Liczymy pasujące modele…
Do you want to use straight worker talon style mags in your Fury X? Look no further, this small replacement will solve that issue! Just remove the old mag release part, and swap the spring to the new one. This is much more secure, and…
I wanted a longer rail at the front of my X shot Fury X, but not a larger form factor. This does both, extends the rail to fit a foregrip. The scar adapter works with the worker scar or the dart zone scar, and maybe others but those are…
Keychains I made for Invincible and all his variants in the Invincible war. Most of these can be made without an mmu, but if you want 3 or more colors then you will have to use an mmu or paint i guess.
This is a large model, 163cm tall, just like the real one. Good luck printing it full size honestly, I settled for 20% scale. The stand included is for a 20% scale as well. No i didn't leak military documents or something for this, all…
Works like a charm. Original model was great, but I like the full size one more. Print the tang on its side, and the arms standing up, you will need to mirror the arm, if you print 2 of the same arm it will look weird.
A belt loop holster for your Cricket Pro. Very Snug so it wont fall off while running, but can be removed very easily during a game. PETG is what I used, PLA will probably be fine. Print with supports, flat side of the belt loop down.…
I hate the tape, and the lid holder for thr staw, so i made this clip. This is very low profile, so it won't take up to much additional space, and won't bend you straw up. I printed at 10% infill, 2 walls out of PLA. Print with the flat…
easy install, just replace the orange switch on top of the baster with the bottom peice, then reassemble and attach the top rail.
I just took the magik symbol from the game and made it into a keychain.
3X clip for standard silly shells, to pack more shells per inch of belt space.
A short stock replacement for the X Shot Ejector Shell. Ill post a picture of my own as soon as i print it Great model @Gemeneye and thanks for including the F3D file for easy remixes.
A tower I made for myself (and my dm) cause i liked this idea I had. The bottom of the tower is who's turn it is, so load the tower in the correct order, just pull the players flag out when their finished their turn, and place it back on…
My model of the camera from Content warning, the game made by Landfall. Modeled from scratch and reference pics, so probably not 100% accurate
Malgosha's tiny knife she trys to kill steve with. I made it to have some kind of cord wrapped abound the handle, but you dont need that necessarily
Store an extra silly shell under your rival fate with this simple 2 part kit. You will need to sperate the 2 parts in slicer via the separate into objects function. Requires 3 nerf screws (screws taken from another blaster)
The tip jar from drg's abyss bar in the space rig Always tip Lloyd! Rock and stone!
A box I made to store up to 9 sillyshells , these wont take any of the larger variations. I may make a larger version to fit 15, if this design does well. Everything is in print orientation, and a piece of filament is used as a hinge. No…
The shock stick from content warning by landfall. It is designed to use a ¾" wooden dowel, but if you really want to print it go for it. The stick in the files is 3ft long, which looks about right, but make it as long as you want. Please…
Now you can take your tracker on the go! Just write your players names on the flags, i used tape so its not permanent. Then place the flags onto the tower in order, so the first up is on the bottom. Wait for the monk to make 12 attacks……
Here's a collection of silly silly shells I came up with, with more probably coming in the future. U turn shell: The dart can ONLY be loaded in the "Front" (non blaster) end of the shell, putting a dart in the backside will probably just…
I keep hitting the back mag relapse by accident, so I made a smaller version to make it harder to hit my accident, while still being able to use as intended. If this isn't enough I also made a delete version.
Will probably break if you push it off a cliff. Also it is designed to fit a little bit of pipe cleaner glued into the plant pot, but I don't have any so I never tested it.
keychain for the Fiero SE, its oversized, but i scaled mine to 30% x and y, and 120% z. Designed for singer extruder.
Cupholders for my dad's '86 Fiero, but I think it should fit for other models. You will need to hit separate into objects to separate this into 2 parts. Its the “O” button at the top of Prusa Slicer Needs 2 m3x8 bolts and 2 nuts To…
A nice clip I designed to slide onto my belt. Clips to a standard silly shell very satisfyingly, and is easy to attach and remove a shell.
Just kinda mushed the 2 models together
2 for one belt holster for standard silly shells
Custom for a friend of mine, should work as a muzzle cap replacement to give your blaster a more tactical look. Now plus a rifled version Please dont print in black
Untested muzzle for the nerf zombie driller.
A standard silly shell clip now for your pocket, waistband, rig or anywhere else you can stick this thing.
The classic winnebago stripes copied from a 1986-1987 winnebago chieftain 33, aka Eagle 5 from Spaceballs. Designed for single extruder
A small box like place your your wyze camera, I used fake plants from Michaels on top. A wider version to allow room to angle the camera down inside the box.
A one wide archway for Dungeons Works for the Dungeon Fab System (you should check it out) Print with the top on the bed
the rounded version is better for spinning your blaster
2 space wide archway for Dungeon fab systems. I would have textured it if i knew how. Print with the top down on the bed. Dungeon Fab system (Check it out its tons of fun to print)
This is a super easy kit to turn your Nerf Glowshot into a SE44C from starwars Battlefront 2 (Its one of the officer class blasters) Step by step guide to mod this blaster 1: Print out all parts 2: remove all screws, and disassemble the…
A quest board for Dungeon Fab systems My paint job is terrible but you can probably do better
Uses a nerf screw, just pull it off some old blaster it will survive.
You can print as one part, or hit separate into objects to print it as 10 separate parts. This will hold togther with friction, but I decided to glue it so it cants fall apart Those parts are as follows: 1x reliant robin 1x main booster…
A big slide, based off the Lanka slide. I havnt tested this yet but i will soon and update with results Remixed from Leedle's Satakiel slide
Just sits in either ashtray in a fiero. Made for a '86 but should work in other years. Printed flat side down Designed for an S22 in a phone case, if it dosnt fit your phone lmk and ill make a new version for you.
Made this for my hand x bow wielding dnd character. Uses a small amount of flexible string, mine is 3mm i think. Simply replaces the standard corsair muzzle.
MAKE YAH SHOOT BETTAH (Needs some sanding)
Big ah muzzle for the inline clip variant of Domochevsky's x shot micro 2.0 reshell. 100% cosmetic, it doesn't make the blaster quieter or more accurate, only longer (which was the goal) Total length of the blaster: ~ 19" THIS IS ONLY THE…
Dual blades from the hit game the Finals. Made these incase I ever buy a Neptune 4 max, definitely cant be printed in one piece on my mk4s. I haven't printed it yet so still a WIP, im planning on adding a version pre split to fit on…
No supports needed, 15% infill works fine.
A set of replacement barrels for the Adventure force springfire. A few have been tested and confirmed to work. No shell cutting required, but you will need top remove the air restrictor.
I bigger prime for the hush 2, hopefully more ergonomic than the original, which is too small for me. IT DONT WORK working on a update
Its a holster i designed for the boxy buster IYKYK
A front mag/grip for the HUSH 2. It fits great on my hush, and holds a mag very well. I would suggest printing it upside down to avoid a ton of supports in the magwell. Also Updated the muzzle, now its slightly longer as the original…
Super easy mod for your X shot Manic. To assemble: Take apart the blaster Take off the screw, and bend the clips to remove the existing side panel Insert the printed side panel and secure it in place with the leftover screw Put the…
I wanted to make something from JC3 that I could find already here so I made this. Its 2 parts just hit separate into objects to separate them. I imbedded magnets into it, to imbed magnets into a part just create a negative part cylinder,…
A spearhead for your giant nextruder , first hit sperate into objects to separate the pin and the spearhead then cut the spearhead in half using the cut function. Finally cut down your foes with the power of Joe Prusa himself
A token for Crash Derby that uses a model of a 1985 Pontiac Fiero I made
The Goo Gun from The Finals I love this specialization, I just had to make it into a prop Everything is pre-split up for printing, no connectors or anything is needed, but glue is still required. Additionally you will need a pen spring…
A BBR pad from The FP Conveniently coaster sized
SubZero is a charity nerf match that happens in the spring in NY, if you went and didnt get one, or you want another here you go.
Dome shield cause someone asked for it, had issues with the step files for some reason so included the stl as well, just hit spit into objects to separate it. The loop is meant to attach with small plastic screws, im going to use some i…
Most foam cutting tools are dangerous, like knifes and hot wires. This rasp allows you to easily shape foam, without the risk of injury. I designed this for my father, who is a elementary school teacher,
The translocator from the Finals. My favorite of the new gadgets added in the last update. Working handle with its own compliant mechanism spring. Every part is separate for optimal printing. Supports are required. To split up the file,…
To wszystkie aktualnie dostępne wyniki.
