Liczymy pasujące modele…
Because my children always broke off the plates when playing, I provided the corresponding parts with little thicker walls. The upper opening was more accurately adapted to the head. I also removed the gap on the right shoulder of the…
Simple case for a single Mini-CD, Mini-DVD, ... (80mm) No support needed. I have print the layers of the “inlay” between 1.2 mm and 3.0 mm with 0.1 layer height, everything else with 0.2 mm layer height. I also suggest to use more top…
for bobbin lacemaking Klöppel; beim Klöppeln verwendeter Garnträger Filament I have used a PLA with wood optic. Support If you print two half bobbins you do not need any supports Infill 20 - 25 % Layer height 0.2 mm Finishing Fine…
I have scaled down the model. The hole for the key ring is adapted and the tip rounded. Height: 60 mm Diameter: 7 mm Filament I have used wooden PLA and marbled PLA Quality wooden: 0.18mm layer height / 0.6mm nozzle marbled: 0.12mm layer…
Elegoo Mars Resin Tank Cover. Suitable for my Elegoo Mars Pro. Should be also suitable for Elegoo Mars. Filament I have used ABS Support no support needed Infill 20% Layer height 0.2 mm Finishing ---
Holder for ”AWG FIRE-EX Turbo 1000" (for Hollow jet pipes) wetting agent cartridge holder and reserve cartridge for mounting on 46mm alu profiles. Support: Print the front part of the body with support. While this is not absolutely…
I have made this cover as replacement for a mercedes truck ("Atego" 2006). Why two parts: To create better stability of the ‘Blindabdeckung-Feder’, with two parts it is possible to print it horizontally and without support. It is highly…
A replacement handle (short version) for pad holders for Senseo Pad coffee machines Ein Ersatzgriff (kurze Variante) für Padhalter für Senseo Pad-Kaffeemaschinen Filament I have used ABS Support Yes Infill 20% Layer height 0.15 mm…
Dimensions: ca. 226 x 57 x 18 mm Weight: ca. 67 g ( = ca. 22 m ) Support: Not needed Hints: For drum and pins (version 1) use an outer brim Two pieces of the selected pin (pin1 OR pin2) are required. If necessary, add a text to…
The filament used must be able to withstand more than 100°C ! You also need 3 pieces of 6.0mm x 3.0 mm magnets (I have used "Wukong 6 x 3 mm Neodym Magnets"), which are then pressed into the holder.
To wszystkie aktualnie dostępne wyniki.
