Liczymy pasujące modele…
Gives a nice place to put a 12mm wide label that can be easily swapped between boxes. If you want to get really cool with it, add some text in the slicer and print the label with multiple colors.
Simple stout hook for hanging my backpack on the wall. The holes are sized for #8 screws that came with my drywall anchors. I printed mine with these settings and it seems plenty strong: 0.4 Nozzle 4 wall loops 5 top/bottom solid layers…
Requires the following hardware 2x M3x4x5 Heatset inserts 2x M3x8 SHCS Part A needs supports to print correctly.
Simple device to snap onto the door handle to keep from accidentally locking the door behind you. I printed this one in PETG because there’s some need for the part to flex to snap around the handle. I designed and tested this on a 1997…
I needed a desk stand for my 13” iPad Pro that was very stable and wouldn’t rock around when its being touched. The bottom of this design has spaces for attaching self adhesive wheel weights from Harbor Freight and some spots for little…
Specifically designed around a Yeti Rambler can koozie and the NIU KQi2 Pro scooter. Replaces one of the reflectors and uses its M4 bolt holes. You need the following hardware: 2x M4x12 bolts 2x M4 Washers Probably best to print it in…
Mount for the Big Tree Tech SFS 2.0 for side mounted spools on the Voron Switchwire. I used the spacing from the side spool holder from here:…
Some simple straps that will slide around a Seagate external hard drive and allow you to attach it to the wall. I did this to free up desk space and keep from knocking it over. Print it on its side with some chunky layers. I printed this…
I designed this to take a bowden fitting that has an M6 thread (the Fusion 360 files are attached if you need something different). The threads weren't perfect when I printed them, but they clean up nicely with an M6 tap. It attaches to…
3” Diameter round dough cutter, ideal for making English Muffins
Adapted the mounting points to align with the Bondtech LGX Lite Pro and XOL Carriage. BOM: - 1x M3x4x5 Heatset (Voron standard) - 1x M3x6 BHCS (Board to mount heatset) - 2x 20mm M3 Standoffs - 2x M3x12 BHCS (Mount/board to standoffs) - 2x…
I didn't feel like the vase mode print of the spacer for the RackStand was sturdy enough so I drew up a simple spacer that prints flat on the bed. The STL is for the 100mm arbor on the original model, but I've attached the f3d file to set…
Designed to fit around 1” aluminum thwarts to easily clip things to it with a carabiner. Print it in TPU and it will easily flex around the thwart. It’ll stay attached while portaging as well.
You want a little bit of flex in the material, so I printed this in PETG
I needed a trash can next to my printers and designed one so I could print it with the tail ends of some spools. Its chunky, I recommend using a large nozzle.
Simple case to store your fancy calibration camera when not in use. There’s a spot for an 8x4 magnet that will hold the camera in the bottom of the case. https://www.emberprototypes.com/products/cxc
This is a snap on piece to wrap the cordage around for your Fiskars pole saw. I’d print it in PETG since it has a little more give when snapping it around the handle. There is some hardware required for assembly: 8x M5x16 bolts 8x M5x5.8…
I printed mine in Jessie PETG with a 0.6mm nozzle, 2 walls, and 7% infill. The holes are sized for the following items: Epoxy: https://www.homedepot.com/p/J-B-Weld-Clear-Weld-Pro-8-oz-2-Part-Liquid-Epoxy-50240H/303710974 Brushes:…
A simple place to put the spare nozzles that come with the RIDGID hot glue gun. Here is the OnShape project if you'd like to customize it:…
Credit to the Sparta3D filament box for the design. I used this as a project to learn some design tools and make something silly. Throw in a pause to change filament colors. Attach it to your frame with some M3 bolts for an easy +5…
Mine fell off and I can’t find it so I whipped up this quick replacement. Use an M3x4x5 (Voron standard) heat set insert
To wszystkie aktualnie dostępne wyniki.
