Liczymy pasujące modele…
By request added another STL. of a Charizard card without the Pikachu logo, it may be a bit darker than the original print (see photo of Hueforge model) For the 90's kid nostalgia, check out my profile for more Hueforge projects ✌ Print…
.08 Layer height for my print and the slice details in the photo, 17 hours at that height with 2 colours and lots of colour changes. If you're not using an AMS unfortunately I don't have seperate files. Took me much longer than I'd like…
Wednesday in a dress, you can make it too with the following colours and instructions or make it uniquely your own with colours of your choosing, I hope to see your make! Using the colours: Black, White, Pink and Purple Swap Instructions:…
Char.. Charmander! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Yellow At layer #17 (1.44mm) swap to…
Bulbasaur! Original artwork by TamberElla Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Green At layer #13 (1.12mm) swap to Yellow At layer…
It's just chicken park but with a half circle hook to mount it, the original was lacking anything to do that with. Just a note, rotating the model 45 degrees will let you add 10-15% to the size with a 250mm plate. Happy printing, great…
Original art by TamberElla Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #12 (1.04mm) swap to Teal ( Light Blue works) At layer…
Original made by Dan the art guy. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Transmission Distance: 0.3 Green Transmission Distance: 8 Blue Transmission Distance: 4 White…
Metallica coasters and holder, holder holds 5x5mm coasters that are 100mm in diameter. Printed at .12 layer height, 4 walls, 50% gyroid infill and octogram spiral surface pattern because it looks pretty neat with the logo. I used…
Homer simpsons face outline with 3x1mm magnet holes print face down
Pi.. Pikachu! Original artwork by TamberElla Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Yellow At layer #13 (1.12mm) swap to Orange At…
Swap at layer instructions for this Charmander card, I plan to add a few more favourites from my old decks, if anyone has a request just drop a comment down below and I'll see what I can do, thanks! Print at 100% infill with a layer…
Took the lovely wall art by Jacob and put it on a simple coaster holder that's made to hold 4x3mm coasters like the hueforge mountain coasters or any other 3mm coasters with 100mm diameter
It's the same model.. but with a hook for hanging
Hello! Here's the instructions to make this print! I hope to see your makes 😁 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Black Transmission Distance: 0.3 Purple Transmission Distance:…
Model cut off of the most detailed lion I could find for the sigil. Scaled up to fit the hotbed and mounted next to the Stark an Targaryan sigils you can find on Printables. If you're downloading please drop a <3 and a make, thanks!
It's the same sign with two 3x1mm magnet holes on the back print face down
HueForge that turned out beautifully when I printed with these settings Original art by KelvinSF on Deviant art Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Transmission…
Mew! Original art by TamberElla Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Magenta At layer #7 (0.64mm) swap to Sakura Pink At layer #20…
10 mm deep holes for storage of badges, make sure the badges you make are scaled to 10mm Printed with 50% infill to be a heavy base 8mm x 2mm holes for magnets and same size holes on the bottom of the base for rubber feet Made for a…
Took the silhouette from https://www.printables.com/model/407014-cherry-blossom-wall-art and added the center of the flower from https://www.printables.com/model/406111-sakura-cherry-blossom-chopstick-stand I painted the petals sakura…
Yoda coaster addition to the others .2 and 50% gyroid always seems to work right for me
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Blue At layer #10 (0.88mm) swap to Ice Blue At layer #13 (1.12mm) swap to White for the rest.
I made these for a friend that's expecting a little girl. Printed 2 of the baby doe coasters in blue and pink for the mum and dad. Would made a nice little gift for newly expecting parents. Printing: When I'm only printing a couple of…
Original art by Adiim Mob Psycho 100 Filament swap instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #8 (0.72mm) swap to BambuLab Green At layer #14 (1.2mm) swap to…
Poster art for the show Breaking Bad Uses Black, White, Green and Red PLA Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Green At layer #10…
Door sign for newborn girl, just add a name. If you want one for a boy just got to the original model on thingiverse, cut the bottom off of this model and assemble it onto the original with a baby buck. I printed with 100 infill and it…
I hope to see your makes! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Original artwork by KelvinSF on Deviant art Filaments Used: PLA White Transmission Distance: 4 Black Transmission Distance: 0.6 Red…
A Hueforge model using light blue, light pink, white and black. I think if you have a slightly darker pink the contrast would look better. I only have Sakura and Candy pink and they're both very light. I hope to see your make! Print at…
Basketball room sign for your kid or teens room with separate files with numbered cards to hang their jersey numbers off of the sign. The card holder can be glued or 2way taped on the basketball sign. I suggest using a matte orange or one…
Every colour is a different layer so you can colour change manually or paint for an AMS I just added the yellow coat of arms to include all of the Nova Scotia flag colours printed .2mm layer height
Hope your make comes out pretty! Original picture by Roman Dubina, their name is at the bottom right corner of the picture Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Black Transmission…
HueForge altered artwork of first gen Pokémon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #11 (0.96mm) swap to Ice Blue At…
Original artwork by Marmaladeturtle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #14…
Instructions Print at 100% infill with a layer height of 0.08mm with a base layer Swap Instructions: PLA Start with Black At layer #7 (0.64mm) swap to Pink At layer #13 (1.12mm) swap to Yellow At layer #16 (1.36mm) swap to White for the…
To wszystkie aktualnie dostępne wyniki.
