Liczymy pasujące modele…
I made this to hold various things, including pens and pencils. It mounts via openConnect to an openGrid system. I've included some attachments for mounting but any of the openConnect mounting files should work.
This holds a tape measure to openGrid using openConnect. You can use any of the openConnect snaps but I've included the screw in type here. You need 2x snaps to connect to openGrid.
This connects to openGrid using openConnect. I've included one attachment type but any of the openConnect snaps should work. I printed the holder as it would appear on the wall with supports.
So I've included the snap to connect to openGrid, if you want to use Multiboard, you'll need to get the Drop In Nut Snap and print 2x of them. Otherwise, print 2x of the included openGrid M4 Nut Directional Snap. You'll also need 2x m4…
This was inspired by (but not remixed from) There is about 29mm between the two posts and my Knipex Cobra Pliers 87 02 250 fit perfectly. It should also fit the 87 01 250 pliers as well. Connects to openGrid using the openConnect snap…
This is a holder for my vallejo and army painter paints. The paint dropper diamater should be about 26mm to fit. This should print without supports but I've been printing with a brim because my slicer adds it and I feel like it doesn't…
I found one spray bottle holder but the license didn't allow remixing so I ended up designing my own. It's 28mm wide to perfectly fit within an openGrid space and uses openConnect for mounting. Just print 2x openConnect mount points (I've…
This is a remix of an existing multiboard underware project to instead mount using openConnect to openGrid/underware. I've included mounts for the Lite version (which is what I use) but you could easily mount to the full version. I've…
I've included 2 different snaps, one for openGrid lite and the other for regular openGrid. You only need to print one of them two times.
Made a USB holder to connect to openGrid. This should be printable as one piece with no supports.
I have a bunch of Altoid Tins kicking around and I thought it would be good to get them up on my wall and off my desk. I made this to hold 4x Tins on an openGrid wall using openConnect. Just print at least 2x of the snaps, 4x if you want…
This just holds a spool. It has bearings so depending how how it's mounted and how it feeds, it should be able to feed into a printer as well. I've included one set of openConnect snaps but any should work.
This uses the locking version of https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system to attach BSI glue and activator to openGrid. The glue holder is a little big (as can be seen in the picture) because it…
I got a Canon Selphy cp1500 and this frame should hold the 4x6 paper for that printer. It connects to openGrid using the openConnect system. There's only 1 attachment point per orientation.
I changed the original model's holder to connect to openGrid using openConnect. I did not include the mixing tray so you'll need to go grab that from the original model. I did include an openConnect snap so you can attach this to openGrid…
Phomemo D30 holder for openGrid. Attached with a openConnect connector. Print the D30 holder (I printed it vertically with supports at the bottom) and one set of the openConnect snaps. You can use other snaps, I've just included one set…
This holds the 3oz Noodler's Ink bottles from https://noodlersink.com/ and connects them to openGrid using openConnect. Should be able to print with no supports. You can use any of the openConnect attatchments, I've included one so you…
These are the test tubes I have: https://www.amazon.com/dp/B06XFSSNH6 These are simple mounts to connect them to openGrid. It's currently one test tube per holder. They are too wide to do one test tube per grid.
Holds a Bic lighter to openGrid.
These hold the Simple Human size J trash bags to an openGrid wall. I made one for the back side of my under sink cabinet. Connects via openConnect. I've included one type of snap but any of the openConnect snaps should work. Just print 4x…
If using openGrid, print 2x of the openConnect snaps. (Doesn't have to be the ones included, any of the openConnect snaps should work) If using DDD Wall Control, print 4 of the pins and 1 of everything else. The iFJF protractor is a…
Holds Lutron Caseta Pro to openGrid using openConnect. I've included full and lite connectors but you only need one. You could also use any of the other openConnect holders.
Relay G10 holder for openConnect. Just print one of the snaps and connect to openGrid using https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system
This holds the SteelSeries Arctis 9 wireless transmitter to an openGrid wall using openConnect. I've included one openConnect holder but you can use any of them.
I printed the larger piece with supports because I wasn't sure about printing the openConnect connector flat like that. The smaller piece I printed without supports, the flat side down. You'll probably need to flip things around but this…
This is for https://www.amazon.com/Wiha-Zai-Haus-cacciavite-applicazioni/dp/B09411BWRV and I've included both openGrid attachments using openConnect and a Wall Control version. For the Wall Control version, print 4x of the Pins, one each…
This holds the case for https://www.amazon.com/dp/B00INL0BTS?th=1 to openGrid using openConnect holders.
To wszystkie aktualnie dostępne wyniki.
