Liczymy pasujące modele…
German: Anschlagpuffer Heckklappe für z.b Opel Vectra C Teilenummern: Opel-Nummer: 0176731 GM-Nummer:24427457 English: Bumber tailgate for example Opel Vectra C Part Numbers: Opel-Nr: 0176731 GM-Nr:24427457 Note: This is not a original…
You need a M6 bolt for this knob! Note: If the handle is used for a original Tormek sleeve, an ~M6x9 V2A screw is required If you use it with my own designed Plastik sleeve, an M6x12 V2A screw is required My sleeve:…
Rain and dirt cover for 150mm kg pipes There are two versions!: Version1 / KG_Rohr_Regenschutz_Full_Airflow.stl: Has 100% airflow of a 150mm pipe Version2 / KG_Rohr_Regenschutz_Small_Printers.stl: Has 70% airflow of a 150mm pipe (For my…
This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit. You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out…
Small and simple grindstone holders for Tormek stones. There are 3 different versions: 250mm: high: 140x120x30 mm 94g / 20% low: 139.4x110x25 mm 79g / 20% 200mm: low: 120x100x25 mm 59g / 20% The original version is the high profile…
Horizontal Base for different wet grinders like Tormek. After print you need: -4x V2A countersink screw ~M5x20 -4x V2A washer M5 -4x V2A nuts M5 -2x V2A nuts M6 -2x knob screw with V2A M6x12 -Superglue -maybe you need a 12,5mm drill to…
Eng: Metric drill bit holder for 1-14mm drill bits with different angles. Fusion 360 file is also added. Feel free to make new remix. Ger: Metrischer Bohrer Halter für verschiedene Spitzwinkel. Die Fusion 360 Datei befindet sich ebenfalls…
AssemblyAid: -For dart cups with a neck diameter of 5mm -For dart shafts with a diameter of 2,5mm Notice: With the assembly aid, the shafts can be glued straight into the cap with superglue! Dart Cup Dimension(mm): Cone_Diameter: 16…
Ersatz Zahnrad für Playmobil Gabelstapler 3605
Leather Honing Wheel for Tormek T4. You need: Natural Leather ~500mm x 25mm x 3mm Glue: Superglue, Epoxy or Siliconglue etc… Sandpaper ~#100 to roughen the surface of leather and disc Sharp knife to cut the leather Triangle ruler
Different wall Mounts for Tormek Jigs
No Supports needed! Endcap at one side for better print bed adhesion! My printer settings: -Material: PLA -Infill: 40% -FirstLayer Speed 25mm/s -FirstLayerFlow: 200% -adhesion: Brim
Rändelmutter z.b für Tormek! Note: -A M12 DIN 934 Nut is needed
Storage Box for Apex Edge Pro stones. It's made for Naniwa Professional/Chosera stones but other stones like the original stones will fit perfekt too. If you like it please vote. Thanks
Upgraded Version of the original File with adjustable T-Slot slider! You can use the original 8mm dial indicator mount from the original author. Fusion 360 File is added! Thanks to the original owner!
Summary: Replacement Rubber for Tormek Drive Wheel SA-250. Maybe it works with other Tormek Versions like T7 and SG-2000 too. Print Settings Printer: Ender 3 S1 Rafts: No Supports: No Resolution: 0,2mm Infill: 65% Filament brand: Filaflex…
Fahrgestell für Playmobil Odelfass 1977. Es fehlen Teile wie z.b. der Werkzeugkasten! Falls ihr den Rahmen daher noch ändert wollt habe ich euch die Fusion 360 Datei in den Anhang gelegt. Viel Spaß damit
Rubber feet for Tormek SA-250 and other/ Gummifuß für Tormek SA-250 und andere Modelle Note: Both parts must be put together only after printing. Use double-sided tape for assembly Materials: Tormek SA250 Fuß Gummi → TPU Tormek SA250 Fuß…
Adapter um ein Messer/Klinge an einer Wolf Teleskopstange zu befestigen. Nützlich um Austernpilze zu ernten. Es können verschiedene Messer daran befestigt werden! Das Opinel ist nur nur eines von vielen! Benötigt werden: Zwei bis drei…
Gummipuffer Führungsschieber Ulmia Gehrungssäge 348, 352 & 354 Rubber Buffer Druckmaterial: -TPU
Protection Caps for Zeiss West 8x20 Binocular Note: -print with TPU 100% infill -There are two versions (oval and round)
Magnet Holder for Tonor wireless Mod Mic. There are two Versions for different magnet sizes: Original: 14x3 Custom: 16x3 The fusion 360 file is also attached
German: Magnetische Box für z.b. Wattestäbchen. Für die individuelle Größenanpassung steht das Fusion 360 File zum Download bereit. Pro Bauteil benötigt man 4 Magnete. English: Magnetic box for cotton swabs, for example. The Fusion 360…
Small and simple grindstone holder for Scheppach Wetgrind XL stones. Dimensions: 140x110x25mm The holder is very stable! You also have a gap of ~8mm between stone and bottom. This allows the stone to dry better
English: Magnetic door lock for self-built 3D printer housings and other housings that were built with a Bosch 2020 Nut 6 profile. The Fusion 360 files are available for download if changes need to be made. With the Fusion 360 files you…
Wandhalter für Wolf VA 389b Vertikutierer Walzen. My printer settings: -PETG 75% Infill
Makita DCG180 142071-2 Piston Kolben Alternative Requied: -Hexnut M3 DIN 934 (Wrench size 5.5mm) / Sechskanntmutter M3 DIN 934 Schlüsselweite 5.5mm
Magnetic Storage Box for Helios Preisser Micrometer 100-125mm: Details: Material: PLA Magnets: 4x5mm (8 pcs) Notice: If you need other box/magnet sizes, the Fusion 360 File is also ready for download.
You need: Superglue Sandpaper 2x M3 x 8 2x M3 Threaded insert (my insert M3x5mm) Side cutters Note. Melting down threaded inserts Cut away any protruding or sharp material at the Bruder toy. Roughen the adhesive surface with sandpaper.…
Mod Mic Mount for AKG K712 Pro You need: 2x M2x 5mm countersunk screw 2x M2 Nut 2x Washer 5mm drill Disassemble Headphone:
To wszystkie aktualnie dostępne wyniki.
