Liczymy pasujące modele…
Here is a profile that I created from the version of the Prusa Mini, which I adapted a little for the Lerdge IX. For the moment, it only supports PLA and 2 print quality, 0.2 and 0.15 I will see to add PETG soon. Sorry, my screens are in…
Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…
The original one is very good, but I preferred to move it on a support more towards the back of the stand so that the millennium falcon is more centered, I find it prettier visually.
I simply reduced the sides so that it is 20mm in width to put it on a 2020 or 2040profile The t-nut 3mm: https://www.prusaprinters.org/fr/prints/62129-t-nut-m3-m4-m5/files
Il s'agit d'un remix de la version Prusa Mk3. J'utilise ce système sur mes Prusa et je n'ai pas trouvé d'équivalent pour la Genius, j'ai donc fait une adaptation ^^ Il s'agit de leds en 24V, branchées directement sur l'alimentation sur…
I recently acquired a Genius, and I was not a fan of the spool support, I use a model for my other printers that I adapt to the printers and that I find very good, useful, resistant and functional. With the genius' plastic mount, we find…
Il s'agit d'un remix de la version Prusa Mk3. J'utilise ce système sur mes Prusa et je n'ai pas trouvé d'équivalent pour la Sidewinder, j'ai donc fait une adaptation ^^ Il s'agit de leds en 24V, branchées directement sur l'alimentation…
John Wick silhouette with framework
This is a version with the text Game Boy in the lower left corner. I find it nice to add the name of the console in a corner if you print several (like me) I used the Nintendo font called "Pretendo", it's free on this site: HERE You need…
PRUSA MINI BEAR ________________________________ I am French, my English is very average, I did better, I apologize in advance for any translation errors. A French version of this tutorial exists here / Version française ici: HERE What's…
This is a version with the text “Nintendo Entertainment System” in the lower left corner. I find it nice to add the name of the console in a corner if you print several (like me) I used the Nintendo font called "Pretendo", it's free on…
Here is a led lighting system, in 24v for the Lerdge IX printer. You would need to buy: - A switch like this → HERE - A 24v led strip I added a switch on the side, in front of the printer and 24v led strips, this is powered directly, this…
Originally, the cable wanders under the bed and given the heat that the bed gives off, I didn't like it, so I created a kind of leg, a support that keeps the cable straight and a little more away from the bed, to avoid risks due to the…
This is the Roland Garros Logo with 2 color changes. Have fun !
Embout étroit pour aspirateur Hauteur 17 cm Diamètre intérieur 32mm Narrow end for vacuum cleaner Height 17 cm Inside diameter 32mm Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 or 0.25…
That of the remix is good, but the screws I use go through the holes and therefore do not press on the fan. I modified it to add a bottom to the original hole and for 3mm diameter screws. I add photos of the problem where we see the screw…
I changed the height of the button to fit a little better with the Lerdge IX printer
Luigi from Super Mario (HueForge) with blue color 150x240
I want to clarify that I am not the author of this, it is Tomson, whom I thank for giving me his permission to post it ! ________________________ These are wedge for the smooth rods of the X axis. The original smooth rods measure…
Originally, this plate is in smoked plexiglass, but I don't find it very aesthetic, so I made an identical plate that you can print and therefore take the color you want. Personally, I took the file and I reversed it, so that the printed…
This is a version with the text “Super Nintendo Entertainment System” in the lower left corner. I find it nice to add the name of the console in a corner if you print several (like me) I used the Nintendo font called "Pretendo", it's free…
The author specifies in his PDF file that he can provide you with a plate with the serial number on the side of the ARC. I find it very nice to personalize your ARC this way, I requested it, I printed it but when it was installed, I found…
Un simple support pour mettre des flyers au format A5
I think that with a frame, it finishes Mario's portrait very well! You'll just need a dab of glue to hold it in the frame. → The portrait is available in the remix link below.
Brick separator tool without the cross
It's the same except I doubled the layers. The original one seems too thin to me. Layer: 0.2mm Nozzle: 0.4mm Top fill pattern: Hilbert Curve Print time: 3h21 Color 1: Yellow Color 2: White Color 3: Kheki or Grey etc Color 4: Red Color 5:…
A stand to display 5 keychain NES cartridges I recently bought the NES keychain and wanted to display them vertically so I made a little stand. To buy the NES cartridge keychain:…
A support to hold your NES cartridges upright. I recently bought the NES keychain and wanted to display them vertically so I made a little support. To buy the NES cartridge keychain: →…
Here is a frame for the portrait of John Wick present here: https://makerworld.com/en/models/431115#profileId-335628
The screen is supplied with a button, but the screen is 3.5 inches and it is touch sensitive, I find that the button is useless, I never use it! So I removed it by desoldering the button and redoing a panel without the button hole.…
Here is a cover for the USB of the PS5 (old version, big version) with the PS5 logo
Here is a cover for the USB of the PS5 (old version, big version) with the PS5 logo
Je suis un fan de la page Facebook de Planète Star Wars et comme j'adore leur logo, j'ai décidé de travailler dessus pour en faire un petit print ! Page Facebook: https://www.facebook.com/fanclub.planete.starwars Site web :…
Here is a cover for the USB of the PS5 (old version, big version) with the PS5 logo
Here is a cover for the USB-C of the PS5 (old version, big version) with the PS5 logo
Here is the French version of the stand for the Speed Champions (77256): Back to the Future DeLorean model. You will find the pillar and support on the original topic here: HERE ! If you don't have the bricks to attach the figures, here's…
Il s'agit d'une cale pour centrer la courroie de l'axe X J'ai ajouté un petit logo CR10S au dessous pour un le fun ^-^ This is a slipway to center the X-axis belt. I added a small CR10S logo underneath for a fun ^-^ Print Settings Printer…
Smooth version 5 colors ! I'm a fan of the Planet Star Wars Facebook page and as I love their logo, I decided to work on it to make a little print! Facebook page: https://www.facebook.com/fanclub.planete.starwars Website:…
I printed the 200x200mm frames with rounded corners, but when you place them side by side on a wall with a light background, you can see the light color of the wall in the corners of the four frames. So I created a small cap so that the…
The frame is HERE ! This is a small fixing that uses the slot in the 200x200mm frame to securely fix it to the wall.
To wszystkie aktualnie dostępne wyniki.
