Liczymy pasujące modele…
Updated model Edit 4.2.2025 Added PETG model That can use also camera cover thath can be seen in gallery. I printed mine without any solid top-, bottom layer and perimereters. Just printed 3d honeycomb with 50% infill. It is very…
Samsung Galaxy S25Ultra cover TPU and optional camera rings. Updated model sligthtly more round bezels and added magnet ring for magcharger. Camera covers has a tiny pocket or sleeve witch held them in tpu case, They seem to hold pretty…
UPDATED model 29/12/2024 Park Tool bike repair stand tool tray. Fit M8 bolt with 13mm nut to tighten tray to stand. I created model without towelholder, wich is hopefully coming later with own holder. I wanted to add longer slots for…
Samsung Galaxy A05s cover I realy liked 3d honeycomb effect with 40%infill, that creates almoust fabric like texture. A05 cover does not fit to “s” model, but I think this will fit to A05, but side buttons slots are bit too long. TPU…
I made cover for my netatmo outdoor module, this can be printed without supports. Just insert outdoormodule between two halfs, screw in stand and then top.
I wanted to make more realistic version for Tamiya Hi Lift axles. All the Hi Lift hardware/internals fit. Diffcover needs m1.6 bolts Files contains tandem axle with drive trough. With these and HiLift internals it is possible to make…
TPU Iphone 16 PRO case with separate camera module cover that can be printed with PLA or whatever.. TPU case will simply hold camera cover in place. With separate cameramodule cover case can be printed thin and not to make phone bulky.
Wanted to make a little color for my bike.
Parametric sleek box with latch. I wanted to make small and as sleek as possible medicine box to backpack with latch and seal. Seal can be printed with tpu if wanted Hardware needed Latch 2 x 30-35mm M3 bolt. Lockable latch need 1x 20mm…
I made trap for mices. Updated older model totally. Printed with 0.4nozzle 0.25 layer high. Mousetrap for bucketlid with print in place hinge. No harware needed Just print both part and cabin is snapfit. Cutout template is for help…
I created case to my phone, that can be attached to RAM mounts. Ball is one inch and case splits in two part. Fast and easy to take phone off from case. Power and volume button also works. I needed to press volume button out of case and…
Holds defa cable away from ground/snow and covers contacts. Also zip tie installation to poles. I don't know if calix cable fits. Please make a comment if it fits also.
Snapmaker U1 TPU filament sideload ptfe tube holder. I wantedt to spot for tube when feeding tpu to printer.
I have "MagSafe" compatible covers in my Galaxy phone, but magnet wasn't so strong. I made adaptable stand. Pegs can be adjust to match all phone sizes. Added M10 size threads just to make little weight on stand, also added rubber strips…
Phoneholder/charger 17mm ball adapter to mount chager to Transit Custom 2024 airvent. Groove inside model is to guide ziptie for easier install. I used fussy skin modifier to ball to get more friction. Hold very well phone.
caulk cartridge sealing cap 24mm wrench you can open it, if glue etc hardens
This tool is safe and easy way to spread jammed pistons on Sram brakes. Just insert this tool and pry pistons in with large screwdriver. After that you can just pull brake lever and this tool will return pistons back in because it work…
Originally created for Mototag, but should be usable also, with AirTag. M3 screw and bolt needed.
72mm filament spool Adapter for Snapmaker U1
Samsun S25 Ultra modular case easy to change RAM/MAG safe/ Can am magnetic For mag safe base, it is easy to add quad lock receiver or something similar if need in slicer. I havent tested MAG safe base how it charges I dont have ring metal…
I wanted to make flat surface adapter for my cellphone charger, wich had only posibility to mount on airvent. 17mm ball adapter for cellphone charger/holde for flat surface.
Edit 21.4.2024 I created snap on lock for this press tool. Sometimes it slipped away without it. I find this also a lot of help when installing tight tires, you could just press and lock other side in rim and just install one side with…
Fidlock bottle holder adapter for Canyon Spectral:on frame
Nest power cable laying around? This will get it sorted. I used support only in reel, cable clip did get allright without support.
I wanted more realistic deeper bed for my Hilux. Ended up with “bed liner” look solution, easy to add afterwards. I added tool for dremel to cut straight line. I made a cut about 8mm under top part of bed. Add “tool” to dremel, adjust cut…
Parametric fully adjustable BITS tray. I added both negative and positive model. There is alot parameters to play with. Added 150x100mm configured model of both. This is easy to add any box with slicer. I made this to my parametric box…
Front and rear bumpers. For the rear bumper print also rear end to frame rails. My other Hilux mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
Tamiy Hilux Hi Lift inside fender Mirror in slicer for other side. My other Hilux mods My other Hilux mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
Tamiya Hilux HiLift chassis base Easy to instal body shell and a lot of room for electronics. All my HiLift mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
I find new G3L Outlander radiator is vulnerable to take sticks inside radiator. So I wanted to make metal cover. I added dxf model for plasma cutters. Also included measurements wher to bend it to make it fit. No need new holes. It fits…
I got Canyon Pathlite:on but I was a little dissapointed, that there were no support to add rear basket easily. I have had earlier Racktime baskets, so I made adapter to this canyon rack also. Installation: They are quite snug fit. I…
Shop towel holder for parktool repair stand. This fits for larger lower leg and tray can be above this. Collar is made by two pieces that slide together, so it is very easy setup. Created spurgears to shaft so that can setup to desired…
Can Am Outlander G3L work light mount Hardware 30-35mm M3 bolt to work as hinge pin. 2pcs M6 bolt to fix mount around bumper tube.
Electrolux/AEG Ultrasilencer vacuum tool holder. There is two model I wanted to make print in one hinge to other model. This hinge model also takes in Ultrasilencer three in one tool also.
Parametrick snowmobile/atv tool holder for tube racks. Holders angle can be adjusted by 15degree steps. Contain also specific holders for Ski-doo Lynx XU frame rear rack holders.
Parametric air louver for house that can be equip with mosquito net, air filter or close for winter insulation. There is a slot for 2x6mm magnets if needed, but not necessary. Also baseplate is not necessary, but it is if need to add…
We had four brushes laying in cabinet, so had to make hygienic holder that is easy to clean.
Can-Am (715006097 ) LinQ 30 US Gal (139 L) Trunk Box to Fit without removing rear rack. I bought this box for my atv. It was annoying that it needed to remove rear rack to make this fit in linq system. I made adapters that make it…
Wiha VDE Lift Up bits holder broke down. I designed different type holder for bits, because it was difficult to use with broken bit holder. Original top cap can be dismantled by removing cover from topcap and unscrew small slotted screw.…
Yota adapter for RC Snow Tracks - No Hardware https://www.thingiverse.com/thing:5222976 Mirror front for right side.
Tamiya Hilux HiLift transmission mount for this aliexpress model Also mount for standard battery between frame rails. All my HiLift mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…
Secondary winch switch for Outlander G3L This takes Warn mini switch inside. I Installed snowplow tilt to work via this switch.
I saw this style bitcontainer for LTT bits. I wanted to make very own model for regular bits. Jar can also used for bit driver altought its not very handy. I made custom threads with three threads. Also wanted to learn how to make car…
I ordered from Ali express some lollipostyle bitdriver (stainless version )and created around that, this container system. You can see from outside what style bits are inside jar. I added 6mm magnets under each bit, but it is not necessity.
I bought 1/4 KS tools set, but I did't like the box came with it. So I made smaller case that fits more bits. Hardware 4x 30-35mm M3 bolt. Lockable latch Need 1x 20mm M3 34pcs 2x6mm magnets Also Knipex Cobra fits top of ratchet if ratchet…
I had a problem with a poorly designed Magura Vyron 3 dropper lever battery cap that broke where the seal lies. So I made more robust model. I made two types of seals to choose probaly best to put both in I have both seals and it fits…
A dual battery system for a Can-Am ATV for winter use and for accessories that draw a lot of current. It takes same size battery, that is original outlander battery. I have it on my Can Am Outlander HD7 G3L Hardware needed Battery…
Left-side armrest for Ford Transit and Volkswagen Transporter (Model Year 2024+) "Fits the latest generation Ford Transit and VW Transporter models (2024 and newer)."
To wszystkie aktualnie dostępne wyniki.
