P
PrintablesEric
M12 Grizzly Drill Press Knob
A M12 knob to replace the broken knob on my Grizzly drill press. Used this thread library: https://dkprojects.net/openscad-threads/
- Pobrania
- 117
- Polubienia
- 16
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesEric
Inflation adapter for inflatables
Adapter so I can use my air compressor to fill our paddle boards. Compatible with a Leafield C7 Valve. Top accepts a Schrader Valve with 1/4" Male NPT such as:…
- Pobrania
- 109
- Polubienia
- 12
- Ocena
- 0
P
PrintablesEric
Lampshade
Best printed in a translucent filament. I used PETG. I designed this since the original lampshades were glass and made the lamp top heavy. Every time it fell over, at least one of the shades broke. These 3D printed shades are a lot…
- Pobrania
- 108
- Polubienia
- 25
- Ocena
- 5
P
PrintablesEric
Pedigree pouch squeegee
Designed for the Pedigree brand dog food toppers but should also work with other 100 gram (3.5 ounce) packets. Reasonably top rack dishwasher safe when printed in PETG (it might warp a bit but is still usable). ASA resists warping much…
- Pobrania
- 98
- Polubienia
- 30
- Ocena
- 5
P
PrintablesEric
Aeropress Wrenches
Wrenches to make it easier to remove the filter cover from a standard Aeropress or Aeropress XL.
- Pobrania
- 97
- Polubienia
- 27
- Ocena
- 5
P
PrintablesEric
REI Traverse Bear Vault Key
A quick print that makes opening the bear canister much easier. Just put the oval protrusion at the ‘back’ of the opening and push the front down to push in the locking pin. Then twist the lid. Do the same for the second locking pin. For…
- Pobrania
- 97
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEric
Hydration Bladder Dryer
I used this fan: https://www.amazon.com/gp/product/B07RP14KML/
- Pobrania
- 69
- Polubienia
- 36
- Ocena
- 5
P
PrintablesEric
Parameterized Arca Swiss plates and pads
A parameterized set of 5 different Arca Swiss styles plates - square, circle, hexagon, octagon and rectangular. Parameters included for standard ¼-20 and 3/8-16 bolts. Freecad 1.0.2 file included for further customization if desired. I…
- Pobrania
- 67
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEric
Trekking pole cover
Cover for the end of a trekking pole to help prevent damage to other items. Two different sizes - one for 10 mm tips and the other for 12 mm. Best printed in flexible filament.
- Pobrania
- 63
- Polubienia
- 5
- Ocena
- 5
P
PrintablesEric
Benchdog
Replacement bench dog for Wolfcraft clamping table. Should fit other benches with a 20mm hole.
- Pobrania
- 45
- Polubienia
- 12
- Ocena
- 0
P
PrintablesEric
Bench Dog 3/4 Inch
Bench dog for workbenches with ¾ inch holes such as the WorkMate.
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEric
Bench Dog for European Benches
Bench dog for European benches with 20mm holes. Updated Feb 8, 2025 to reduce height of the dog so it won't interfere with standard thicknesses of wood.
- Pobrania
- 29
- Polubienia
- 10
- Ocena
- 0
P
PrintablesEric
Hydration bladder dryer
I used this fan from Amazon: B07V2KVQB7 https://www.amazon.com/WINSINN-50x15mm-Turbine-Brushless-Extruder/dp/B07V2KVQB7
- Pobrania
- 29
- Polubienia
- 7
- Ocena
- 0
P
PrintablesEric
Aeropress XL filter cap wrench
A simple wrench to easily loosen or tighten the filter cap on the Aeropress XL. Prints in about 15 minutes in PLA on a Prusa MK4S.
- Pobrania
- 28
- Polubienia
- 8
- Ocena
- 0
P
PrintablesEric
M8 Nut for Comgrow SH02
Lost the nut for the filament feed out of the dryer. I tried other supposed M8 models but none worked. So I made my own. Printed in PETG at 0.1 mm layer height and 100% infill. Included the FreeCAD design file. The important adjustment is…
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
Hose Clamp for 10mm tubing
Just push it onto the tube to squeeze the tubing shut. Works with 10 mm silicone tubing. Best printed from PETG or another strong filament.
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEric
Carabiner adapter for small neck 1 liter Nalgene water bottls
Printed in PETG and seems very durable. I tried flex filament but it stretched and slipped of the neck of the bottle. For bet results, remove the lid and it's strap and put the carabiner neck attachment on the bottle, then reattach the…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEric
Phone tether
Small thin model that provides an attachment point for your phone. Insert between the back of your phone and the phone case. Best printed from TPU or other flexible filament.
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 5
P
PrintablesEric
Aeropress XL wrench
Minimal wrench to assist in removing the filter cover of an Aeropress XL. Prints in about 20 minutes.
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEric
Atomstack X20 gauge
Replacement gauge in case you lose your factory gauge for setting the height of your Atomstack X20 laser head. Included FreeCAD file for customization.
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
Grabber replacement part
A replacement part for the connector that allows the end of the grabber to rotate. These grabbers were sold at Costco around 2020 or so.
- Pobrania
- 16
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEric
Cap for IsoPro cannister
Small little cap to prevent dirt and damage to your IsoPro canisters. Best made from TPU.
- Pobrania
- 16
- Polubienia
- 8
- Ocena
- 0
P
PrintablesEric
Canoe Slalom Radius Gauge
Gauge to ensure a canoe slalom boat meets the ICF rule "3.2.4 - All boats must have a minimum radius at each end of 2 cm horizontally and 1 cm vertically." One version with logo from Potomac Whitewater Racing Center, Bethesda, Maryland…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
Pololu Pixy2 Plate
A plate to attach the Pixy2 pan/tilt to a Pololu Zumo robot base.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
Faster printing dog poop bag holder
A faster printing, lighter holder for dog poop bags. Uses a friction fit on the lid instead of threads. Holes in the bottom for string if you want to attach it to something.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
ICF canoe slalom gauge with text
Added text to show what each part of the gauge is measuring
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
IsoPro Stove Thread Protector
Simple cap to protect your stove.
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
Cooking Oil Container Coaster
Simple coaster to keep cooking oil off your countertops. I found that my oil spray bottle would sometimes dribble oil onto the countertops and designed this to contain it. If you print with a higher temperature filament (ASA, PA, PC) it…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
Benchdog V-Groove adapter - 20 mm European
An adapter for a European workmate style workbench to easier hold round objects. Make from TPU for a non-marring grip.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
Switch Cover for RaceGorilla Blue Box
Cover that can be installed over the rocker switches on the RaceGorilla Blue Box. https://www.racegorilla.com/products/racegorilla-bluebox/https://www.racegorilla.com/products/racegorilla-bluebox/ The lid has a snug fit and uses the…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
Replacement bumper for Amazon suitcase
Replacement bumper for an Amazon suitcase. The screw holes are 25 mm apart.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
Gasket for bathroom sink drain
Original gasket around the top of the pop up stopper in our bathroom sink fell apart. I couldn't find a replacement part so IO designed my own. Printed in TPE (flex) at 0.1 mm height. Takes about 10 minutes on my MK3.
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEric
Canoe Slalom gauge
Canoe slalom gauge based off of official ICF drawing found here: https://www.canoeicf.com/sites/default/files/icf_gauge_control_2023_v1.3.pdfhttps://www.canoeicf.com/sites/default/files/icf_gauge_control_2023_v1.3.pdf
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEric
Mini Canoe Slalom measurement gauge
Simple gauge that allows measurement of three common parts in canoe slalom. The two required radius for the nose and tail plus the radius for a kayak cross paddle.
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.