Liczymy pasujące modele…
3D Printed Vortex Sprinkler – No Moving Parts, Ready to Use This innovative sprinkler is designed for hassle-free use straight off the 3D printer. No assembly or post-processing required. With a smart, print-in-place design and zero…
All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…
Ranging from 2 to 10 slots, these cable-holders can provide a firm support for your cables. Originally made for nightstand, because i'm tired of my charging cable falling on the floor while i'm in bed. Specs: Screw Head 8mm Countersunk…
A simple and effective design, when you just miss some clothespins. No supports, no brims, no sharp edges. Available with 4 different gap sizes to suit every need. L (4mm gap) M (3mm gap) original design S (2mm gap) XS (1mm gap) Ready to…
A simple edit of the original design, which had some overhangs that can be challenging for some materials like PETG. For now this only includes AA and AAA batteries. Like for the original design, the stackable rim is supposed to be glued…
I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…
Purpose This is a foldable hook that you can carry in your purse, designed to hook it on the table when you are outside, and you don't want to put it on the ground. Too many times restaurant chairs aren't able to keep the purse on, so I…
This is a set of radius gauges to measure both internal and external radius of any surface. Even when you dont have the full circle to measure diameter. This set is designed for radius bigger than 20mm, up to 238mm. Here's a list of the…
A support to hold your GBA in a comfy and reachable spot. Screws into the wall with a single countersunk screw. Screw specs: Screw Head 8mm Countersunk Mounting hole diameter 4mm Tips: Enable Arachne perimeters generator, and Organic…
I developed this rearcover by scanning-measuring. Just because the original one start to develop some cracks after some time. Unfortunately, installing this rearcover you will lose the NFC antenna, which is glued on the original…
A modification of the original rearcover. This one has increased thickness, and will lay flat on the table, whithout the cameras sticking out at the back. This one will print in place, and no gluing is required.
Usage: Used to feed the filament from outside of the enclosure. From a spool holder, drybox, or whatever you could source your filament from. It's installed in place of the optional handle, at the side of the enclosure. Allowing to Stack…
If you are here you probably know what this is. Since the original parts ( # B121U0117F ) are quite expensive, and are designed to break every time you have do open up your dash, I designed these ones that you dont need to break in order…
This mug was originally designed to quickly cool down Tea. Designed for SLM Metal 3D Printing Technology, or lost wax casting. Can be printed in pretty much any health safe metal. Thermal dissipation analisys have been conducted both for…
Dig yourself out of the Sh*t. Today
The two supports allows to install the LCD screen flat with the enclosure, if you plan to stack multiple ontop of each other. If you use this design on a non-stacked Enclosure, you will need to raise the whole Enclosure by a couple of…
Compatible with Prusa MK3. This part is designed to fit the standard brass insert that comes with the Enclosure Kit , which unfortunately does not fit the MK3 out of the box. Therefore you'll need to harvest the insert from the original…
This carving tool is a geometry that allows you to easily create quick-latch pockets into your parts. Like a cookie cutter. 🍪 Easily create a latch to firmly and reliably join two parts, while allowing the user to do and undo the latch…
To wszystkie aktualnie dostępne wyniki.
![Fairphone 4 Rearcover [default]](https://media.printables.com/media/prints/564339/images/4520460_dbca6ec0-fc2f-4951-9e65-fc25b66dcd1d/2023-08-26_17-34-31.jpg)
![Fairphone 4 Rearcover [flat]](https://media.printables.com/media/prints/564354/images/4520752_9a8360e2-b316-4503-bb44-a6bc0fc8798e/untitled9.jpg)
![MagFeeder - Magnetic Filament Feeder for Prusa Enclosure [Stackable]](https://media.printables.com/media/prints/552966/images/4439047_27ddde97-1ea2-4d48-9375-e47e6e20f49a/pic_4569.jpg)
![MK3 LCD Flat mount for Prusa Enclosure [Stackable]](https://media.printables.com/media/prints/533926/images/4308534_a8826bc4-08b2-4752-a04c-e55a820bc6c4/signal-2023-07-23-135332.jpeg)
