Liczymy pasujące modele…
This is a Wendigo / Forest spirit / Leshen (from The Witcher) / Krampus costume set. Now with detachable horns and antlers! It's remixed from other things (see remix sources). ======= SCALE IT PROPERLY ======= UPDATE 2024-09: I have added…
This is a brush holder for your makeup brushes. Made to fit: 2 large brushes (15mm ø) 1 large brush with flat handle (20mm×10mm) 10 medium brushes (0.9mm ø) UPDATE: Added hexagon cavities to add weight to the holder. Add custom G-Code to…
The anatomically correct heart, but made as a solid body. No hollow-outs, no polygon intersections. Should be “water tight”.
A wider guitar pedal box (thus M size), with different pots configutations This is a Remix of great original guitar fx pedal box by DoomMaster. This model has left, right and rear 12m holes for In, Out and power connectors. There're…
This is a Remix of great original guitar fx pedal box by DoomMaster. This model has left, right and rear 12m holes for In, Out and power connectors. There're models for: 1 potentiometer (e.g. Speed knob for phaser) 2 pots (e.g. Volume and…
The swappable style for Modulcaster guitar - a hollow body jazz guitar with F-shaped cutouts and surface mounted bridge stylization. Based on the original Les Paul design by @Katarn It is initial release of the model. It has no alignment…
It's a more advanced crystal generator, based on Teevax and Ferjerez's generator versions. You can now adjust the count of generated crystals, their sides count, their length and proportions. You can also adjust the base. There's only an…
Steering wheel adapter for Logitech G25 base mount. It's a remix of a model by @vasilp. What's changed Height is +4mm Added wide central recessed part to fit central horn-button from racing wheel This object was made in Tinkercad. Edit it…
I wanted to know if some mod is available for my new Ender3 V3 SE printer, but it's gantry mount plate seem to have not been documented/modelled yet. So, I made this reference model assembly for the modding community. The base metal…
A squares grid pattern to use with bed leveling with 7x7 points. This grid should fit 220x220 beds with enough space left on bed in blind spots: areas where 3D Touch sensor cannot reach due to probe offset. Initially, this model was…
This is a case for MKS MINI 12864 v3 with front SD card load. It's made to be mounted on Ultimaker clone with 10mm front panel, on top of the MKS MINI 12864 v1 holes. Designed to be assembled with M3x16 screws. Use glue to attach the…
Screen case for a version of Makerbase MKS mini12864 v3 LCD screen with front-loading SD card slot. Use mounting brackets remix parent model by @Voxel3D_Nederland.
Description This is a mod to make your printer quiet and still be symmetric with a nice outside shroud to cover everything inside. This design is intended to be the one to upgrade your Ender3 V3 SE from start: works on stock Ender3 V3 SE…
A cap for your Floyd Rose' stratocaster tremolo / vibrato / whammy bar. Snug fit for 5.2mm bar, scale differently for better fit. Use scarf Z-seam to eliminate inner hole bump.
This is a convenience wiring jig for assembling the electric guitar wiring of your Les Paul, Flying V, SG, Stratocaster, PrusaCaster or Telecaster guitar. Stick your parts into holes for T one, V olume, J ack and S witch and begin your…
A mounting plate or mounting bracket for humbucker. Made for flat body surface, but fusion file is included, so can be adapted for your needs or used as a reference.
A dummy cutout model to make a routed cutout in a guitar body. Use it to binary-subtract it from your guitar body model for further 3d printing or cutting with router. 2024.03.22 UPDATE: made "earflaps" recess 1 mm longer on each side
Quick print vase mode stackable tray box for mechanical keyboard keycaps. Holds up to 120u of keycaps. Prints both tray and lid in vase mode.
The original Modulcaster core part split to fit smaller printers and reinforced with two 8mm steel rods. Printable files There're different bridge files: original modulcaster one to fit Harley Benton bridge and altered one to fit…
A single coil pickup base plate with decorative cap cover. Intended for use with coils wound directly onto a bar magnet, or use only decorative cover (does not toake into account magnet poles!)
A sturdy spindle high enough to handle large bundles of yarn for respooling. Some tools, like tufting gun, requires uninterrupted yarn flow without tension, which is easier with conical bobbins of yarn. This spindle is designed for…
This is a simplified version of prisms of the original PrismLume (see remix source). I have remodeled it from scratch after the original prisms to remove brittle snap-fit flaps. They should be drop-in replacements for original Prisms.
This is a modified version of small 3x3 and medium 6x6 bases by @crazy_format. It gives more room for wiring and also adds a cavity at the bottom to put your ESP2866/ESP32 module into. The wireless module cavity should fit any reasonably…
This case is for the GPS-less Heltec V4 (ESP32-S3 WiFi LoRa 32 V4), powered by a single 26650 Li-ion cell rather than the 18650 most other Heltec V4 cases assume. If you're running a node off a bigger cell for longer runtime and haven't…
This is a reference model of 2in1-S1 extruders by different vendors such as Bigtreetech, Lerdge, XCR and so on. It's based on 2in1-v2 model by @darwin-de (see remix source). Provided are STL, STEP and Fusion 360 (f3d) files. Category: 3D…
This is my take on Ultimaker heated bed cover to hide leadscrew nut and alignment rods. It's designed to be clipped-on the 4mm aluminum bed base plate, without any screws, which should help if your bed plate is from a knock-off Ultimaker…
These are simplest round templates for making pasties / nipple stickers. STL files come in 40mm diameter, but I have also included STEP files for easier adjustments. There're multiple options: with single slot — ranging from 20° (for…
To wszystkie aktualnie dostępne wyniki.
