Liczymy pasujące modele…
For my Gridfinity storage I needed bins without the lables and the rounded inside. So here are some in sizes from 1x1 to 3x3 In different heights. The name of the objects are the dimensions, for x and y and the height. According to Zack…
More boxes for the Gridfinity storage system without the lables and the rounded inside. these are bigger sized boxes with dimensions from 4x1 to 5x5 in four different heights. The name of the objects are the dimensions, for x and y and…
If there is a need for bigger Gridfinity bins, here are the expandable bins you can print in almost any size, the minimum width is 1 and maximum is 4. There are End- and Mid-Sections that will connected via dovetail connectors. With…
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
multicolor print of the Idefix modell from NachoRoPe for the Prusa XL. The base of the model has been flattened somewhat. I used Prusaslicer Version 2.7.2 for coloring and printing, as the time of upload it was the RC1. It works nearly…
multicolor print of the Woodstock modell from Misterdid for the Prusa XL. I strengthened the legs a bit. I used Prusaslicer Version 2.7.2 for coloring and printing, as the time of upload it was the RC1. It works nearly flawless. Before…
Storagebox for bottles of super glue, diameter of the holes is 31mm. There is a box for one bottle, or you can have a box for three of the bottles. The box for three bottles have two extra holes for needles that I always need to push the…
Alignment tool for K40 mirror No need more for putting tape over the mirror and risking getting the mirror dirty. You can fire a couple of pulses, simply move the strip over a little bit to get a fresh piece of paper. Three versions:…
Gridfinity holder for AMB-/KRESS collet with attached clamp nut. Designed for my Mafell 1000FM, which uses the Kress collet. Don’t know if it will fit for ER16 collets, but dimensions are given, holes are 24mm and 13mm in diameter and…
K40 exhaust adapter for K40 laser with the 90mm fan to connect the original blue hose. Printed angled on the print bed to reduce supports. If there is a need for other hose diameter, let me know. - - - - Winkelanschluss für den K40 Laser…
Exhaust port for K40 Laser with the 90mm fan to remove the ridiculous blue metall one. Simply remove all the screws from the backside and undo the four screws on the fan so they are flush with the inside. The screws go direct into the…
Inlay for screw measuring tool https://www.printables.com/de/model/32160-screw-measuring-tool-m2-m10-4-120mm Fits into the slot for the length indicator for better visibility and less dirt inside the slots. The thickness should be 0,4mm,…
This is a gridfinty box for the great torque wrench. https://www.printables.com/de/model/24539-torque-wrench-handles-from-10nm-up-to-30nm There is also room for a 7mm socket and its holder that I use for my nozzle change. The torque…
Mount for a Sorotec tool length sensor with a diameter of 34mm. Halter für einen Werkzeuglängensensor der Firma Sorotec mit einem Durchmesser von 34mm. https://www.sorotec.de/shop/Werkzeuglaengensensor-Sorotec-8mm.html Dient nur zur…
Drill guide vor drilling 8mm holes into the wasteboard of my MPCNC. To protect the guide from the drillbit, alu tubes with inner diameter of 8mm and 1mm thickness are inserted into the guide. Two 8mm bolts are inserted in already drilled…
Spacer for a saw blade laser table parts needed: M5 threaded rod 4*M5 nuts cheapest saw blades you can get (for my bed 24 pieces) 46 spacer Rebore the holes in the saw blades to 5mm, put them on threaded rods, place spacer between the saw…
To wszystkie aktualnie dostępne wyniki.
