Liczymy pasujące modele…
1 x 45 degrees angle checker 1 x 90 degrees square Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: Prusament PLA Grey Notes: Any material does the trick. Category: Hand Tools
designed this track to build a cross-cut jig for my Ridgid Table saw Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: Prusament PLA Grey Category: Parts
Another VR Gun stock for Onward, Pavlov, BAM, Battle Royal… Parts you will need: One inch wooden stick or PVC tube (approx 45cm is fine, but you can adapt it to suit your preferences) 2 x M4x20mm screws + 2 M4 Locknuts 2 x M3x16mm screws…
Stop block for universal T-Track 3/4" Wide x 3/8" Deep / 19x9.5mm Works with 3-in 1/4 hex screws for the arm, and 1-1/2inch for the block. Here is a link to the track I used for my table saw and my router table:…
Hello folks I was looking for a caged frame under 100mm for interior/exterior FPV and could not find one, so I designed my own. This frame is designed for 20x20mm FC and ESC mount and for 19/2035 propellers, this is a 96mm class frame…
A little push Block 22mm large the photo was an early print and this prototype was a little small, so I modified it for you guys with big hands Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 200…
So far I have : Pole position token (the skull wheel) Flamer Ammo 125mm Ammo Mortar Ammo Rocket/Missile launcher Ammo Caltrop Ammo Glue Ammo Oil Ammo Grenade Ammo Smoke Grenade Ammo Mine Ammo NOS/Nitro Recharge Hazard Token v1 & v2 Vote…
72t HT5M 15mm Pulley with Trampa Hypa hub Adapter, for 8 inches pneumatic wheels. Pulley printed in Alloy Nylon 910 - 50% infill and 6 layers Top/bottom/walls. Adapter printer in Advanced PLA 100% infill. It takes me a lot of time and a…
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…
Another set of walls, barriers, and pillars for Aristeia! the Game by Corvus Belli No support, PLA is fine, print the following numbers: -9x Hex Pillars -6x Double Hex Walls -1x Triple Hex Walls -1x Quad Hex Wallsr -5x Hex Barriers Update…
Modular road system for 28mm wargames such as Bolt Action. Designed for a 6*4 feet table Prime it, Paint it, texture it the way you want. It separates the table symmetrically and the two side roads are optional. Print Settings Rafts: No…
Enclosure for 2 VESCs. Fits Bluetooth module, wires, remote receiver... Printed in Advanced PLA / 50% infill. for the light version. I had also very good results with black TPU 100% infill, it's perfect for a concaved deck, as it will fit…
Just a medium and a large hook for the IKEA IVAR Storage furniture System Feel free to adapt to your needs. Category: Organization
Handle for skateboard, longboard, esk8, and basically any board. Printed in Advanced PLA, 50% infill, and 5 layers bottom/top/walls. It takes me a lot of time and a lot of beer to design these parts from scratch. If you can't buy me some…
Blade guard for custom table saw jigs - Made for a 10-inch blade Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Infill: 30% Filament: Prusament PLA Grey Notes: Any material does the trick.…
I have printed the pulleys, motors mount parts in Nylon The covers and enclosures are printed in Pro PLA. I printed the seal for the enclosures in TPU. It takes me a lot of time and a lot of beer to design these parts from scratch. If you…
Hello folks This frame is a remix of my PEX96 frame, it is designed for 20x20mm FC and ESC mount and for 19/2035 propellers. This is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been…
The "PEX board" is an open-source electric longboard project that everyone can build without any particular skills (except for longboard basics). FYI, I have not designed the wheel pulley, I used this model:…
Print one and mirror a second one for the other side Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PLA Grey Notes: Any material does the trick. Category:…
Motor mount for Trampa Vertigo / Ultimate Trucks with belt tensioner and motor/belt covers.\ You need to use a CNC for the Motor Mount v2 Part, I used a 1/4inch aluminum (6061 grade) Print the Mount base and truck ring in PETG, Pro PLA or…
This is an adapter for the 600TVL 120 Degree Camera and for 20mm nylon spacers. One M2 10mm Screw is needed to tight the camera holder to the support. Attention: Some esthetic adjustments are needed and the frame will be updated soon How…
Stand for 2mm needle files set Category: Tool Holders & Boxes
This enclosure has to be printed in multiple materials: PETG TPU (90A) PLA + the qty and material you need to use are in the file name of each file Comment, subscribe, enjoy! It takes me a lot of time and beers to design these parts from…
Enclosure for EZRun Max 6 ESC / Trampa deck. Printed in Advanced PLA / 50% infill. It takes me a lot of time and a lot of beer to design these parts from scratch. If you can't buy me some time you can at least help with the beers on…
Enclosure for 2 Enertion FOCBOX Vesc / Trampa deck. It fits two heat sinks (60x60mm) under each FOCBOX for optimal heat dispersion and there are two openings to ensure that there a good airflow on each heat sink. Printed in Advanced PLA /…
To wszystkie aktualnie dostępne wyniki.
