Liczymy pasujące modele…
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: No Adhesion: Skirt or brim if…
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
3D printable PLA fidget clicker with bottom holder. Low-profile and durable for satisfying clicks. Recommended print settings: Layer height: 0.2 mm Walls / Perimeters: 4 Infill: 20% gyroid Top / Bottom layers: 5+ Nozzle temperature:…
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Basic PLA Settings Layer height: 0.2 mm Nozzle temp: 210 °C Bed temp: 60 °C Print speed: 60–80 mm/s First layer speed: 25 mm/s Retraction distance: 1–2 mm Retraction speed: 35 mm/s Fan: 100% after first 2–3 layers Infill: 15–20% Wall…
Print in PLA Any Infill VERY IMPORTANT !!!!!!!!!!!! WHEN USING Colour and Infill Swatches.3MF AND YOU OPEN IT IN CURA OPEN IT AS A PROJECT
Layer height: 0.2mm Nozzle temp: 200°C Bed temp: 60°C Print speed: 50–60 mm/s Infill: 15–20% (grid or gyroid) Wall count: 2–3 walls Top/Bottom layers: 4–5 Cooling fan: 100% after first few layers Supports: Off (unless needed) Adhesion:…
Layer Height: 0.2mm Nozzle Temp: 200°C Bed Temp: 60°C Print Speed: 50–60mm/s Infill: 15% Supports: Off Material: PLA Cooling Fan: 100% after first layers Wall Count: 2–3 Adhesion: Skirt or Brim if needed
To wszystkie aktualnie dostępne wyniki.
