P
Printablesjmacz
Macintosh SE and SE/30 Rear Port Cover
This replaces the rear port cover for Apple Macintosh SE and SE/30 computers.
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
Wszystkie modele
Liczymy pasujące modele…
P
Printablesjmacz
Macintosh Quadra/IIci/IIcx Nubus Slot Cover
This is a Nubus slot cover for Apple Macintosh Quadras including the 700 and the 800.
- Pobrania
- 46
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
Motorola 68040 CPU Fan Holder
This is a fan holder for the Motorola 68040 CPU for use in Apple Macintosh computers. This bracket is designed to hold both a Noctua NF-A4x10 fan which is a 40mm x 40mm x 10mm fan and a 40mm x 40mm x 11mm heat sink sandwiched together.…
- Pobrania
- 46
- Polubienia
- 9
- Ocena
- 4,5
P
Printablesjmacz
Wombat ADB Adapter Case
This is a case for the Wombat ADB adapter sold by BMOW.
- Pobrania
- 44
- Polubienia
- 6
- Ocena
- 5
P
Printablesjmacz
Macintosh SE SCSI Drive Bracket
This is a SCSI drive bracket for the Macintosh SE or SE/30. This is very similar to the original design except the bracket is shorter so that it won't get in the way as you plug/unplug cables from the motherboard. It should fit spinning…
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 5
P
Printablesjmacz
PowerBook 500 Battery Cover
This is the battery slot cover for Apple PowerBook 500 series including 520/520c/540/540c. You will need to supply a small spring. Includes frame for when the cover is used without a battery (to just cover the slot).
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
Printablesjmacz
PowerBook 5300 Rear Port Cover
This is a replacement rear port cover for an Apple PowerBook 5300 series laptop.
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
Printablesjmacz
PowerBook 5300 Display Hinge Mounts
These are various replacement plastic mounts, etc for the pieces that normally break off on an Apple PowerBook 5300 series laptop.
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
Printablesjmacz
Macintosh SE Minimal SCSI Drive Bracket
This is a minimal SCSI drive bracket for a Macintosh SE or SE/30. It mounts onto the top of the floppy drive casing using the same screws as the stock bracket. This bracket is shorter than the stock bracket so that it's easier to…
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
Printablesjmacz
PowerBook 160 Chassis Standoffs
This replaces broken plastic standoffs in the chassis of the Apple PowerBook 160. Will probably fit other same generation PowerBooks but only tested with the 160. Transfer the brass inserts from the stock standoffs. You can superglue or…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
Printablesjmacz
PowerBook 500 Display Hinges
These are display hinge mounts for the Apple PowerBook 500 series including 520/520c/540/540c. There are other models that have been posted but these models are meant to use a M2.5 brass bushing insert (you can find these on Amazon). The…
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
Meow Toast Holder
The 3D printer holder for the Meow Toast is not very supportive. This is a replacement model that better holds the Meow Toast in place. The Meow Toast is a CR2032 battery replacement for vintage Apple Macintoshes.
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
Printablesjmacz
Macintosh SE/30 SIMM Brace
This bracket helps support the SIMM modules in an Apple Macintosh SE/30. The normal plastic SIMM sockets break overtime. This brace helps hold the memory modules in place for those with broken SIMM sockets.
- Pobrania
- 27
- Polubienia
- 7
- Ocena
- 0
P
Printablesjmacz
Macintosh SE and SE/30 Rear Port Bracket
This model is for the bracket that fits onto the steel frame of a Macintosh SE and SE/30 that uses the detachable rear port bracket.
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Battery Cover
This is the cover for the battery slot on a PowerBook Duo. This model is made for the type of Duo battery where the cover slides onto the battery itself.
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
PowerBook 500 Front Bezel
This is a replacement front bezel for the Apple PowerBook 500 series (520/520c/540/540c). It gets under the display where the microphone is.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
Macintosh II Nubus Slot Cover
This is a replacement nubus slot cover for an Apple Macintosh II (IIx/IIfx).
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
PowerBook 500 Charger Plug
The required metal shield can be obtained searching for an RCA shield, or you can make your own via a 10mm stainless steel tube with 0.5mm thickness. You will also require some crimp pins and a 5 wire cable with diameter of 5mm.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
Printablesjmacz
Macintosh IIci Power Supply Clip
This is the clip that fits onto the bottom of an Apple Macintosh IIci power supply. It also fits the Quadra 700 power supply.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Side Bumper
This is a replacement side bumper for the Apple PowerBook Duo. The stock one deteriorates over time so this is a replacement.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
Fujitsu Magneto Optical Drive Ejection Catch
Replacement for broken ejection catches on Fujitsu magneto optical drives.
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
Quadra 950 Nubus Slot Cover
This is the rear nubus slot cover for the Apple Macintosh Quadra 950. It will probably work on the Quadra 900 as well but I have only test fitted it on a Quadra 950.
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
PowerBook 160 Leg Bumper
This is a replacement for the little bumper foot that goes on the bottom of the legs of an Apple PowerBook 160 (and similar models).
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
Macintosh Quadra 800 Drive Slot Cover
This is a replacement cover for the Quadra 800 drive bays. Should fit Quadra 840AV as well.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Power Supply Case
If the casing for your PowerBook Duo power adapter cracked/broke, or you intentionally broke it in order to open it up to recap the power adapter, then this model is for a replacement case for the power adapter. The exterior is not…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Battery Contact Alignment Tool
The service manual for the Apple PowerBook Duo shows a battery contact alignment tool for aligning the battery contacts when disassembling the PowerBook Duo. This is an attempt to recreate that tool based on the pictures in the service…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Display Hinge Mount
This is a replacement hinge mount for the Apple PowerBook Duo. You can super glue or epoxy it in place and use the stock brass inserts with it.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
Macintosh Quadra 800 Drive Slot Cover Clips
These are replacement clips to fix the drive slot covers on an Apple Macintosh Quadra 800 and 840AV. If you broke yours, you can cut away parts of it and install these parts via super glue or epoxy.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
PowerBook 3400c ADB Port Cover
This is a replacement ADB port cover for the PowerBook 3400c. The port is found on the left side of the laptop. I have found this port cover to be missing on a lot of PowerBooks so made this part based on pictures I have seen. Because I…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 5
P
Printablesjmacz
Quadra 950 Restart and Interrupt Buttons
These are replacement reset and interrupt buttons for the Apple Macintosh Quadra 950.
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Center Clutch Cover
This is a replacement center clutch cover for the PowerBook Duo series. The center clutch cover breaks easily as it was originally intended to be a disposable part. This model recreates it.
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
Apple Multiple Scan 17" Front Bezel
This is a replacement front bezel for the Apple Multiple Scan 17" Trinitron Monitor.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
Kensington Turbo Mouse 3 Bearing Holders
These are replacement bearing and LED holders for the Kensington Turbo Mouse 3.0.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo Charger Cord Clip
This replaces the little cord clip found on Apple PowerBook Duo chargers.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesjmacz
PowerBook Duo ZuluSCSI Mount
This is a mounting bracket for ZuluSCSI compacts (laptop version) and the Apple PowerBook Duo.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
PowerBook 500 Hard Drive Bracket
This is the hard drive bracket for the PowerBook 500. Since plastic doesn't obviously have the rigidity of sheet metal, the design is slightly different to provide more rigidity.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesjmacz
Macintosh II Floppy Drive Cover
This is the floppy drive slot cover for the Macintosh II, IIx, and IIfx. A light pipe is also provided that will take standard 5mm leds.
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.