P
Printablesdg fpv
tbs source one v5 pressfit arm protection
made to be pressfit screws are passthrough so tpu is not inbetween the screw and the arm.
- Pobrania
- 534
- Polubienia
- 46
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
Printablesdg fpv
walksnail vtx v1 protection mount v2
buymeacoffee.com/dgfpv this is the version 2 of my walksnail vtx protection mount. i have changed the overall design, added 0.4mm walls to make them slightly stiffer, also added 20x20 mounting holes for the walksnail vtx v2
- Pobrania
- 421
- Polubienia
- 31
- Ocena
- 5
P
Printablesdg fpv
micro sd card box
carry on with 0% infill 2 perimeters fast to print boxes. this one is for all your micro sd cards :).
- Pobrania
- 389
- Polubienia
- 41
- Ocena
- 4,5
P
Printablesdg fpv
utility knife scraper remixed
do not want to take all the credit. this is a remix with a bit more comfortable corners as well as a top blate that holds down the knife. 2x m3 4.2x3mm inserts nuts needed.
- Pobrania
- 365
- Polubienia
- 62
- Ocena
- 5
P
Printablesdg fpv
radiomaster boxer - pocket antenna mod v2 (updated)
buymeacoffee.com/dgfpv Push the pin out of the original hinge and swap it with the 3d printed one. Unscrew the sma adapter. The inner counterpart needs to be glued to the inside - from inside of the to the outer bracket. Be very careful…
- Pobrania
- 314
- Polubienia
- 31
- Ocena
- 0
P
Printablesdg fpv
Curvy Cam Lock Bag Clip M3 Screw Remix
since i had a hard time with the given tolerances i just remixed the clip for 2x 4,5mm insert nuts and 2x 10mm m3 screws.
- Pobrania
- 242
- Polubienia
- 45
- Ocena
- 4,86
P
Printablesdg fpv
walksnail goggle x lens cover
buymeacoffee.com/dgfpv this is meant to be printed in tpu. The nose on the back should be pushed in the infrared sensor between the lenses.
- Pobrania
- 236
- Polubienia
- 21
- Ocena
- 5
P
Printablesdg fpv
walksnail fpv goggle protection
added the Logo to the protection and shortened the protection by 2.5mm to make it a bit looser fit. probs to NordFPV for the design. https://www.printables.com/model/244448-walksnail-fpv-goggle-protector
- Pobrania
- 194
- Polubienia
- 24
- Ocena
- 5
P
Printablesdg fpv
walksnail vrx front mod .step
walksnail vrx front mod .step file
- Pobrania
- 171
- Polubienia
- 6
- Ocena
- 0
P
Printablesdg fpv
walksnail 1s horizontal cam mount
walksnail 1s horizontal cam mount
- Pobrania
- 166
- Polubienia
- 9
- Ocena
- 5
P
Printablesdg fpv
walksnail goggle x narrow face shim
tpu recommendet. infill as you like. maybe use some sort of velcro or double sided tape to get it fixated :).
- Pobrania
- 159
- Polubienia
- 20
- Ocena
- 0
P
Printablesdg fpv
atomrc dolphin - speedybee f405 wing + walksnail gps mount
bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed
- Pobrania
- 154
- Polubienia
- 15
- Ocena
- 0
P
Printablesdg fpv
radiomaster tx12 gimbal protection
i disliked all the gimbal protections i found online so i designed this one…
- Pobrania
- 144
- Polubienia
- 9
- Ocena
- 0
P
Printablesdg fpv
walksnail goggle x battery strap 25mm extender
Print standing. Support needed… Needs some gentle force to pass through.
- Pobrania
- 143
- Polubienia
- 14
- Ocena
- 0
P
Printablesdg fpv
troy dgfpv 3inch fpv frame
buymeacoffee.com/dgfpv little 3d printable 3inch fpv frame. you need: 25.5x25.5 flight controller (min 15a) walksnail 1s vtx 1404 motors 3inch propellers 4x 22 or 25mm m2 stack screws (depending on your stack high) 12x 6mm m2 screws…
- Pobrania
- 117
- Polubienia
- 25
- Ocena
- 0
P
Printablesdg fpv
walksnail goggle x no led remix
simply remixed the front plates because i dislike the glossy led front. If it doesn't clip in just remove the top clip and thinen the bottom noses.
- Pobrania
- 101
- Polubienia
- 10
- Ocena
- 0
P
Printablesdg fpv
iflight commando 8 gimbal protection
iflight commando 8 gimbal protection
- Pobrania
- 100
- Polubienia
- 6
- Ocena
- 0
P
Printablesdg fpv
apex dc clone arm protection - press fit
no screws needed. just pressfirt
- Pobrania
- 80
- Polubienia
- 7
- Ocena
- 0
P
Printablesdg fpv
aos 5 pressfit arm protection skid
I dislike arm protections that fixate the protection with the motor screws so i designed my own one for the aos5v2 as pressfit, tight and easy to install :)…
- Pobrania
- 74
- Polubienia
- 3
- Ocena
- 0
P
Printablesdg fpv
ts100 tip stand
infill as you like (0% works too), 2 walls.
- Pobrania
- 71
- Polubienia
- 13
- Ocena
- 5
P
Printablesdg fpv
atomrc dolphin wing tip replacement + template
One side of the wing tip ripped off so I designed this one. I also uploaded a template for a precise cut at the right spot. It is not perfect but better then flying with a broken tip.
- Pobrania
- 68
- Polubienia
- 6
- Ocena
- 0
P
Printablesdg fpv
apex dc clone 5" micro cam mountingplate
you obviously need to print mirrored :). snugs in place like a charm!
- Pobrania
- 64
- Polubienia
- 3
- Ocena
- 0
P
Printablesdg fpv
zohd dart xl extreme 19mm cam mount
zohd dart xl extreme 19mm cam mount
- Pobrania
- 49
- Polubienia
- 1
- Ocena
- 0
P
Printablesdg fpv
demibot clone micro cam thorn mount
demibot clone micro cam thorn mount No guarantee it fits the original!
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
Printablesdg fpv
aos5 v2 walksnail gps mount
gps mount for the official walksnail gps
- Pobrania
- 45
- Polubienia
- 3
- Ocena
- 0
P
Printablesdg fpv
dbot clone claw skid v2
buymeacoffee.com/dgfpv It's a very tight fit at least for me. It's meant to be tight so it doesn't create additional vibrations since it is purposely not using scews. Test print how it fits for you first. i designed this motor/arm…
- Pobrania
- 45
- Polubienia
- 2
- Ocena
- 0
P
Printablesdg fpv
sapphire pro anti z wobble
this is a stiffrer z wobble remix for the sapphire pro also it is for smaler m3 screws and t-nuts. it still needs a 688zz bearing.
- Pobrania
- 36
- Polubienia
- 8
- Ocena
- 0
P
Printablesdg fpv
walksnail goggle x lens cover replacement
buymeacoffee.com/dgfpv you need: 25.5mm diameter glass printed from tpu walls only
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
Printablesdg fpv
walksnail goggle x the beam mod
buymeacoffee.com/dgfpv you want the beam? you need: patches - prodrone triple feed patch tiny tfp antenna pigtail - SMA F to RPSMA M m2 14-16mm x2 m2 insert nut x9 m2 6mm x9
- Pobrania
- 31
- Polubienia
- 12
- Ocena
- 0
P
Printablesdg fpv
easy star walksnail cam + vtx front mount
you have an old gen1 easy star like me? make it digital :)!
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.