P
PrintablesOvland3D
Shoehorn holder
20% fill PETG clear M3 double-sided tape on the back
- Pobrania
- 223
- Polubienia
- 8
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesOvland3D
Ender 5 Plus heating bed cable holder
This prevents the cable from lying on the floor and rubbing into other cables or the wall. The original connector is clipped on without ziptie (max 5mm width), ziptie can be used if desired. It is mounted with 2 pcs m5x12 and Nut m5T…
- Pobrania
- 147
- Polubienia
- 31
- Ocena
- 0
P
PrintablesOvland3D
Hygrometer and Temp Holder
This is a holder for easy access when changing the battery or placing it in another container. the frame is attached with double-sided tape Hygrometer model:KTT-TS8045ST-11D I use 9mm 3m VHB double-sided tape
- Pobrania
- 134
- Polubienia
- 21
- Ocena
- 5
P
PrintablesOvland3D
Coffee filter box/ Kaffe filter boks Nr.4
mine is printed on an Ender 5 plus with 0.6 nozzle, layer height 0.28, 100% infill. in PLA gray from Clas Ohlson :)
- Pobrania
- 123
- Polubienia
- 18
- Ocena
- 0
P
PrintablesOvland3D
IKEA Drybox Remix + Rewind
I have made some changes so that I can print it on my printer. Split the floor into 2 parts and made a few more changes when it comes to rewinding the filament roll. made so that the moisture meter fits better. And made more room for…
- Pobrania
- 92
- Polubienia
- 32
- Ocena
- 5
P
PrintablesOvland3D
Skadis USB cabel holders
for skadis board system. Intended for and holding Usb cables and other cables. The Holders is printed on an Ender 5 plus and can hold from 5pcs to 17pcs, nozzle 0.4, layer height 0.2, 20% infill, with supports. The Hooks is printed on an…
- Pobrania
- 91
- Polubienia
- 8
- Ocena
- 0
P
PrintablesOvland3D
Shoe horn Holder
with screws or double-sided tape Used PLA 20%fill
- Pobrania
- 87
- Polubienia
- 2
- Ocena
- 5
P
PrintablesOvland3D
Filament Run Out Sensor Mounting Ender3-S1 V1
this is for those who want the Filament in its own box to keep it dry and free of dust, above the Printer on its own shelf. I have use a m3 screw white a nut inside the Mounting. 100% fill, 1.75mm PETG Black and if you want one with the…
- Pobrania
- 70
- Polubienia
- 14
- Ocena
- 5
P
PrintablesOvland3D
Filament Run-Out Sensor mounting Ender3-S1 V2
this is for those who want the Filament in its own box to keep it dry and free of dust, above the Printer on its own shelf. I have used a m3 brass thread insert inside the Mounting. 40% fill, 1.75mm PETG Black and if you want one with the…
- Pobrania
- 66
- Polubienia
- 9
- Ocena
- 5
P
PrintablesOvland3D
Ender 5 Plus Hotend Support Cable Holder and dual gear extruder and filament guide
I have made this in PETG white, 0.16mm-40% fill with support. part 2 made in 0.12mm-40 fill, is attached with 2 pcs M3x16 or 12mm, 4mm pneumatic Fitting 1/4, 1.25 threads. The product is easily clamped over the step motor. Parts can be…
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
PrintablesOvland3D
Led List Holder for Ender3-S1
I have used PETG 1.75 Black. 20% fil 0.2mm. this is for Anslut Led Strip Item No.: 019945 Model No.:107265 don't need no tools after production, just clip on the frame
- Pobrania
- 46
- Polubienia
- 7
- Ocena
- 0
P
PrintablesOvland3D
O3D for HeroMe BLTouch Right straight out Mount
For the HeroMe Gen7 concept and fits the Probes Wings..
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOvland3D
Frigerator shelf for Bauknecht
This is printed on an Ender 5 plus, standing at an angle. I have attached two files, one with support and one without. I made it in ABS If you make it with support, I recommend cutting it off, not breaking it. 2 layers. 0.2 layer height.…
- Pobrania
- 35
- Polubienia
- 10
- Ocena
- 0
P
PrintablesOvland3D
Ender 5 Plus Hotend cable holder X axis on side.
These are made in PETG white, 0.20mm fill 20% and whit support. Part 1 is for cables upwards. Part 2 is for cables straight out to the side. the products can be changed on Onshape.com Part 1. Onshape Part 2. Onshape
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 5
P
PrintablesOvland3D
Filament rewind box kit
Do not open the filament box to reinsert the filament. this set up I have made a gearbox on the side so you can rewind the filament again without removing the lid. have linked the rollers together with O-rings so they work together. see…
- Pobrania
- 31
- Polubienia
- 10
- Ocena
- 5
P
PrintablesOvland3D
Marshmallow holder
this is designed to hold 45 marshmallows on a stick. so that the children can easily take one. they come with garnish. I made this in PLA, 15% fill size 150x150x60mm hole 6.4mm
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesOvland3D
AA battery holder with drawer, space for 56 pcs
here you can take out 4 batteries at the same time or just one at a time, the tray is filled up simply by pushing it back in. Short video:
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 5
P
PrintablesOvland3D
Q-Tip boks
printed white 0.4 nozzle, layer height 0.2 PLA 10% infill used m3 screw for the nobb
- Pobrania
- 22
- Polubienia
- 6
- Ocena
- 5
P
PrintablesOvland3D
TFT 70 V3 Mountingbox
I have made it with 4 walls to have enough material around the holes so that I can make holes bigger for insert threaded inserts. if desired.. otherwise it is 0.2 layer height and 10% infill. optional what you want to make it in I have…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOvland3D
Downlight Hood
This is made with PLA 20% fill and with support and upside down. This fits Namron Alfa Reflector warmdim art no: 3234654 can use petg. but the best is self-extinguishing plastic. :)
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOvland3D
AAA battery holder with drawer, space for 80 pcs
here you can take out 4 batteries at the same time or just one at a time, the tray is filled up simply by pushing it back in. short video:
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 5
P
PrintablesOvland3D
Holder for magnifying lamp head.
Holder for magnifying lamp head. Model no: 425-040 from Anslut printed with Petg white, 100%Fill
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOvland3D
Box for 20cm hot pot base, space for 5 pcs. Gryte underlag 20cm plass til 5stk.
Printed in PLA with 0.6 nozzle, 0.28 layer height, no supports required.
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesOvland3D
Flexit vacuum cleaner bag holder
I have printed this in PLA with 0.6 nozzle, 0.28 layer height and 100% infill. this fits several types of bags.. helps to keep the bags in order so they don't get thrown around the room somewhere. PS my photo shows one that is lower. it's…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOvland3D
Toothpick stand
Toothpick stand is made in PLA, 20% infill I used support, 0.4 nozzle.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOvland3D
Lenco PA-260 Front Leg
I printed in PLA 20% fill, 6 layer walls and 12 layer top.
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.