P
PrintablesPromptedFox9504
iron man skull
it is a remix, printed in pla. supports needed for the back of the helmet. no supports needed for the skull. the infill I used was 10%.
- Pobrania
- 556
- Polubienia
- 93
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesPromptedFox9504
mandalorian skull
supports are needed for the jaw, and pretty much all of the under side until you get to the skull. I printed on ender 5, with extruder temperature at 215, and bed at 75.
- Pobrania
- 534
- Polubienia
- 133
- Ocena
- 5
P
PrintablesPromptedFox9504
master chief skull
I printed in pla, ender 5 with bed at 275 and nozzle at 215. you need supports for the chin and the back of the head. do not turn on Cura supports or else they will be really hard to remove from inside the skull. do custom supports, so…
- Pobrania
- 215
- Polubienia
- 55
- Ocena
- 0
P
PrintablesPromptedFox9504
knight helmet with skull
this is a knight helmet and no supports or rafts are needed. remove the little triangle pyramid things at the chin, as those are the supports. I printed on ender 5 with bed temperature at 75 and nozzle at 215 with the infill at 20%. mine…
- Pobrania
- 98
- Polubienia
- 27
- Ocena
- 0
P
PrintablesPromptedFox9504
bird skull
It is really an easy print, but the file is really small. Just upscale it (if you want to,) and hit print. It is completely support free, and I know it doesn't seem like it has an eye one the pictures, there is actually an eye on the…
- Pobrania
- 90
- Polubienia
- 20
- Ocena
- 5
P
PrintablesPromptedFox9504
black panther skull
I believe the model needs supports. I printed on Creality Ender 5, with bed at 75, and extruder at 215. mine came out very warped, with holes all over the skull, and a couple long, deep, straight holes too. on my first attempt, the whole…
- Pobrania
- 41
- Polubienia
- 18
- Ocena
- 0
P
PrintablesPromptedFox9504
articulated anything
it is just a really simple STL model, with a bar going through a hole. it is completely remixable. I printed on ender 5 with bed at 75 and extruder at 215. remove the small cones as they are just supports, and add as many as you want in…
- Pobrania
- 30
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPromptedFox9504
free guy plaque
it may be a print fail a the base, and it is a single colored model. I printed with the nozzle at 215 and bed at 75 on an ender 5 with PLA. no supports needed. the letters were kind of changing / moving, during filament change,, so just…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPromptedFox9504
articulated something
I printed on ender 5, with nozzle temperature at 215, and bed at 75. remove cones, as they are just supports. may not work bigger without supports in the middle, but I have not tried that yet. New easier model coming soon!
- Pobrania
- 23
- Polubienia
- 7
- Ocena
- 5
P
PrintablesPromptedFox9504
master chief quote
it may need to be thinner to print right, I printed on CREALITY Ender-5 with the temperatures as extruder at 215 and bed at 75. all of my plaque thing designs that I make, don't work right at first, as they usually are hard to get to…
- Pobrania
- 23
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPromptedFox9504
linkling-no feet
it may fall over, but for me most of the time it will work. I printed in PLA, with the bed at 75, and nozzle at 215. I had the infill at 20%. rafts or skirt are not needed, but may help them stay up.
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.