Liczymy pasujące modele…
Arrietty Hair Clip Arrietty's famous hair clip, from the famous film: "The Secret World of Arrietty", by Studio Ghibli Incorporation. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: R equired Brim: Not…
Tower Dice - Medieval House A little medieval house where you can throw dice. → Including simple assembly and an interactive door. → 3d texture. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Brim: Not required -…
Eternal Pose Eternal Pose on scale, that's just waiting to find out where you're going. Based on the famous manga One Piece by Eiichirō Oda. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: No r equired…
Keycap for your keyboard. Print in 3 parts: - the base ; - the tower ; - the eye of sauron. Add a dot of glue if you wish between the base and the tower. The prints on the photos are made in PLA and for the translucent eye in PETG.…
Phone holder adapted for phones with shell.
Cable protector suitable for the RHINOSHIELD USB-C to USB-C Charging Cable.
Egg support Small stand for up to 9 eggs per tier. Parameters selected : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Infill: 15% Brim: Not necessarily required
Storage drawer for Wanhao D12 230 printer. Internal storage: 92 x 92 x 30 mm. Max print size: 147 x 109 x 41 mm.
Joystick cap used as part of an xbox controller.
Tardis storage box with light Tardis, a police telephone booth in reference to the cult series Doctor Who. Incorporating an LED illuminating it from the inside, with a drawer for Nintendo switch cartridge storage. - Printing…
Mini Wanhao D12 230 Simple representation of the Wanhao d12 230. Model composed of 7 parts and for customization a drawer and a BL TOUCH. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required…
Suitable for bearings with inner diameter 7 mm and outer diameter 22 mm. Installation of a dowel to connect the shaft. Easier to use for a 1kg coil. [Remix soon]
Wood Sign Small wooden panels to plant in plant pots for decoration. - Printing characteristics : It is advisable to print them standing up for a better appearance of the textures, as can be seen in the photo below: Print: 0.2-0.3mm…
Little Medieval House M3x10 screws (for the actual size) or glue is recommended.
Door closer Simple clip to close door. - Printing characteristic : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: R equired for the Clip male Infill: 15-30% Fill pattern: Support Cubic
Miquella's Cross Earrings Simple representation of the Miquella cross from Elden Ring adapt to hang as an earring. - Printing characteristic : Adapt the scale of the part to the desired size. Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3…
Storage for sponge Storage for 4 sponges, separated by 3 parts: A base (for the water flow); A grid (for the passage of water); A storage for 4 sponges. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not…
Crimp Game Put your stamina and strength to the test with the crimp game and beat your friends one by one. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30%
BL Touch cover BL Touch cover use for WANHAO D12 to reduce the light emission caused by the LED. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Speed: 40 mm/s (you can do much more) Perimeters: 3 Support: required Infill:…
Plates for keys that can be assembled in hexagonal form.
Excalibur (from BBC's Merlin) The Excalibur from BBC's Merlin series, perfect for your costumes or figurines. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: No r equired Brim: Not required Infill: 15-30%
Nintendo Switch Cartridge - Storage Box [Starfield White Version] Storage box for Nintendo Switch cartridges with rotation system. Based on Starfield designs. Recommend for installation : Compression spring Ø 18 mm and length 27 mm (≈);…
Medieval Tower Decoration A small tower to decorate your desk or even your aquarium. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30%
Mini Wanhao D12 230 Simple representation of the Wanhao d12 230. Model composed of 7 parts and for customization a drawer and a BL TOUCH. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required…
Voron Mantis with Knomi Small cover for Voron Mantis head with Knomi incorporation. These designs meet customer expectations, and probably not their mountability. It is therefore necessary to modify them to meet your expectations. -…
Book support Small support for stacking up to 3 books. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30% Support : normal or arborescence
Nintendo Switch Cartridge - Storage Box [Starfield Blue Version] Storage box for Nintendo Switch cartridges with rotation system. Based on Starfield designs. Recommend for installation : Compression spring Ø 18 mm and length 27 mm (≈);…
Tray for Zelda figure Tray for Zelda figure under glass bell. URL : Glass bell reference (Ø 16,5 x 27 cm) - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30%
Bevel gear 13 tooth Small bevel gear for sewing machine
Medieval GPU Support A little tower to support your graphicscard - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30% Support : arborescent
Photo frame - Instagram Photo frame in the format of an Instagram publication for original placement of your photos. Parameters selected : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: Classic supports are only required for the inner…
Coasters PEANUT Coasters depicting the various PEANUT characters. (Create with one AMS and complete with posca) 3mf files are colorized, unlike stl files which have a face with the drawing, sometimes not complete, and therefore require…
Lego Saturn V blast off into a work of art Creation of a printable version of Asa Miller's bast off incorporated into a work of art (1000x1500mm). URL : Making a Lego Saturn V blast off! by Asa Miller - Printing characteristics : Print:…
Magnetized Medieval Wall Representation of an assemblable and magnetic medieval wall. Recommend for installation : Magnets Ø 5 mm ↥ 2 mm. 4 types of wall : Simple wall Deteriorated wall Simple wall with brands Deteriorated wall with…
Dishcloth holder Three hooks for three tea towels ! - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30% Support : normal
Poop Chute - Bambu Lab X1C / P1P / P1S Poop chute redirects directly into a waste garbage can. All you need is a little glue to assemble the two pieces. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 2 Infill:…
Nintendo Switch Cartridge - Storage Box [Starfield Blue Version] Storage box for Nintendo Switch cartridges with rotation system. Based on Starfield designs. Recommend for installation : Compression spring Ø 18 mm and length 27 mm (≈);…
Medieval Direct Drive cover for Wanhao D12 230 Wanhao D12 230 Direct Drive cover in medieval style, with the option of incorporating LEGOs. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30% -…
Pencil Pot Pencil pots in different sizes to organize your workbench. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Infill: 15-30%
XP-Pen 15.6 Pro Graphics Tablet Holder Modification of a 17" laptop stand into an XP-Pen 15.6 Pro graphics tablet stand. - Printing characteristic : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Brim: Not required Infill:…
Storage for XP-Pen touch stylus Make to welcom: The stylus; The handkerchief; And the glove. - Printing characteristic : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: Arborescent Brim: Not required Infill: 15-30% Fill pattern: Support…
Clamp Clamp incorporating a compliant mechanism, printable without support. Produced in 24 hours for the third edition of the 24H 3D Print Polytech Tours . This model responds to two themes simultaneously proposed during the competition:…
Tie Box PLA and TPU tie box - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% - Assembly : Preferable to use glue enter the base and the box. - Part : 1x Base…
Badminton shuttlecock box Tube for storing your badminton shuttlecocks - Printing characteristics : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Infill: 20% Support : no
Simple adjustable pencil holder - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: required only for the plate Brim: Not required Infill: 15-30% Fill pattern: Support Cubic - Assembly : Preferable to use glue.
Robotic Piggy Bank Easy-to-assemble robotic piggy bank. Parameters selected : Conventional supports may only be necessary for the part : "base". Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Infill: 15% Brim: Not required…
Medical Bottle Small bottle with glass and compartment for storing tablets. Made in 24 hours for the second edition of the 24H 3D Polytech Tours . It responds to the theme of medicine, with the aim of making it easier for sufferers…
Bookmarks MONUMENTS Small set of bookmarks representing various historical monuments. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: No r equired Brim: Not required Infill: 15-30%
Small dice in the shape of a spinning top. To customize !
Manual Post-It Small magnetic post-it note to prevent daily and/or weekly actions in your home. (Incurver like a real Post-IT!) - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Brim: Not required Infill: 15-30%…
Coasters box Box for storing coasters - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30%
50th anniversary glass Two versions of a 50th anniversary glass including STL and 3MF files, in normal version and including the first name Nicolas. - Printing characteristics : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Infill: 20% Support…
Wood-effect shelf Small wood-effect decorative shelves, 213mm x 128mm. Parameters selected : For best results, print the part on its edge // the side. Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Infill: 15% Brim: Not…
Flat support for multiple spools is composed of : 4 - ball bearings (to get) 3 - support for ball bearings 1 - support the ball bearings in the center 1 - a base 1 - a tray 1 - a shaft
Soap Bootle Minimalist soap bottle cover with wood effect. Suitable for Head & Shoulders XXL 900ml bottles. - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Brim: Not required
Coasters box Box with TPU and PLA for storing coasters - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% - Necessary : Glue point
Map of the Arêches-Beaufort domain in France - Printing characteristic : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% - Assembly : With glue
Small piece to hang your LEGOs on your fridge
Laundry tag Small labels to sort your laundry in advance! - Printing characteristics : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Infill: 20% Support : normal
Box for laundromat Find a box to store your stain-repellent soap and a box for colored protective towels. Parameters selected : Template included to cut the cork to size to fit underneath. Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Support:…
Freezer tag Small labels to organize your freezer! - Printing characteristics : Print: 0.2mm Nozzle: 0.4mm Perimeters: 3 Infill: 20% Support : normal
To wszystkie aktualnie dostępne wyniki.
![Eternal Pose [One Piece]](https://media.printables.com/media/prints/547020/images/4397735_2a58bf64-c6d2-4d90-b8ba-eef704376816/eternal-pose-1.png)
![Mini Wanhao D12 230 [Version Card Kit]](https://media.printables.com/media/prints/527746/images/4264074_0f653d59-0acc-4070-ab76-e09434d51abf/20230429_165557.jpg)
![Nintendo Switch Cartridge - Storage Box [Starfield White Version]](https://media.printables.com/media/prints/597213/images/4755555_d561b6c7-e6c5-4fc7-b70a-dc8ae8b07d40_503a61a3-49c3-4304-adb3-165cbbc7bd19/unit-white.png)
![Nintendo Switch Cartridge - Storage Box [Eco Version]](https://media.printables.com/media/prints/597225/images/4755574_7b867989-05d0-4aaf-a95a-6de257826c17_f6b655d5-59f9-4304-81b6-ef31e0ac88ce/unit-eco.png)
![Nintendo Switch Cartridge - Storage Box [Starfield Blue Version]](https://media.printables.com/media/prints/596219/images/4749142_e7f9cf58-9db4-49ea-9fa9-77cb9b187609_82e49993-0de8-4e9e-bac9-3b70844fd62b/unit-bleu.png)
![Clamp [Participation : 24H Polytech 3D Print Tours 3rd Edition]](https://media.printables.com/media/prints/892867/images/6879185_447a3522-7b25-4d68-b58d-30d02bfbe250_dbf41c7f-7a7a-45cb-bfef-b707d410170e/clamp-0-presentation.png)
![Medical Bottle [Participation : 24H Polytech 3D Tours 2nd Edition]](https://media.printables.com/media/prints/892861/images/6879172_31e68c6a-0003-46f6-ab92-e1b056bc0eb7_1e65484f-aa88-461f-a109-2763a4982aed/bottle-0.png)
