Liczymy pasujące modele…
The mounting holes for the BTT Pi 1.2 are measured directly from the STEP file in BTT's GitHub repository, as they differ slightly from a regular Raspberry Pi. To mount the boards, you will need: four M2.5x8 screws (or M2.5x4 when using…
The top/bottom layers are only 0.4mm thick, but the rigidity is not compromised thanks to the ribs. The whole thing can be assembled with four M2.5x8 screws. This model is designed to be printed with a 0.8mm wall thickness (0.4mm…
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
The bin should be printed in vase mode, with a wall thickness of 0.8mm . The bottom of the bin should be 1mm thick (e.g., 5x0.2mm or 4x0.25mm layers). The divider is 0.8mm thick, so should be printed with 4x0.2mm layers.
This model is inspired by the design from @Oleynick_266380 , but I use the V2.0r1's model as the base. Noticeably, the fan ducts are wider, allowing more airflow. You will need 3xM3 heat-set inserts (two on the top and one on the back).
There are three mounting options for the accelerometer: vertical, horizontal, and diagonal. Pick the best one for your needs, and install brass inserts accordingly. For all mounting options, the mounting holes are 15.5mm apart. So you can…
Material: PETG, ABS, or ASA Two parts need to be printed: Pegs facing upwards Pegs facing upwards, mirrored along the Y axis No support required 0.20mm layer height You should be able to reuse the original 4 screws to assemble them. The…
To assemble the case, you will need: Four M2.5x10 standoffs Four or eight M2.5x6 screws (optional) Four 1.6mm spacers between the CM4 and the router board Print settings: Material: PETG Layer height: 0.2mm Walls loops: 3 Top/bottom…
To wszystkie aktualnie dostępne wyniki.
