P
PrintablesRob C
Poop Dumpster
Originally made for an AD5x, at 3" high this poop dumpster will fit most printers. plain bottom is to make it more printer friendly than the scale dumpster models
- Pobrania
- 675
- Polubienia
- 60
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesRob C
TOOL CUP FOR AD5X
This holder mounts on the base of the spool holders and keeps small tools available right at your printer I posted another smaller one just for holding an alcohol spray bottle. matching set style matching cup for dollar store spray bottle…
- Pobrania
- 286
- Polubienia
- 61
- Ocena
- 4
P
PrintablesRob C
Wrench Holder, ICON
This is a space-saving holder for the Harbor Freight ICON line combination wrenches, specifically designed to hold the 14 piece (5 through 19mm) AND the 5 piece large (20-24mm), cause why would you have one without the other? May fit…
- Pobrania
- 262
- Polubienia
- 69
- Ocena
- 0
P
PrintablesRob C
CLEANER BOTTLE HOLDER FOR AD5X
I like to keep all the tools and accessories for my printer with my printer, so I've made holders like this to keep files, styli, picks and screwdrivers right where I need them. This one holds a small spray bottle I got from the dollar…
- Pobrania
- 168
- Polubienia
- 43
- Ocena
- 5
P
PrintablesRob C
radio knob for 6mm D shaft
replacement knob for my car radio. The stem is long and thin to accomodate a shaft that was sunken into the bezel, but will work on almost all pots with 6mm d shafts
- Pobrania
- 128
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRob C
Icon Stubby Wrench Holder
toolbox organizer made specifically for ICON stubby wrench set, 10 to 19mm. May fit other brands, I don't know, but I don't see why not. orients the set to take up minimal drawer space, but doesn't let them touch and get all scratched up…
- Pobrania
- 84
- Polubienia
- 43
- Ocena
- 0
P
PrintablesRob C
Craftsman Wrench Holder
This is a holder for a craftsman raised beam metric wrench set, 8 pc: 10 to 18mm.
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRob C
Resistor lead bender, modified
Remix of TimMJN's great resistor (and diode) lead bender. This mod does not address functionality, which was great to begin with, only ergonomic issues. TimMJN's original design was very functional and does a great job bending resistor…
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRob C
IFS Lift-o-Matic Bracket
small bracket for raising the AD5X IFS bracket to clear spools and better fit the enclosure kit requires two 3mm x 10 mm long screws, two washers, and 2 nuts for the IFS bracket. Reuse the old 3mm screws for the bottom holes.
- Pobrania
- 43
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRob C
A toy train I made for a friend's train-obsessed child
This is a toy train engine for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRob C
Hobby Knife Cap
After i stabbed my finger brushing off my workbench, I had the bright idea to do something about the sharp blade that I always leave out. Best to make from something soft, these are TPU, but whatever, I don't judge.
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRob C
Modular Shelf for 60x130 parts boxes
I've been getting little fastener assortments from Aliexpress lately and they were starting to make a mess. This stackable, modular, storage unit have me a place to put lots of those little 60 x 130mm containers. Start with the base plate…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRob C
A toy train flat car I made for a friend's train-obsessed child
This is a toy train flat car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Pobrania
- 18
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRob C
GPU Support
An Apollo Program inspired graphics card support. Fits Lego figures (see pics). (Yes, I know the orbiter didn't land on the moon and certainly didn't have landing gear, but dude, chill out, we're just having fun) Also has a 5mm port if…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRob C
ICON Ratchet Holder
a holder for three ICON (and probably many other) ratchets, 1/4, 3/8 and 1/2. includes finger slots on the edges to make picking up easier. Magnet pockets on the bottom to glue in some 10mm round magnets for keeping put in the drawer.
- Pobrania
- 17
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRob C
A toy train tanker car I made for a friend's train-obsessed child
This is a toy train tanker car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Pobrania
- 16
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRob C
A toy train hopper car I made for a friend's train-obsessed child
This is a toy train hopper car for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. ***check my profile to see the other cars in this set!***
- Pobrania
- 16
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRob C
A toy train I made for a friend's train-obsessed child
This is a toy train engine for a kid who's going through a rough patch. Aside from the locomotive, there is also a tender, box car, hopper, tanker, flat car and caboose. There are provisions to put a switched LED on the nose of the…
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRob C
A toy train caboose for children
This is the caboose for a toy train I made for a friend's kid who is going through some tough times. Inside there are details for the living quarters and the roof is removable for play-ability see my profile for all the other cars in the…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRob C
Desiccant Bottle
holds a good volume of desiccant, and then it goes into the center hole of your spool, so you can put the whole thing easily into a freezer bag. Pops out easily. If you have tight threads, print the cap at X=102%, Y=102% Z=100%
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRob C
holder for thumbwheel ratchets
toolbox drawer holder for thumbwheel ratchets, keep your junk organized: one hole each for ¼, 3/8 and ½" drives. Wide base so you really have to slam your drawers like a gorilla to get these to fall over, but hey, I don't judge. matches…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRob C
Hex Bit Holder
Remix od RPR Designs's pegboard tool holder available here: https://www.printables.com/model/1460263-pegboard-impact-driver-bit-holder-6-24-bits-option
- Pobrania
- 11
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRob C
Sixes and Sevens
Its a bunch of sixes and sevens of different fonts and different sizes. Why? I dunno. I really don't.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRob C
Cover/Wrist adaptor for Mastfuyi FY106B multimeter
Make this out of a soft filament like TPU, it will NOT work with PLA or other rigid plastics This is a protective cover for the Mastfuyi FY106b (probably fits the 106A too, not sure) but also has slots on the back to run wrist straps (i…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRob C
holder for 3 pc socket cap set
holds the harbor freight socket cap sets… other brands too most likely.
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRob C
Tailstock Tray for g4003 lathe
tray mounts to the top of your G4003 tailstock, helps hold drills and all the other random tools that accumulate. 4mm threaded inserts are recommended for the pinch screws, but you can secure it however you want
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRob C
SWITCH PLATE SURROUND
a fun frame for my wife's dragon switch cover... it also hides the hole in the wall that was a littler bigger than her plate. Fit this onto your cover plate from behind and install your cover plate as normal
- Pobrania
- 7
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRob C
SPark Plug Socket Holder
Holder for 14 and 16mm spark plug sockets. Each is labeled. Makes a great gift.
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRob C
Tap Holder Holder
Holder for ¼" hex bit drive tap holders. I got them from Aliexpress for a couple bucks and they came in a little plastic baggie. As useful as they are, they deserve some method of keeping them organized
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRob C
Boring Bar Holder
This is a holder for a three piece set of boring bars (8mm, 10mm, 12mm) that I recently got from Amazon (but the same set is available almost everywhere) plus a pocket for a 16mm bar that I had before this.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRob C
Lead Bending Die
bending die for forming leads for crossover components prior to placing on a circuit board. gives a clean professional look to your boards when you have crips, regular bends.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRob C
PLANT TAGS
I've seen these before posted, but they weren't quite right for me. These are similar, but my own design, and they've been very useful in the garden so far. The spike is printed separately from the signs, I use 2 part epoxy to glue them…
- Pobrania
- 5
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRob C
tool holder for bakers racks
small hanging holder for small hand tools. specially made to hang on the side of baker's racking. Good for inspection mirrors and pointers too For printing, I suggest orienting it with the angled front face down I glued the hook to the…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRob C
Stubby Ratchet Holder
simple little holder for generic stubby ratchets. I got these from aliex, but you can get the same ones from temu, amazon, pretty much anywhere, many companies rebrand these same ratchets as well. Seats all three ratchets nicely, and…
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRob C
Holder for metric counterbores
a nice, compact holder for generic metric counterbores I recently got from Aliexp. Fit for 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, and 12mm counterbores with each pocket labeled.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRob C
Battery Rack for Milwaukee M18 Batteries
a modular rack for organizing your M18 (Milwaukee) batteries. Assemble with m4 screws and brass inserts in the SHELF parts. Large and small feet models are included to suit your shop space (I started with the big ones, but made the little…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRob C
T-Bar holder
compact holder for your t-bars. Helps you organize that mess you charitably call a toolbox.
- Pobrania
- 2
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.