Liczymy pasujące modele…
Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu
Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…
This project is a modular 3D printed frame system, similar in concept to aluminum extrusion profiles, but fully printable and based on rectangular tubes. The frame is assembled by simply pushing together “male” beams with integrated clips…
A full size test bench with support of ATX/uATX/mITX motherboards and ATX PSUs. There is the option to print the motherboard mount in two parts with the longest dimension being 245mm which should be small enough for most printers; the…
An adapter from Gardena connector to a 1/2" - 13mm hose. You can use the ring seal of an original adapter but you can also print one with TPU (file included). Variant Gardena connector ½" - 13mm hose connector 1 1x 1x 2 1x 2x 3 1x 3x 4 2x…
Since mine broke I needed a new handle for the vacuum, there are three options with different end geometries.
This is a GameCube controller holder with or without a wire hook for mounting on the wall via adhesive strip or screw. Works for all official and 3rd party controllers I've tested. If you like my work and want to support me you can use my…
Holder for Fanatec wheels with QR1/QR2, mountable with M6 screws to your aluminium extrusion rig or with simple countersunk screws to a wall or wood.
Two little hooks to hold a Puky running wheel to a baby stroller (ABC Design Condor 4 Air). Update 06.09.2025: Added V2 of the grip holder, now with a hole to fix it to the stroller with a M4x10 countersunk screw and a matching nut.
A flag or spotter matrix LED array for sim racing. You'll need the following: Matrix LED PCB: https://de.aliexpress.com/item/32652524641.html?spm=a2g0o.order_list.order_list_main.140.41435c5fNwfGF4&gatewayAdapt=glo2deu Arduino Pro Micro…
A common problem with AiOs and modern CPUs is the lack of VRM cooling around the CPU socket. With this adapted cap you can mount any 92/120/140mm fan (with a 82,5/105/125mm hole spacing) to ensure sufficient airflow over the VRM…
My case for a VoCore5 with a 24 segment LED light. You'll need: VoCore 5" https://vocore.io/ Arduino Pro Micro https://de.aliexpress.com/item/32768308647.html?spm=a2g0o.order_list.order_list_main.27.228f5c5fFbl5NE&gatewayAdapt=glo2deu 2x…
An adapter to mount a Reolink E1 camera to a GoPro mount
This is a stand for the Lego Millenium Falcon 75105, should work with 7965 too. The supported angles are 10° (standard) and 20°.
A common problem with AiOs and modern CPUs is the lack of VRM cooling around the CPU socket. With this adapted cap you can mount any 120mm fan (with a 105mm hole spacing) to ensure sufficient airflow over the VRM componnents. No supports…
To connect a 80mm drainage pipe to a DN 125/110 KG-pipe
I combined four top bars into one big bracket to mount three 40mm fans to cool the RAM chips. The bracket mounts to the RAM with the same screws as the stock bars but to remain compatible, I created two elongated holes instead of the…
A Rainbow 6 Siege Logo Cookie Cutter Merry Christmas I guess
A simple 1:10 model of the Klipsch Reference R-101SW subwoofer.
An adapter to use a standard 70mm steering wheel on a Bobby Car, you can use the included screws to mount the adapter on the car and need six countersunk M5x16 screws and matching nuts to mount your 70mm steering wheel. The little arrow…
An Adapter for 25mm water pipes to feed it through corrugated pipes or larger pipes with internal edges much easier.
Added stripes to the Dominator titanium top bars
A holder for the Fanttik F2 Master to screw to a wall
A Spacer if you use the Button Clusters on the Fanatec Podium Hub without the need to use the provided washers.
Get rid of printing smell and fumes with this 120mm fan filter. You'll need to print: Shroud_fan Shroud_filter Duct (optional, but recommended due to better airflow) Additionally you'll need: 120mm fan (I used a Nocuta fan running at 12V…
The adapter is either print in place or you can print the parts seperately if you want, you'll need an M8x20 cylindrical bolt and a matching nut. This adapter works on any bike with a handlebar with a diameter of 20mm.
A bracket to turn a Fanatec CSL pedal into one with active feedback, here I'm simulating wheel lock and active ABS for my loadcell brake and tyre slip on the accelerator pedal. I'm using the CSL pedals with the tuning plates, mounting…
I have an unused electrical box and wanted to cleanly mount my Velux remote (3LI D11 WW) for my roof window to it. You'll need two small wood screws to mount the remotes bracket to the printed adapter bracket and the electrical box screws…
Ad adapter for smaller sunshades to hold them more securely. The inner diameter fits sunshades with a total diameter of 37mm maximum and a inner diameter of the holder of 55mm minimum.
Added the face of an enderman from Minecraft to the Titan AiO cap from Corsair. There are two versions: opaque: the eyes are holes so the light (purple recommended) can shine through translucent: part of the eyes are thinly printed if you…
Ore or hay/grass to transport with Brio trains. Printed without support and fuzzy skin.
These are adapter rings for 3DJakes PLA, PETG, ASA and TPU spools. Before printing, double check the dimensions in the file name with your spool, 3DJake has some variants of similar spools and if you encounter one that I haven't uploaded…
Easyloader for loading weights on a barbell lying on the floor, the radius is 20cm for any kind of weights and lifts them 1cm above the floor.
Added the face of a creeper from Minecraft to the Titan AiO cap from Corsair.
A snare drum cam slide throw-off for Ludwig Super-Sensitive Snare
A hook and eyelet fitting for 868 mesh fencing (Doppelstabmattenzaun). You'll need 1x Back and 1x Hook_1 + 2 or 2x Eyelet with 4x M4x4 inserts and 4x M4x20 countersunk screws. In addition, there is a mailbox holder you can use if the…
To wszystkie aktualnie dostępne wyniki.
