Liczymy pasujące modele…
Stackable Tray for DIMM and SODIMM Memory, inspired by https://www.printables.com/model/161967-ram-sodimm-dimm-tray Update: added an (untested) DDR4 version as DDR4 SODIMM is about 2mm longer than DDR3. DIMMs fit in both.
Stackable Tray for m.2 SSDs. Remix of my DIMM/SODIMM Tray
id=34mm od=37mm studs=2,5mm
Slim mount with optional GoPro Attachment for OV2710 (or similar) camera modules. The Lens hole is 15mm, Screw holes are M2, PCB Size 38mmx38mm, mounting hole pattern 28mm. Requires 4 M2x10 Countersunk screws (or superglue, I don't judge)…
Depending on the thickness of the fillport there might be clearance issues with the dust filter.
Requires four Universal Hooks from https://www.thingiverse.com/thing:2853257 The model is for the right side, mirror it in your slicer for the left side. Unscrew the original side plates and replace them with the 3d printed ones using the…
I removed the bottom tab as it was too thick for some cases I used the screws that came with the card, I don't know what size they are. The holes are 2,5mm Also check out my Fan Bracket…
I used these screen protectors https://www.amazon.de/dp/B0BD5D5JHQ (not affiliated, just for reference) The hole for the glass is 65,7mm x 146,1mm
Designed for a Noctua NF-A4x10 FLX, but should fit with any 40x40x10mm fan Also check out my PCIe Bracket https://www.printables.com/model/1403187-qlogic-qle8142-ibmx-pcie-bracket
Hardware Required: 2x M3 Screws (I used 12mm length, but 8mm should be enough when you use Heatset inserts) 2x M3 Heatset insert or nut 2x M3 Washer (optional)
You will need two countersunk M4 screws 4mm longer than the original ones The bottom face of the mount is offset by 4mm and the extrusion will be offset by 6,45mm
To wszystkie aktualnie dostępne wyniki.
