Liczymy pasujące modele…
UPDATE 1/29/20: Design update to v2! Thanks to input from members here I reworked the stack so the fan is now in-between the HEPA filter and the carbon chamber. This means the fan is now pushing air through the carbon rather than pulling…
Doorstop for a Mercedes Sprinter side door. Stops the door halfway (or where ever you want it to). Attaches to roller track with double-sided tape and acts as a trap for the door roller. Door can be pushed over and past the stop to fully…
UPDATE 05/04/21: Files added for Prusa Mini build plates. ------------------------------------------------------------- The Expandable Steel Sheet Holder by @Whity is a great design and I was looking for a way to incorporate it into my…
UPDATE 2/14/24: There are now two remixes for this design that replaced the bearing spools with fully 3d printed alternatives with capped ends. I've switched all of my rollers over to these remixed version as they simply work better and…
Needed a way to mount bikes with thru-axles in the back of my van. Decided on this clamping design as its easier to load and unload bikes rather than solid thru axle mounts that I used in the past. This was designed to work with 12x100mm,…
Need some extra 1x1 bins for the Sortimo system but the models I found online were not exactly the same as the originals and most importantly did not have the registration "feet" that keep the bins from moving on the box's internal grid.…
I need a divider for the Sortimo 1x1 bins as I had a lot of small items that needed less space then the orginal bins provided. Turns out that a vertical divider wouldn't work due to the design of the lid so I came up with these removable…
A quick and easy way to add a label to Sortimo 1x1 bins. Just pressure fits into the bin and is easily removed if you want to change it around. Made this to compliment the 1x1 Insert Dividers I also made for the 1x1 bins. 1x1 Label Collar…
Label Collars for the Bosch/Sortimo 1x1 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
UPDATED 04/11/2020: After playing around with the stock Prusa frame, it turns out that if you flip the frame over and install the shield with the pegs on top, you can use the 10mm height v2 visor and it fits great. Check photos for…
Label Collars for the Sortimo 1x2 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to add in organization. Collars are designed to lock into the divider slots.…
We make Zimtsterne cookies every year and the dough is so sticky that it can be a pain to get out of standard cookie cutters. I decided to try and make a spring plunger style cookie cutter and it turned out great! The shaft is 8mm and…
Label Collars for the Bosch/Sortimo 2x2 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
Label Collars for the Sortimo 2x2 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to aid in organization. Collars are designed to lock into the divider slots…
Label Collars for the Bosch/Sortimo 1x2 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
UPDATED 04/11/2020: After playing around with the stock Prusa frame, it turns out that if you flip the frame over and install the shield with the pegs on top, you can use the 10mm height v2 visor and it fits great. Check photos for…
Bin divider for the Bosch/Sortimo 1x1 i-Boxx72 bins. Stacks into the 1x1 bins and provides a divider for small parts. Also has room for a 12mm label. Check out my other prints for the Bosch/Sortimo i-Boxx bins! 1x1 Label Collar…
Really like the original design this was remixed from for the following reasons: Comfortable design Adjustable tabs Tabs can be cut off to adjust fit without affecting function Minimal use of filament/time And most importantly, out of…
Label Collars for the Sortimo 2x3 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color coat the black Sortimo bins to aid in organization. Collars are designed to lock into the divider slots…
Hello again! I recently got into 3D printing and it didn't take long before I wanted to print/make an enclosure for the Prusa MK3s. I came across this LACK enclosure https://www.thingiverse.com/thing:2864118 # and gave it a try. I loved…
Label Collars for the Bosch/Sortimo 2x3 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
UPDATE 04/23/2020: Added an updated version that extends the hex hole as requested in comments. New part is "Squirt_Hero8_Mount.Prop_Nut_Version.stl" Minimalistic GoPro Hero8 Mount for the Shendrones Squirt Printed in Sainsmart TPU and…
Label Collars for the Bosch/Sortimo 1x6 i-Boxx72 bins. Press fits into the opening and provides a spot for a 12mm label. Also can be used to color code the bins to aid in organization. Collars press fit into place and can be removed.…
Turns out that if the parts are small enough, they can still escape the bins in the Sortimo carrier. I had an issue with BBs making it out of a 1x2 bins so designed a cap that fits snuggly into the bin but can still be removed easily.…
Wedge for the Arlo Doorbell to accommodate siding. Fits under that stock Arlo mount perfectly and has passthrough that matches stock for wiring and screws. The angle of the wedge is 5 degrees which is .5 degrees off level which was…
A custom mount for the Euroloft wrench that is needed to manually move the bed in the Winnebago Revel in case of electrical or motor malfunction. There was no good place to put it so made this little bracket to store the wrench under the…
UPDATED 11/30/19 - Improved USB-C Dust Cover alignment Added an integrated USB-C Dust Cover to the Shendrones Squirt DJI FPV Holder.
To wszystkie aktualnie dostępne wyniki.
