Liczymy pasujące modele…
Remix from DeadTr33_2 and arek_r1 I added one more nose to bedstart and remixed bedend for KP3S Pro All printed in PETG. KP3S: needs 10 bases and latches. KP3S Pro: needs 12 bases and latches. TheStart and -End Connectors will need some…
Simple mount for Nameless RC Naked 9 / 10 / 11 for common GoPro mount and iFlight mount. I design with wireslot for betaFPV bt2.0 connector. Secure with the long m2 screw comming with the NLRC kit. Category: 3D Printing
TBS ND Filter Mount for Nameless RC Naked GoPro Hero 9 10 Case Category: 3D Printing
Case for 8x TBS ND Filters and Micro SD Cards. Printed in PLA Carbon and TPU (0.6nozzle 0.3 layerheight) 3x M3x30mm screws needed TPU settings: 2-4 walls, no Infill PLA/PETG settings: 3-4 Walls 20% infill Rugged Box from Remix…
rear mount for finder https://de.banggood.com/Finder-YR50B-Super-Loud-Buzzer-100dB-Dual-LED-for-FPV-Racing-RC-Drone-p-1585819.html?cur_warehouse=CN&rmmds=search Category: 3D Printing
print in TPU if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv https://www.youtube.com/channel/UC0Ps_VxWIuz_74Qz01wQ68w Category: 3D Printing
This a Frame/Stand/Mount for a 3.5inch Waveshare GPIO Screen on PiZero 2 which can be clipped directly in the original LCD place or used as serperate stand. The Pi is powered from LM2596S stepdown converter placed on PSU. You need 3x M3x6…
Remixed the mount for a smaller GPS Category: 3D Printing
print in tpu or petg - no support needed Category: 3D Printing
print in TPU Category: 3D Printing
printed with filamentum TPU Category: 3D Printing
Mount for iFlight GP8 Category: 3D Printing
I did not found any solution for vertical mount this case. so i decided to rebuild it complete from sketch. i also aligned the brackets with lens center. you can use all iflight hardware (bec and screws) also original flight tpu…
RX mount to place diveristy behind fpv cam Category: 3D Printing
Here is my recent klipperconfig for KPS3S PRO on fluidd .. with 3dtouch probe Cura Startcode: START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0} Cura Endcode END_PRINT Link for…
Screencase https://www.thingiverse.com/thing:2776109 or https://www.thingiverse.com/thing:1229473 Category: 3D Printing
Little backpack for impulse-rc apex for crossfire gps and caddx vista antenna no support needed tpu 100% infill if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
Designed a cases for standalone Caddx Vista Nebula Pro to mount on my rc-car. Same size like GoPro Session 5. Printed in TPU 98A.
Remix from https://www.thingiverse.com/thing:4109855 I like to use a shorter knob Category: 3D Printing
sleeve for nlcr naked gp10 gp11 Category: 3D Printing
LOWER SPRING HOLDER FOR WLTOYS 144001 Category: R/C Vehicles
i build some parts for my 3.5 build using roma l4 frame. added some 23mm standoffs to mount the o3 cam. happymodel elrs diversity and cap mount included. mount for flywoo nano m10 gps. and iflight naked gopro Category: 3D Printing
I love the SL5 frame and this a nice way to fit the airunit into the small frame. I remixed the design a butchered a nother antennamount and crossfire aswell. Category: 3D Printing
printed with soft eSun TPU Category: 3D Printing
quick remix for iflight naked gopro .. printed in TPU no support needed if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv https://www.youtube.com/channel/UC0Ps_VxWIuz_74Qz01wQ68w Category: 3D Printing
iflight GPS and Finder Mount ( Backpack-Sandwitch) for Diatone L5 Longrange ... may also fit F4 and LR4 but not testet. also TBS M8Q GPS should fit Category: 3D Printing
compact backpack for m8q gps (iflight or matek) and vista antenna Category: 3D Printing
Butchered GP Mount for most iFlight 5inch 25deg Category: 3D Printing
Mount for great probe and great shrouddesign by @ThrocheHole https://de.aliexpress.com/item/1005002946647165.html Category: 3D Printing
Adjustable Mount for GoPro Mini 11 on FR7. (15° - 35° Tilt). Category: 3D Printing
3.5'' Klipperscreen Frame for Artillery Genius This a Frame for a 3.5inch Waveshare GPIO Screen on PiZero 2W which can be mounted directly in the original LCD place. The Pi is wired internal with LM2596S stepdownconverter. Category: 3D…
To stack my WD elements harddrive i designed this simple loop. Printed with TPU with different heights. Every height between 1-2cm works fine. Category: 3D Printing
This is a remix from my NLRC GP10 Sleeve ( https://www.thingiverse.com/thing:5351108 ) with fixed TBS ND Filter mount. I also flipped the horizontal view upside down and modified the SD Card entry. Printed with filamentum TPU 98A (hard)…
Remixed Conversion Kit Parts for Mobula 7 Parts with Naked Vista. Original Files from Dax Neal, nxp200 and PachRay.
beep beep Category: 3D Printing
If you like this give me a sub on IG or Youtube https://www.instagram.com/martymcfly_fpv https://www.youtube.com/channel/UC0Ps_VxWIuz_74Qz01wQ68w?sub_confirmation=1 Works with most sessionmounts. I use it with apex session couch…
other side has to be mirrored in slicer for clean nanoRX installation i recommend this print https://www.thingiverse.com/thing:4731250 if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
edit: added v2 with closed holder. open version had issues with light reflections. printed with 3d warhorse tpu if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
Third person view arm for impulserc Apex and Insta360Go combined with this cammount https://www.thingiverse.com/thing:4290123 mount printed in TPU and arm printed in PETG or PLA https://www.instagram.com/p/CL2Z5HJK-7_/ first test (very…
I build some tpuparts for this cheap but pretty nice chinewhoopframe. https://de.banggood.com/Hornet-115m-Wheelbase-2_5-Inch-Black-or-Red-Frame-Kit-With-Camera-Mount-for-Whoop-or-Cinewhoop-RC-Drone-FPV-Racing-p-1744777.html crossfire…
Print in TPU with support on side. Works with most sessionmounts. I use it with apex session couch https://www.thingiverse.com/thing:3864181 if you like this give me a sub on IG or YT https://www.instagram.com/martymcfly_fpv…
Here is my recent klipperconfig for KPS3s on fluidd .. with 3dtouch probe Cura Startcode: START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0} Cura Endcode END_PRINT Link for…
Simplified Cam mount for naked GP and vistacam vor Beta FPV v2 95x pusher (damper removed) printed in PETG touchplate support (insta360 tpu mount https://www.thingiverse.com/thing:4290123 ) Category: 3D Printing
butchered mount for caddx antenna Print Settings Printer: Artillery Genius Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: 3D Warhorse TPU Black Category: 3D Printing
printed in tpu 0.32 layerheight .. lay on side... rear is mounted with ziptie for any kinds of gopro... i use it without battery powered by iflight balancer cable. 1405 4800kv t-motor and gemfan d63 .. works flawless angle 15° if you like…
GoPro Mount for Strapmounting Category: 3D Printing
To wszystkie aktualnie dostępne wyniki.
