Liczymy pasujące modele…
A simple toothpick for small swiss army knife's. I needed a new toothpick for my swiss army knife but all of the designs I found wouldn't fit my knife so I made one to look nearly identical to the original toothpick that came with the…
Clay tablet; letter from Nanni to Ea-nasir complaining that the wrong grade of copper ore has been delivered after a gulf voyage and about misdirection and delay of a further delivery Production date: 1750BC Museum number: 131236…
A collection of F1 cars from the 1990's to the early 2000's NOTE : I haven't printed these models yet, they might need a few adjustments in your slicer. (from what I've seen in my slicer you might need to take off 0.1mm from the bottom)
An Airsoft 1911 Holster Layer height: 0.2 Infil: Not Important Material: Creality Hyper Pla-CF Support: No Printer: K1C
iPhone XS Max Venom case made to print with PLA. Print settings: Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.28mm Infill: Gyroid, 10% Filament brand: Devil Design Filament color: White Filament material: PLA
A simple toothpick for small swiss army knife's. I needed a new toothpick for my swiss army knife but all of the designs I found wouldn't fit my knife so I remixed one I found to look nearly identical to the original toothpick that came…
A late 80' / early 90's F1 Car NOTE : I haven't printed this model yet, it might need a few adjustments in your slicer. (from what I've seen in my slicer you might need to take off 0.1mm from the bottom)
I was bored and made an potato cannon and a lazer sight for it The picatinny rail is a slightly resized version of nosbigxam's 1.5' PVC Potato Cannon Picatinny Rail: https://www.thingiverse.com/thing:1239450 The lazer sight is a highly…
A 1/18th scale rc car body (designed for the Latrax Teton) Print the Pin at 83.33% scale Parts Needed: 4 Pin, 2-4 BodyPin Layer height: 0.2 Infil: 10%+ Material: Creality Hyper Pla Support: Yes Printer: K1C
A Shark Tooth Holder Layer height: 0.2 Infil: 5%+ Material: Creality Hyper Pla-CF Support: No Printer: K1C
Full version, can be printed without top and bottom layers to use the infill as a grill Printed with 8-10 walls, 10% Honeycoamb infill and Creality ASA Mounted on the side pegs of the air vent
A simple 3D model of the Apollo IE supercar. NOTE : I haven't printed this model yet, it might need a few adjustments in your slicer.
A Batman Batarang Holder, made after the Prusa version ( https://www.printables.com/model/425827-batman-batarang-high-poly ) Layer height: 0.2 Infil: 5%+ Material: Creality Hyper Pla-CF Support: No Printer: K1C
Print settings: Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.08mm (should work up to 0.28mm) Infill: Gyroid, 10%+ Filament brand: Devil Design Filament color: White Filament material: PLA
DISCLAMER: This is a temporary replacement and shouldn't be used at speed , proper materials are essential (Ex: ASA, ASA-CF, PPA-CF etc.) A replacement brake lever for the Honda Transalp, modeled after the original brake lever on the 2001…
Drawer with a 4x4 gridfinity baseplate made to fit in the spare mounting holes on IKEA standing desk. Designed for easy and fast printing!
A Lazer Engraving Table for engraving 15 nametags at once Layer height: 0.2 Infil: 6-10% Material: Bambu PLA (higher temperature filament recommended) Support: Yes Printer: Bambu Lab X1C
Front mudguard for bikes, mounted with zipties. Print settings don't really matter, just use +2 walls +10% infill Printer Used: K1C
To wszystkie aktualnie dostępne wyniki.
