Liczymy pasujące modele…
These are some wearable claws that fit perfectly on my little fingers. If you are an adult, I'd recommend scaling up to 125% which makes it heavier, but at least it fits. They take 30 grams and 1hr 30mins for a full set of both hands,…
Here is an easily wearable version of Turtle's Skyfire armband from the Wings of Fire series. IMPORTANT: This is meant to fit my wrist (I'm a small human), so scale up to your size using one of your bracelets for reference. Note before…
I tried my best to make a functional model of Onyx's Skyfire necklace from Wings of Fire book 6. Of course, it's not perfect, and requires quite a bit of supports. I designed two barely different versions of skyfire to put in the…
I designed this to look exactly like the enchanted bracelet Clearsight wore in Darkstalker. I printed it in black, causing it to lack proper coloring because I didn't have those colors. if you painted it, it would probably turn out fine.…
I modeled this after the necklace in Escaping Peril, and it has room inside to put a piece of scroll inside. Be careful assembling it, the hinge may break (print at 100%infill). Prints in two parts, and i recommend using a different color…
In an attempt to create my first dragon in blender, I ended up making almost this entire thing in tinkercad, even the scales. I hope you like the wings (but they require glue to go into the sockets) Both parts (wings and dragon) take 2…
Behold an infinitely extendable modular cuban chain link! Clone as many times as you want and print in various colors (no AMS required) I can't give print info for however many you'll make, but ten links weigh 11 grams and take 55 minutes…
This empty signet ring comes with two versions: One plain (that you can import into Tinkercad and add an initial or whatever), and one with a simple star design on it (looks better with one color change). You are allowed to sell whatever…
(About the ‘no supports’ thing, it printed once with no supports fine, then printed again with no supports messed up. Supports are easy to remove, if you choose the safe option) Includes three versions: short, medium, and long. They are…
An articulated RainWing from Wings of Fire. Looks best with multicolor underbelly and/or eyes. It takes 2hrs and 35 grams to print both parts of the dragon.
A spiky wristband for punk costumes or just wearing for fun. It includes a 1 piece version and a two plate no AMS version. It takes 50 minutes and 15 grams to print both parts, and needs supports for the bracelet.
This dragonfly wing style pendant looks nice when the wings and jewel is a different color, but must color change every colored layer. Please do not scale down, for the wings may break and a chain may not fit through the loop at the top.…
These are some curved horns that you can wear if you're cosplaying as a dragon or something like that. They are one piece and easy to print, they just need a few supports! I have added a model with RainWing Ruffs attached, too. Takes 2…
A suggestion by a makerworld follower, @Lionstorm : It contains two models, one with a wider hole and one smaller. They need supports and are similar size, so their print stats are very similar. They take 30 mins and 10 grams of filament…
Here is a very simple flexi snake, that has a working rattle. (Free to sell) First, print the model (of course). Once all supports are removed, insert the small ball into the lower tail compartment. Use a toothpick to distribute a small…
This is a simple ear hoop and ear clip that can be worn as is or customized. It weights less that a gram for one, and doesn't really have print info. Please share any pictures of custom earing you made! You are welcome to sell anything…
Here is a spiraling five- sided vase that can be used for flowers, decoration, perhaps even drinking out of :P The current size is very big, so I scaled it down to 50%. At that scale it takes 2 hours and 36g to print. it can be scaled…
This is a flexi Crystal Dragon from my upcoming book Dragon's Light. (This dragon is from book 2 actually but it's so fun and I had to flexi it!) Takes 17 grams and 1 hour to print. Made using Makerworld Flexi Toy Maker.
This is a free to sell Rubik's Cube bead (as per @ECatPrints 's request). It includes a 4x4 and 3x3 version. Unfortunately, it does not function like a Rubik's Cube, and cannot be disassembled. Each bead takes about 6 grams and 30 minutes…
Meet Kevin. He is a strange looking pufferfish with a fun fidget tail inspired by a fish I saw somewhere. Please do not scale down, because the tail may become fragile. He takes 10 grams and 40 minutes to print, but his tail and funky…
Like it's crystal counterpart , this is an old hair pin that I figured you all'd like. It takes about 40 minutes and 11 grams of filament to print. Good for large amounts of hair.
I made this articulating dragon based off of @Dimorphodon13's wings of fire dragon. The wings are moveable, but unfortunately the legs must be glued on to a peg going through the body until I can find a better way to articulate the legs.…
I absolutely love these earrings I modeled after Clearsight's. They slip on super easy, require only 2 color changes, and are very comfortable (but don't fall off). I'd use a translucent white or just plain white for the moonstone look,…
I've been waiting so long for a model of the amazing OIIAI cat, so I made it! (With the help of Image to 3d). Comment if you are a fan too! OIIAI Cat facts: Her name is Ethel She is a munchkin cat (with short legs) She is blind and…
A HiveWing stinger bracelet for cosplays. It is fitted for my wrists, and I recently discovered that I have really small wrists! You may have to scale it up if you are bigger. It takes 40 mins and 13 grams to print. Let me know if you…
This phone holder I made is convenient for kitchen recipes, phone calls, or just holding it. When you lift your phone off of it, you see a positive message engraved on the phone holder. I don't recommend scaling it down, because your…
These earrings are not from a specific part in the Wings of Fire story, I just decided to make them inspired by the Wings of Fire Skyfire rock. Just like Qibli's Earring, and Clearsight's Earrings, these slide on your ear easily and are…
I got a suggestion from a follower, so I made these wearable RainWing ruffs. They require no supports and take 2 hours, 35 grams to print. I suggest using paint by layer height in slicer to get a different colored ruffs. Enjoy!
A follower requested this on makerworld. It has easy assembly, but the joints can pop out if bent too far (but easily placed back). It weighs about 60 grams and takes about 3 hours to print (all pieces.)
Modeled after the gold SandWing scepter from The Brightest Night graphic novel. I didn't have any red filament for the ruby, but it looks good in most colors. The scepter pieces take 35 minutes, 13 grams and needs some supports. The gem…
This is Quilliam, and articulated quill dragon. He looks great in multicolor but required many color changes and waste for one-nozzle printers. He can stand up on his back legs, stand on all fours, and lay down. At his current size and…
Here is an easy to wear version of Foeslayer (or Hope)'s diamond protection earring from wings of fire. It weighs less than a gram and does need supports. I'd suggest translucent or white filament, but it looks good in any color.
This is Ruby/Tourmaline's enchanted earring from Wings of Fire. It is easy to wear and looks best in gold filament. It takes less than 20 minutes to print and two grams of filament for a pair.
I've finally decided to publish this hair pin I made a while ago in tinkercad. It comes with a longer and shorter hair “holder” depending on your hair amount. It takes 40 minutes and 11 grams to print both parts, but I recommend printing…
I made this standing cat figure that has a poseable tail and neck and moving legs. It comes with two tail selections (scared and normal) and the joints may be a little difficult to snap in. Modeled after my cute cat Morris, whose tail…
This is a Crystal Dragon made in tinkercad. He has articulating arms, too. The dragon takes 50 grams of filament and 3 hours to print. Scaling him down may cause joints to be fragile.
@YinFrederick_5320336 requested this, but I don't know what they expected. I just made a necklace with two wings and a barb, so here it is. I recommend using multicolor, and being very careful when removing wing supports. In single color…
A request from two followers: Sadly I could not create a way for it to roll up (hinges would be too thick), so I made this rolled up version. It's kind of heavy, weighing 50 grams and taking 3 hours to print all pieces, but is oddly…
Blob from Wings of Fire I couldn't get the “wood” textures on him so he is more like a regular octopus with articulated legs. Takes 20 grams and about 1hr 15 mins to print.
This is a bracelet from a book I'm writing. (I'll put a link to the book once it's published). There are three lengths, and if you don't fit them perfectly, always choose the smaller one, since you can always extend it with my modular…
Honestly I don't know what these are - I named them starstone (but that heavily relies on the filament color). Print em in gold and they're gold earrings! Do whatever you want! :P Takes 30 minutes and 4 grams to print, please show me what…
An attachable Qibli's Earring charm for a real hoop earring. It takes 13 minutes, and 1 gram to print (no supports)
A simple display for Darkstalker's scroll . Takes 11 grams and 45 minutes to print.
A follower suggested these simple armbands. The reference didn't have much detail so this is what I came up with. it includes a 1 peice version and two NO AMS parts. Separately, the no AMS pieces take 22 grams and 1hr 15 minutes to print.
You can show off your “strength” by “ripping apart” this mini magnetic book. Like my fridge magnet , this requires four 6x6x2 magnets that, very importantly, must be glued in facing the right way! Also make sure to hold onto them to they…
To wszystkie aktualnie dostępne wyniki.
