Liczymy pasujące modele…
I needed an easy way to identify which PTFE tube was which so I created these slide on labels. Print face down. The newest version of PrusaSlicer asks to convert the numbers from imperial to metric. Not sure, why. Everything was designed…
Remix of a remix. Following changes: Adds the missing knob, sized for 3/8" bolt Adds a retainer for the nut resizes the hole in the tuning stand to accommodate the height of a 3/8" nut Resizes the hole in the bolt cap to accommodate a…
Sonic the Hedgehog Neckerchief Slide
Remixed from https://www.thingiverse.com/thing:4620124 Converted to tri-color and made for the MMU.
I took the original Open SCAD file and modified it so the D shaft was rotated 90 degrees so the knob would line up with the original knob. The Open SCAD file has two options added. One to adjust the wall thickness of the shaft, and one to…
Remixed from https://www.thingiverse.com/thing:2858570/files Loaded into MeshMixer, then I did edit -> generate face groups. Then I combined the face groups into smaller face groups. Then finally I generated a complex from the 6 remaining…
Converted the source file to one that will work on an MMU.
Scout neckerchief slide for Troop 300. Designed for multi-material printing. Print instructions Designed with a flat front to the tube and 5mm pegs this design should hold up well to more fidgety scouts!
Remix of Hydra Logo Magnet. Split into two parts to make printing with the MMU easier. Also resized the magnet holes to be 8x3mm
Replacement foot/peg for the Mono X vat. Use E6000 to adhere new peg in the hole.
Remix of a rim guard for a XR sized to git the GT. I don't recall where I found the XR rim STL so I'm unable to give credit where its due for the original file. Print in the given orientation with supports. Adhere to rim with 3M VHB tape.
This is a cell phone holder that clips onto a pair of crutches 19.2mm diameter tubing. It is sized for an iPhone 13 Pro Max in a case, so it should fit almost any phone. Can be clamped to itself, or through an existing hole in the…
Skull and bones stomp pad. 183x150x10mm dimensions. Main body is 5mm high, nubs are an additional 5mm high off the base. Print out of PETG with 100% infill for best results.
Batman Snowboard Stomp Pad. The Prusa 3D viewer shows the part as just an oval with nubs, but the Batman symbol is there. Base height is 4mm. Nub height is 5mm for a total height of 9mm. An alternate version with has been uploaded which…
I rotated the lower body to lay flat on the print bed for easier printing. I also increased the inside of the slide area by 0.2mm in all directions. I also removed .1mm from both sides of the rails on the main body. This makes it…
Remixed from https://www.thingiverse.com/thing:4433303 https://www.thingiverse.com/thing:5279680
Leash for the MSR fuel bottle cap. Loop the large end through the small end around the loop on the cap. Then push the large end over the neck of the fuel bottle. Print instructions Print in a TPU/TPE. I used Priline as its $25/kg on Amazon.
This is v2 which rounds the ends a bit so they fit better on the OW.
Print in the given orientation with a 2mm brim. v2 will need to be printed with supports for the rounded corners.
cloud-shaped stand. Fits the standard digital humidity/thermometer assembly from AliExpress.
Replacement front pegs for Microsoft 4000 keyboard. A wedge has been removed from the peg so the pegs should sit flat against your surface. You will have to turn the peg so the wedge is towards the back of the keyboard. Print with 15%…
Print face down with supports everywhere at 100% infill. This will leave you with only supports underneath the tabs of the PopSocket which should come up easily with a razor.
Housing for CKCS U4E PD64W board on AliExpress. I took the measurements, Claude designed the case.
To wszystkie aktualnie dostępne wyniki.
