Liczymy pasujące modele…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
All parts need support Printed using PLA
All parts needs supports Printed using PLA
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
All parts need support Printed using PLA
Discord for updates: https://discord.gg/yfdSb Do take note the Brown Stand on the other AMX 13s is not printed for this model. Some parts need supports Tank Antenna used filament Printed using Bambu Matte PLA
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the hull is a reuse of the Panzer 4 H, I ran out of filament to print another set. the cannons are 4 cut black filaments and there is one connecting…
All parts need supports Printed using PLA
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4s.…
Some parts need supports Tank Antenna used filament Printed using Bambu Matte PLA
Discord for updates: https://discord.gg/yfdSb Do take note the tracks in the picture are the low details version. The cannon and martlet assembly can be changed for other cannons made for the Panzer 4 Some parts need supports Printed…
Discord for updates: https://discord.gg/yfdSb Do take note the Brown Stand on the other AMX 13s is not printed for this model. Some parts need supports Tank Antenna used filament Printed using Bambu Matte PLA
Discord for updates: https://discord.gg/yfdSb Some parts need supports Tank Antenna used filament Printed using Bambu Matte PLA
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Do as u please. If you want to 3D print it pls edit to your liking. layers and details heights are 0.01 in height. change if you wish to 3D print with FDM printers
Printed using ESun PLA+ Green and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
Do as u please. If you want to 3D print it pls edit to your liking. layers and details heights are 0.01 in height. change if you wish to 3D print with FDM printers
The scale is roughly 7:500 Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
Scale: about 1/45.5 Some parts need supports Printed using Bambu Matte PLA Do take note the hull is a reuse of the Panzer 4 H, I ran out of filament to print another set. The cannon is 1 cut black filaments and there is one connecting the…
Printed using ESun PLA+ Dark Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
More Petite Tanks i made over the days. new one includes FV4005, Centurion 1 and Hunter IFV. As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
Printed using ESun PLA+ Light Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
Printed using ESun PLA+ Light Brown and Black Tank itself needs supports print it where the top is facing upwards Super glue is required as well Raw un-melted filament for the gun Made for keychain and desktop display Discord for updates:…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Light Brown and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards.…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Since i made so much French AMX 13s recently i made this to fit in the theme, not able to print this version because i don't have the colours needed and a MMU. Model needs MMU, colour separated by layers excluding Black No supports needed
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height.Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Light Brown and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards.…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made an update to the old design and made a keychain version as well, not able to print this version because i don't have the colours needed and a MMU. Model needs MMU, colour separated by layers excluding Black No supports needed
Made for keychain and/or Tabletop display Printed using ESun PLA+ Light Brown and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards.…
As per normal those who are keen on making ur on ones, the files are free and for those who wants to 3D print them but if u cant print them, im selling 1 for $5 SGD, shipping depend on where u are ( u may need to get alot of them for it…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Light Brown and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards.…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Light Brown and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards.…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Hate that the IBasso DX180 on button is too exposed and it gets ur volume go SUPERRRRRRR LOUD suddenly? Here's a simple fix only downside for design is u need the 3M Velcro and only works on the original casing or no casing. Printed with…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
To wszystkie aktualnie dostępne wyniki.
