Liczymy pasujące modele…
I have included a 5mm bore version and also a solid version so you can add whichever size bore you need. Printed 0.1 layer height in PETG Be careful torquing down on the threads as they will shear. I manage to connect both threads and…
I have included a solid and hollow option if you want to add some weight to your baren like I did, use some pennies and resin. You will need 7mm ball bearings and 3 x m3 nuts and bolts. Build + Info Category: Art Tools
Simple clamp to fit 100mm/4 inch ducting. Hole diameter is 6.5mm so will fit M6 bolt
This setup is for a 6mm router bit. I have made the bushing slightly undersized (16.6mm instead of 17mm) so you can add aluminum tape around the bushing wall to incrementally enlarge the hole until you get the perfect fit for your MFT…
I'm a little late but I wanted to create something to celebrate the 2019 anniversary of my favourite film. Enjoy! Silicone Rubber for moulds - (US) https://amzn.to/2u0lIMW | (UK) https://amzn.to/2SCZQSh Cement - (US)…
I CNC machined the screen frame from Iroko hardwood and the backing plate is machined from aluminum plate. Both of these can be 3d printed instead. The mounting plate is bolted to the angle bracket with M6 bolts.
Large knob for m8 hex bolts
Simple spacer that clips onto edges of frames (standard 40mm aluminum frame). I stick a fan heater in the room and dries the very quickly. Category: DIY
The nozzle can be 3D printed but not the manifold section. It is too porous and will leak. I would recommend making the manifold section from a metal block, then drilling and tapping holes and threads. Nozzle Bore Diameter 2.2mm Nozzle…
Thanks to https://www.thingiverse.com/thing:1114555 for the original design, I needed this to go on my wall so I chopped off the top hook and added an extra hole for an additional screw. If you orientate it the way shown in my screenshot…
Simple 5x5 holder for 5C collets. 200x200mm 50mm height
(skip to 3:40 to see the support in action)
Touchplate is split into 2 parts and glued together with some superglue. All you need to do is then cover it in aluminium foil and you have yourself a very cheap touchplate for your cnc projects. Check out the video below which will show…
Holder for Wiss M3R Snips
Nozzle thread = M12 @ 1.75mm pitch Pipe threads are both 1/8 BSP
This is a simple clamp that will stop your Flair espresso maker from slipping on the countertop when pulling an espresso. Have included a shelled version in case you want to infill with resin to strengthen it. I printed with 8 walls and…
To wszystkie aktualnie dostępne wyniki.
