Liczymy pasujące modele…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
A holder for three Flashforge Adventurer 5M build plates.
Lets you fully secure the motherboard fan in the Flashforge Adventurer 5M so it won't make unnecessary noise.
The holder should be printed on its side for more strength. The fit between the holder and the body will be tight. For best results print with supports on the build plate only and no supports for bridges. You can also use the 4 hook…
Use 2 Skadis Universal Hook by CSD_Salzburg to mount the charger holder onto the pegboard. No supports should be necessary. Holds my iPhone 14 Pro in any orientation.
Material: PLA/PETG/ABS/ASA (be careful with hot garbage that can deform PLA) Orientation: Upright Supports: None should be necessary Infill: 15% Perimeters: 2 perimeters Layer Height: 0.20mm or 0.16mm
Under-desk mount for the CalDigit TS3 Plus Thunderbolt 3 Dock
I remixed Kalcemo's Bambu X1C Chamber Hygrometer to hold a Govee Bluetooth Hygrometer Thermometer H5075 I had laying around. It's visible from the P1S camera for when I'm not within bluetooth distance. I printed this at 0.1mm layer height…
Holds Nendoroid figures with 60mm diameter bases
Print the model diagonally to fit the K1 Max's build plate. Use a hefty brim if you print with ABS (mine warped a bit because I forgot, but it's still usable).
Hangable box for The Crafty Maker's shadow box plates
This is an under-desk mount for the Anker 778 Thunderbolt 4 Docking Station . Print it on its front to orient the layers for strength when mounted; no supports are needed. The holes are sized for M3 wood screws, or you could use Command…
I designed this under-desk mount for ½" Velcro straps . I mounted them with M3 wood screws.
Charge your iPhone in standby mode and a second device at the same time
5-sided allen keys are a niche tool and I needed one for an anti-theft bolt, so I created this model. Print with high wall count to make it solid so it can take a little torque.
Spool roller guide without holes
Dual-slot PCI bracket for PiKVM HAT v3
I modeled this Canon EOS M200 side grip to attach to the camera using the three screws on the right side of the body. Unfortunately it still wiggled a little so I cut a 27mm x 10mm piece of double-sided tape to secure the grip to the…
I wanted a background for one of the original hueforge models , so I made a shadow box using it. The first plate is printed at 0.08mm layer height as originally designed, but the other two plates are printed at 0.04mm layer height. I…
To wszystkie aktualnie dostępne wyniki.
