Liczymy pasujące modele…
Print all in PLA 0.2 mm layer height, supports on some parts You may print tram's top and bottom parts separately or in one piece with color change/MMU. Print tram's top part upside down. The “glass” part is better to be printed in…
This is a quick and easy solution to have a light source on your key chain. You will need a CR2032 cell and a 3mm or 5mm white LED Slightly widen the gap between anode and cathode of the LED so it is bigger than thickness of the CR2032…
3d printed Christmas tree with ws2812 LED strip inside Arduino NANO is used as a controller Print instructions For the tree use any transparent filament. You can also experiment with white opaque filament. For the base use any filament…
Dryboxes for your MMU2S you can print on your i3 Print instructions I do not share .gcode because you can use either PET-G or PLA (do not use ABS/ASA due to shrinkage). Use 0.3 mm Draft profile in PrusaSlicer, vase mode for covers. The…
Happy printing! Print instructions For FFF printing use *.stl file Best print in PLA In Prusa Slicer use either 0.15 mm quality profile with variable layer height or 0.10 mm detail profile For the supports choose pattern angle of 90…
This is one very tough Snowman which will not let you down even after winter holidays. Print instructions Use PLA or PET-G (better PET-G) Print all the parts upright as they are in the files, no supports needed (only bridging). 0.2 mm…
The best friend of your printer Holds all necessary tools as close to the printer as possible Print instructions .gcode file is included Use PET-G, no supports needed For assembly use two 3x40 mm bolts and two m3n nuts from Prusas`s spare…
PLA, 0.2 mm layer height, no supports if placed properly on the print bed. Print all parts separately in appropriate colors and then glue them together.
To wszystkie aktualnie dostępne wyniki.
