Liczymy pasujące modele…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Sizes (Diameter x Height): 30 x 25 mm 30 x 35 mm 30 x 50 mm 42 x 35 mm (2 mm and 3 mm thread) 42 x 50 mm (2 mm and 3 mm thread) 42 x 65 mm (2 mm and 3 mm thread) 66 x 50 mm 66 x 65 mm 66 x 80 mm Printing Parameters: Resolution: 0.2 mm…
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: part 1/2 and cutter: 4 part 3/4: 10 part 5/6: 15 Supports: only part 5/6 overhang Assembly: Fix hinge parts with superglue (e.g. Cyanoacrylate) First add parts 5 and 6 to…
Most minimized and functional USB Cable Organizer ever Printing parameters: 0.2 mm resolution, 3 perimeters, no supports. Common cable diameter is 3.50 mm. Gcode contains one piece of each size.
Shaker Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm Grids: small, medium, large, open closed, small, medium, open closed, medium, large, open Lids: plain “S” for salt “P” for pepper “C” for chili, curry “O” for oregano…
Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm O-rings: Printed O-ring with FLEX O-ring 34 x 2 mm Printing Parameters: Resolution: 0.2 mm (O-ring 0.1 mm) Perimeters: 4 Infill: 15 % Supports: no Seam Position: rear Tips and…
Printing Parameters Roller Cutter: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: Organic, only on the headbed To avoid supports on the threads, add a cylindrical cap (0.2mm) at the bottom during printing and remove…
21 different storage boxes for IKEA Skadis: 1 case, 160 x 40, 160 x 60, 160 x 80 mm, height: 20 mm 2 cases, 80 x 40 mm, heights: 20, 40, 60 and 80 mm 3 cases, 120 x 40 mm, heights: 20, 40, 60 and 80 mm 4 cases, 160 x 40 mm, heights: 20,…
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no For two colors add a color change Calibrated with my favorite pasta Barilla Spaghetti no 5 (also works for all other spaghetti).
Sizes: Small: 55 mm Medium: 62.5 mm Large: 70 mm Printing Parameters: Resolution: 0.2 mm No supports needed Only cut off the two struts Related Models: Skadis Storage Box Skadis Sanding Block Holder Skadis Basic Hooks Skadis Grinder Holder
Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…
Printing Parameters Roller Cutter: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: Organic, only on the headbed To avoid supports on the threads, add a cylindrical cap (0.2mm) at the bottom during printing and remove…
Printing parameters: Resolution: 0.2 mm Supports: no
Cable Clips in different sizes: 1 x 3 mm 1 x 4 mm 2 x 4 mm 1 x 6 mm 2 x 6 mm 1 x 8 mm Printing Parameter: Material: PETG Resolution: 0.2 mm Perimeters: 3
Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Seam Position: rear Tips and Tricks: Cut off the thin struts to insert the belt Add a tiny amount of lubricant to threads (e.g. Vaseline or olive oil) Related…
ATTENTION: Strictly avoid short circuit and wrong polarity !!! Part list: DIY powerbank modul 2.4A (e.g. from ebay) 4 Samsung INR21700-50E (21700, 5000 mAh) 4 hex screws M3 x 6 4 insert nuts M3 x D4 x L5 1 m flexible cable 0,75 - 1 mm² 2…
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 4 Supports: yes
Akku Size (Diameter x Height): 18 x 65 mm (18650) 18 x 70 mm (18650, IC protected) 21 x 70 mm (21700) 21 x 75 mm (21700, IC protected) Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Seam Position: rear…
IKEA Skadis Holder for Sanding Block 93x115, 115x140 Printing Parameters: Resolution: 0.2 mm No supports needed Only cut off the two struts Related Models: Skadis Storage Box Skadis Spray Can Holder Skadis Basic Hooks Skadis Grinder Holder
Printing Parameters: Resolution: 0.2mm Supports: yes
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Supports: Organic
Printing Parameters: Resolution: 0.2 mm Perimeters: 3 No supports needed Only cut off the four struts Related Models: Skadis Storage Box Skadis Spray Can Holder Skadis Basic Hooks Skadis Grinder Holder
Printing Parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
Printing parameter: Resolution: 0.2 mm Infill: 15 % Supports: no Color changes: Start with red Change to white at 1.2 mm Change to red at 3.2 mm
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Infill: 40 % Supports: no Assembly: 1 hex screw M6x40 1 nut M6
Print it with 6 perimeters and 50 % infill.
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no Parts: 16 mm aluminum pipes: 320, 309, 292, 277, 261, 253, 240 and 226 mm 1 mm cord Glue for the ball
The ESP8266 (ESP-01) based download counter offers a web server to set the count. After plug in power supply, the device displays its IP address to open by a browser. The count input will displayed in two ranges (0 to 99999999 and 100.000…
115 phone sizes supported: Height: 8, 9, 10, 11, 12 mm Width: 69, 69.5, 70, 70.5, … , 79.5, 80 mm Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15 % Supports: no Assembly: For each connection print 2 hinges and use 4 hex…
WLAN Clock with ESP8266 D1 Mini and ST7789 TFT 240 x 240 Display. Wiring: ST7789 ESP8266 D1 Mini GPIO VCC 3V3 - GND GND - SCL D5 GPIO14 SDA D7 GPIO13 RES D2 GPIO4 DC D1 GPIO5 CS - - BLK 3V3 - Arduino Code: see ESP8266_ST7789_Clock.ino…
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Infill: 15 % Supports: yes Assembly: Use a M3x32 bolt and a M3 locknut
Printing parameters: Material: PLA Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no
To wszystkie aktualnie dostępne wyniki.
