Liczymy pasujące modele…
Multiboard and Honeycomb Storage Wall holder for tape measures with a belt clip. Print upright without supports. Updates 23 Apr 2023: Added version B with unneeded material removed. Just choose whichever looks better to you. 03 May 2025:…
Combines a countersunk insert (to screw to the wall) and empty insert (to attach stuff) into one, so you don't waste space. Remixed from roryshko's model: Used the stepped hole trick so it can be printed without supports Added 2x and 4x…
Screwdriver holder for HSW (Honeycomb Storage Wall). Remixed to use the small hexagon inserts, which are easier to remove/relocate. Thanks to @CarbonProp_540499 for the excellent original design. Allows you to easily pull out/insert the…
The “flame” is hollow with thin walls, so the center LED can shine through. Print with transparent material for an even better effect. Print settings Supports touching buildplate (only needed for the base) Use support blocker to avoid…
HSW mount for adjustable crescent wrench. There are other models out there ( like this one ), but they (a) print with the vanes standing vertically which makes them weak, and (b) use a screw, leaving the model free to rotate when mounted.…
Combination square holder for Honeycomb Storage Wall and Multiboard. Print upright without supports. Just mirror it in your slicer if you want the ruler part to hang on the other side.
Crimper holder for Honeycomb Storage Wall and Multiboard. Should work with IWISS SN-28B, SN-48B, or similar crimpers. I wanted a mount that held the crimper while open, to avoid having to close it every time. Settings Print upright…
You can: Store just the battery Store battery and charger while charging Store just the charger when battery is in use (see images) Battery model LBXR20, charger model LCS1620B. Check images to make sure yours look the same. Updates…
Forked from https://www.printables.com/model/149491-cpap-hook Added screw hole. Prints on its side with no support. Works with ResMed heated tubing.
Wall mount for Steam Deck. Can be mounted directly to the wall, or to HSW (Honeycomb Storage Wall). There's also a file for the logo insert, which you can print in a different color and glue onto the recessed logo. Mount directly to wall…
This is the drill model I designed it for. I can't guarantee it'll work with other models, but I've included the step file for easy modification. Mount directly to wall Just use the HSW version two screws Mount to HSW Use two M3 inserts…
Remixed to move the insertion slot to the front to prevent filament popping out during prints. UPDATES 14 Mar 2023: Made the slot v-shaped and also diagonal to make it harder for the filament to pop out
Print without supports. Fits Wiha 40010 magnetizer, and others as long as they've got a 2 cm wide gap. Updates 2025-07-17: Added Multiboard version
Honeycomb Storage Wall holder for KAIWEETS KM601 multimeter (also branded as AstroAI MUS10KRD). Holder Print upside down as in the file Supports touching buildplate Cable wrap Print two Standing upright No supports needed Enable brim if…
You can use all 3, or just the two on the right also work great. There are clip-on versions which don't require disassembling the bed, and also regular through-hole versions. Parametric version The design is parametric, so you can adjust…
EBB36/SHT36 mount for Orbiter v2. Remix changes: Moved the strain relief so it can be used if running over USB instead of CAN. Made it longer to accommodate reinforced USB plugs. Replaced nut holes with heatset insert holes (use M3 x 5mm…
These are hangers for the modular tape storage system. You still need to download the rest of the components from there. I wanted some custom sizes so I remade the hangers in OnShape. I've uploaded a couple samples, but what you want to…
DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…
The walls are thin enough that the inner LED bleeds through, creating a nice effect. You could print in darker colors or adjust the brightness to vary the glow. Print settings Supports touching buildplate (only needed for the base) Needs…
Required hardware 2x M4 screws, 16 mm or longer (optional) 2x M4 heatset inserts, only needed for the heatset inserts version Print Settings No supports Step 1 Remove the screen and disconnect the cable. Unscrew the two little mounts that…
Update : Added single-piece snaps Models using a single Multiconnect attachment point can spin freely, which is very annoying. These remixed snaps prevent that. The following variants are available: Single-piece: Lite Lite directional…
openGrid tiles in the shape of isosceles triangles, each with the following variants: Lite and full thickness. No holes, straight holes, and M6 printed threads. Chamfered or not. Chamfered versions enable additional holes along the…
Remixed the base to stand on its own. In case you want to have the filter standing in the enclosure instead of mounting it to your printer's frame. As with the original base, you need 2x M3 heatset inserts to mount the filter to the base.…
Updates: 2023-10-16: Added pre-generated adapters for most commonly used offsets (small mounts) 2023-10-22: Added adapters for big honeycomb mounts Introduction These adapters let you mount individual HSW accessories directly to Qube 500,…
This is for the boards with a voltage readout (see images). Adding a fan will allow you to use the buck converter under heavier sustained loads. You will need: 3010 axial fan M2/M3 screws Optional: M3x5x4 (Voron standard) heatset inserts…
Wall mount for the Keychron K8 keyboard. Mount directly to the wall or to HSW (Honeycomb Storage Wall). To mount to HSW, you need M3 inserts. May also work with other keyboards with similar dimensions. Print settings Print lying on its…
Protectors/covers for type A (2-prong) and type B (3-prong) plugs. Tested with PLA and 0.8mm nozzle. But should work with smaller nozzles and PETG too. Use random seam alignment. Don't use silk or matte PLA because it has poor layer…
This is for the Fast operation vise . I added a hex head to the long version of the handle so it can be driven by a drill or an electric screwdriver using a 10 mm (3/8 inch in dodo units) hex socket. Only uses a few extra grams of…
HSW mount for FOLAI stud finder. May also work with other rebrands. Check if yours looks like the one in the pics. Goes on upside down and with the back facing out (check pics). Print settings No supports. Enable brim if needed.
Use two screws to either attach directly to wall, or to HSW using M3 inserts. The palm rest is like a wedge. You must slide it in with the thick end down . It goes behind the keyboard. Print with supports touching buildplate .
What you will need Transparent/translucent filament Water Food coloring How to use Print the main model and the adapter for the fan type you want to test. (There's only a 5015 adapter right now, I'll add 4010 and 4020 soon) Fill partially…
This is just an experiment for now. These are Gridfinity-compatible 42mm pitch plates based on openGrid Lite and use the snap mechanism to hold the bins. The plates are backwards compatible with original Gridfinity bins, but these bins…
Allows you to easily switch guards with one hand, when your other hand is not free. Designed for Philips Multigroom guards. There's a slight learning curve, but it's easy after you do it a couple times. To detach a guard, slide it down…
To wszystkie aktualnie dostępne wyniki.
![[Experiment] oGFinity](https://media.printables.com/media/prints/6df972cf-23e9-4ff9-839d-221b7e355286/images/10987463_7efef63f-fd8e-49ff-9de7-936c7291c2ee_e3335f1f-6497-4c2e-9603-d645046df005/20251024_030232.jpg)
