest will…
This is a Gameboy Macro XL face plate, It allows you to turn a broken nintendo DS phat into a gameboy advance. This version is for use with obirux glass screen cover. Just remove the touch layer place this faceplate in place and drop the…
A replacement shell for your gameboy games. Print without support or brim on the front piece but you can use support and brim on the base.
I had the idea to make a Gameboy cart that looked like a NES cart. The front need to be printed without any support but the back can be printed with a brim and support. The label you will need to scale it to be 30mm wide and the rest will…
This is a cyberdeck built around a raspberry pi 400 a 7" screen and a power bank, More can be found at the blog post below Blog post - https://facelesstech.wordpress.com/2021/11/20/cyber-deck-2020-extruder-edition/
This is a Gameboy Macro XL face plate, It allows you to turn a broken nintendo DS phat into a gameboy advance. This version is for use with obirux glass screen cover. Just remove the touch layer place this faceplate in place and drop the…
I wanted away to use 14500 lipo battery's (AA sized) with my SJ4000 clone action cam. I also added a gopro style mount to the bottom. Requires AA spring and dome plates plus some wire and female headers. More info at the blog post below.…
This is a mod of the DS lite that lets you have a flush GBA port. You will need to remove the DS slot, GBA slot battery post and crystal. A custom flex PCB is also required. More info can be found at the blog post below. The faceplate I…
I made a clicky button flex PCB that lets you have ds phat/gba sp style buttons. Ive made a hard membrane to replace the original membrane. More info about the clicky button pcb can be found here -…
This is a replacement shell for GBA carts designed around the NES gameboy cart, It fits a offical GBA cart and a repro one too. Slots together and is secured with the screw. For the lable just size scale it to be 30mm wide and then just…
This is a replacement cart for the GBA that's in the shape of a USA SNES cart. It should take genuine carts and repros, Reuses the tri-wing screw from the cart. For the label you need to resize it with locked scaling on, If you set the…
I designed an open source gameboy cart shell that lets you put full sized stickers made from gameboy box art onto the carts shell. This version is to be used with original carts, most are the same and looks something like in the photos.…
I designed an open source gameboy cart shell that lets you put full sized stickers made from gameboy box art onto the carts shell. This version is to be used with repro carts from aliexpress, Most are the same and looks something like in…
Wanted a portable small arcade controller so I made one. Using some industrial buttons and a joystick wired up to a arduino Blog post for more info - https://wp.me/pKY3w-Ap
Wanted away to put my nano sim into a Nokia 3310 so remixed this.
Designed a replacement PCB to go into a Gameboy Color shell, Its a raspberry pi zero W and can only really play Gameboy games and NES games duo to the controls. More info at my blog post below and youtube. Blog post -…
designed a pair of sunglass with a led strip around the top (ws2812) with 4 different patterens. Powered with a AAAA battery and a attiny85 More info at my blog post below Blog post -…
This is a replacement cart for the GBA that's in the shape of a USA SNES cart. It should take genuine carts and repros, Reuses the tri-wing screw from the cart. For the label you need to resize it with locked scaling on, If you set the…
I made a disposable tool to make it easier to thread wire through a paracord 550. Just remove all the paracords internal cords then glue one into the end of the tool. Then glue the other end to the wire you want to pass through the…
I designed a case for the pwnagotchi that uses a 2.13" e ink screen a raspberry pi zero w 2 a powerbank board and battery that all fits in a iPhone 13 case. Full info can be found at my blog post below Blog post -…
All 3d printed apart from some string (I used paracord) and a loom band (yeah rememeber them). Print off all the parts plus 4 split pins. The string just wraps around the end of the trigger then around the gripper end. The hands are from…
This is a cyberdeck built round a 5" screen a raspberry pi zero w2 USB hub and a 4000mAh battery. More info can be found at the blog post below. Blog post - https://facelesstech.wordpress.com/2022/04/17/cyberdeck-slide-connector-edition/
A stand for the original arduboy Print without support and 20% infill. The font is Collonse - ali sifak muftari - https://www.1001freefonts.com/designer-ali-sifak-muftari-fontlisting.php
A tool to hold a small amount of solder when soldering
Wanted to make a fidget keyring designed around the GBC buttons, Can just be built with the buttons and membrane or you can add the PCB so they light up when the button is pressed. Uses the GBC tri-wing screws so you can just raid your…
I had the idea to use LED filament strips to light up a ID badge holder. Uses 130mm led filament strips and a CR2032 battery. More info can be found at the blog below. Blog post -…
3d Print you own paracord lanyard, Just add a M3 6mm bolt and a mini carabina to hang a raspberry pi off of Blog post - https://facelesstech.wordpress.com/2020/07/16/raspberry-pi-power-lanyard/
If you want to put a front facing psp 1000 speaker into a stock ds lite front shell, I also included a drilling jig so you can get it perfectly lined up and so it will all fit together. The drill jig is just for a pilot hole then it…
https://facelesstech.wordpress.com/2023/08/19/diy-geiger-counter/I designed a case for the Geiger counter that's available on aliexpress. It adds a arduino and a boost/charge board. I found a firmware for the arduino that takes the output…
I designed a back shell for the badger2040 e ink badge that lets you house a lipo and lipo charger with switch. Also I added a breakout part to the breakout pins on the right hand side…
This is a complete replacement shell of the 5th gen iPod. The "ipod_5th_gen_switch_jack9ipod_5th_gen_switch_jack9" part needs to be printed with bed support but all the others can be printed without. Ive added a few new mods since I now…
I ordered a RGB PC fan from aliexpess and found this blog post on controlling it with an arduino https://blog.ja-ke.tech/2019/06/11/re-coolmoon-rgb-controller.html i used a cheap power bank board and a 18650 to power it, Also I used a…
I designed a 3d printed shell that makes the Gameboy rumble cart as small as possible and also keeps the rumble functionally. The PCB taps into the the VCC and GND and PIN 26 of the MCB5 mapper chip of the cart and powers the vibrate…
This is my take on a arduboy but with a SSD1309 screen and flash chip to store games. Its in a GBA sp shell and can be charged via USB C. More info can be found at the blog post below Blog post - https://facelesstech.wordpress.com/?p=2767…
HDR's flashcart for the gameboy camera has a switch to switch between 2 different roms, This extends the switch to a gap you cut in the original shell. To cut the shell lay the switch extender onto the switch in the up position mark on…
3d printed replacement buttons of ether the mario or zelda game and watch consoles. Will need to replace the membrane with DS Lite A B X Y one cut in half, As shown in the photos. The buttons come in 2 sizes to suit your tastes.
DMG usb controller built with a raspberry pi pico Blog post - https://facelesstech.wordpress.com/2021/09/11/gameboy-dmg-usb-controller/ Youtube - https://youtu.be/SSk9fk12odg
The cover needs support but nothing else does, The cover is attached using filament. The lithoplane needs to be printed 100% infill. Blog post - https://wp.me/pKY3w-AW
Designed a bauble that uses a strip of WS2812 LED's powered by a attiny85. More info at my blog post below Blog post - https://wp.me/pKY3w-EH
If you have the HDR MCB5 flashcart that has the bank switching this is the shell for you. This gameboy cart shell that lets you put full sized stickers made from gameboy box art onto the carts shell. To make a sticker all you need to do…
A riser to fit a flash chip under the back cover of a arduboy. More details can be found at the blog post below. Blog post - https://facelesstech.wordpress.com/2021/12/27/arduboy-dead-bug-fx/
This is a project I made that replaces the vibrate motor in a pokemon pinball game with an LED Blog post - https://facelesstech.wordpress.com/2019/11/10/pokemon-pinball-without-the-rumble/ Youtube video - https://youtu.be/pGaK61LOfqc
Wanted to design a case for my ZBS which is a raspberry pi that has a 3.5" 480 x 320 screen, Battery and full sized USB port ZBS blog - https://facelesstech.wordpress.com/2019/06/29/zero-boot-system-thin-and-lite/ ZBS case blog -…
So I wanted away to wish on shouting stars on animal crossing new horizons automatically. Read my blog post below for full details Blog post - https://wp.me/pKY3w-Ev
I found that my motorhome hab door retainer slider had broken and couldn't find a replacement. Hope this helps someone out. I've included the step and freecad files.
To wszystkie aktualnie dostępne wyniki.
