Liczymy pasujące modele…
Charmander model for home decoration settings: no supports 0.2 quality PLA-ABS-PETG-TPU filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Lithophane Deadpool 30% infill pla , petg or abs 0.2 quality no supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Wydruk około 8,13 €–9,94 € nettoWstępna wycena jednego wariantu
Cute unicorn 25% infill , pla ,petg , abs fillaments Multicolor print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print in place Desk organizer with usb and sd card support Settings: 0.3 quality 50% infill No supports PLA Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy print in place Cable management Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print for the corners it can be used TPU to be more flexible. The set has single double triple and…
I have tried to make my own version of hulk parts. My work is in progress so if you have feedback is welcomed. Some parts are missing and not been upgraded yet. 28/11/2023 - Added left and right fist 29/06/2024 - Added new head ,and left…
Easy print in place Cable management hook Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Christmas Ornament Merry Christmas Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Halloween decor Witch This is super easy to print model that require no supports. - 0.2mm layer height - 100% infill Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy print in place Cable management Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print it can be used TPU to be more flexible. Njoy All comments are welcome Below is the link with all my…
Hellokitty 25% infill , supports yes 0.2 quality, pla The model already includes paint-on support structures as well as paint-on coloring. It can be printed as single color or multi color version. Njoy Below is the link with all my…
This is an easy model to print Settings: quality 0.2 100% infill for the best results All types of filament can be used Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Toyota keychain Pla Abs petg Tpu are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament tree Settings: 0.2 quality 100% infill Use supports PLA - PETG - ABS Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print in place Desk organizer Settings: 0.3 quality 50% infill No supports PLA Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Chevy keychain Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Parkside battery holder easy to print , follow my orientation to avoid supports , the model must be upright 50% infill , 0.2 quality , pla , petg and abs filaments are good Njoy Below is the link with all my designs…
Halloween Keychains These are super easy to print models that require no supports. Print settings : - 0.2mm layer height - 100% infill - PLA Black for spider and spider web , White for skull, PLA Orange for evil pumpkin and Dark Violet…
Settings: 0.2 quality 100% infill Pla No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Small easy to adjust cable management hook. easy print on the side and use PLA Keep the infill above 50% Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Christmas Ornament Snowman Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Halloween decor This is super easy to print model that require no supports. - 0.2mm layer height - 100% infill Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Peugeot keychain Pla Tpu petg abs are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
I created this suspended Heart artwork using bridges for the strings. You don't need any supports. It prints in 0.2 - 0.3 mm layer height and wall generator set to Arachne in Bambu Studio. In Cura or PrusaSlicer you need to select Print…
Dead pool mini character 25% infill, pla ,petg and abs are good for this print Supports needed Can be multicolor print if you paint the model inside slicer Njoy Below is the link with all my designs…
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill pla no supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas ornaments Settings: 0.3 quality 40% infill no supports PLA Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
PIONEER DJ SET KNOBS The size can be adjusted in the slicer 25% infill ,quality 0.2 supports yes , pla Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Christmas Ornament Merry Christmas Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Deadpool toy 25% infill , 0.2 quality supports yes , pla multicolor can be added in slice program or it can be printed white and painted after Njoy
Easy to print Nativity Scene For home or for gift Settings: 0.2 quality 60% infill PLA No supports (Be carefull about the orientation of the print) Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
This is a remix from Tom's https://www.printables.com/model/173159-simple-gopro-9-gopro-10-gopro-11-battery-case/remixes I have the gopro9 and I have 3 batteries so I took the file and I've made for two batteries , for three and four…
Easy to print Nativity Scene For home or for gift Settings: 0.2 quality 100% infill PLA No supports Njoy
Easy to print Halloween Freddy shape Settings: 0.2 quallity or better 100% infill All filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Chucky Halloween 0.2 quality 100% infill All filaments are good for this print Njoy
easy to print Darth Vader sliced bust Njoy Happy printing
East to print Christmas Latern This design can be used as ornament if you scale it down. Whatever you put inside for light is at your own risk Be aware that PLA and all the plastic that we use in printing are flamable It would be better…
Easy to print in place carnival mask. The original goal is to be printed in TPU an use rubber band to keep it in head. But it can be printed in PLA as well and glue one small wooden stick on the side. Either way have a great print No…
Easy to print Christmas Ornament Snowflake Settings: 0.2 quality or better 100% infill All filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Deadpool miniature This is a multicolor figure but it could be printed monocolored 25% infilll , pla quality 0.2 , supports yes trees Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy print in place Cable management hook Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print Njoy All comments are welcome Below is the link with all my designs…
Settings: 0.2 quality 100% infill PLA No supports Njoy
Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Christmas Ornament Merry Christmas May the dark side of the force be with you!!! Settings: 0.2 quality 100% infill PLA No supports Njoy
Easy to print Christmas Bell Settings: 0.2 quality 100% infill PLA - ABS - PETG Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Desk organizer Settings: 0.3 quality 50% infill PLA Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill pla No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Hellokitty 25% infill , supports no 0.2 quality, pla The model already includes paint-on support structures as well as paint-on coloring. It can be printed as single color or multi color version. Njoy Below is the link with all my designs…
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
These are super easy to print models that require no supports. Print settings : - 0.2mm layer height - 100% infill Print as many you like Happy Halloween Njoy
Easy to print Christmas bells ornaments There are two types The bell with the stars cut need supports , 0.2 print quality and 100%infill The bell without stars no supports are needed 0.2 print quality and 100%infill All filaments are good…
Christmas Ornament Settings: 0.2 quality 100% infill pla No supports Njoy
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy
Easy to print Spartan Helmet Decor Settings: 0.2 quality 100% infill All filaments are good for this print Njoy
Thundercats model for home decoration settings: no supports 0.2 quality PLA-ABS-PETG-TPU filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Merry Christmas Ornament Settings: 0.2 quality or bbetter 100% infill All filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Pirate Ship Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print New year 2024 Glasses Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Nativity Scene (ornament) Settings: 0.2 quality 100% infill PLA Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Christmas ornament Horse toy Special Settings: 0.2 quality 50% infill PLA Use supports Njoy
Easy to print Christmas Angel with Trumpet ornament Settings: 0.2 quality or better 100% infill All the filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
This is an easy to print gopro mount for the DJI AIR 2 and AIR 2 S drones. All gopro from 7 to 12 are suitable with this mount Keep infill 100% Njoy If you like my model pls hit the like button it helps a lot
Charizard model for home decoration settings: no supports 0.2 quality PLA-ABS-PETG-TPU filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Pirates of the Caribbean dead mans chest coin easy to print No supports all filaments are good for this print infill can be 15% and above keep the walls 3 layers and above Njoy Below is the link with all my designs…
This is a threaded container well build for small things it can be used for cables , coins , sd cards , money etc This design is in progress and it may have additional versions in the near future. Print : 0.2 quality PLA filament Njoy
Easy to print Halloween Pumpkin Settings: 0.2 quality or better 100% infill All filaments are good for this print Njoy
Easy to print Captain America Shield wall decor Great gift for children . Settings: 0.2 quality 100% infill No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Strawberry-shortcake The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Angel Ornament Settings: 0.2 quality 100% infill No supports All filaments are good for this print Njoy
Michael Jackson Bust 25% infill , pla , abs , tpu , petg fillaments are good Supports needed Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Jason Mask Settings: 0.2 quality or better 100% infill All filaments are good for this print Njoy
This is the perfect guitar plectrum After many tries I ended with this plectrum I have tested with PLA and it's perfect Njoy
Easy to print Halloween Castle Pla ,Tpu,abs,petg are good for this print No supports needed Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Santa Clause Sleigh decor Settings: 0.2 quality 100% infill All filaments are good for this print Njoy
Easy to print Christmas Star ornament Settings: 0.2 quality 100% infill PLA No supports Njoy
Nativity scene in Christmas tree ornament 25% infill , 0.2 quality Pla , petg and abs filaments Supports yes Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Witch on the moon decor Settings: 0.2 quality 100% infill No supports ALl filaments are good Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Angel with Trumpet ornament Settings: 0.2 quality or better 100% infill All the filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy print in place Cable management Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print for the corners it can be used TPU to be more flexible. Njoy All comments are welcome Below is the…
This is the set of notes that can be used as door stopper Settings: 0.2 quality or better 100% infill PLA - PETG -ABS are good Njoy
Easy to print Christmas ornament snowflake Settings: 0.2 quality 100% infill All filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy
Simple cellphone stand for all the cellphones . It can be printed in TPU or in PLA, ABS , etc Best orientation for printing is on the side, walls must be at least 2 , top and bottom same 2 infill above 50%. Njoy
Easy to print Christmas Ornament Setting: 0.2 quality 100% infill Pla - Abs - Petg Njoy
Easy to print Christmas Ornament Snowman Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Zeus bust ancient Greek god 25% infill , pla petg abs filament supports yes ,0.2 quality Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill pla Njoy
Easy to print Grim Reaper for Halloween Settings: 0.2 quality 100% infill Njoy
Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Easy to print Halloween Ghost Settings: 0.2 quality or better 100% infill All filaments are good for this print Njoy
