P
PrintablesMark_McQ
1/10 RC Rim - 2BS
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 616
- Polubienia
- 127
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesMark_McQ
Tamiya TT02 steering brace
This bolts on over the front end of the steering rack on the TT02 and takes out some of the side to side slop. The stock screws you remove to fit this are too short, you'll need ones somewhere around 15-16mm. When I finished my TT02 build…
- Pobrania
- 570
- Polubienia
- 68
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - Advan 3 spoke
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. Spokes are printed separately and glued to the rim. Includes versions for FDM and resin printing. For personal use only. No commercial sales.
- Pobrania
- 503
- Polubienia
- 95
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - Kyusha
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 369
- Polubienia
- 91
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - Raymo
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 355
- Polubienia
- 78
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - BBLM
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
- Pobrania
- 338
- Polubienia
- 68
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - VGTC
Split rim design. Has 2 variants, one is dished. Requires 10 x M2x5 bolts per rim to assemble. Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Includes versions for FDM and resin. For personal use only. No commercial sales.
- Pobrania
- 315
- Polubienia
- 73
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - Mowmow
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
- Pobrania
- 303
- Polubienia
- 61
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - GB
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 284
- Polubienia
- 65
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - Efforty
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. Includes 2 versions, one for FDM and one for resin. For personal use only. No commercial sales.
- Pobrania
- 261
- Polubienia
- 60
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - C107
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 246
- Polubienia
- 66
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - Prongs
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 228
- Polubienia
- 60
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - Admiral
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
- Pobrania
- 212
- Polubienia
- 54
- Ocena
- 3
P
PrintablesMark_McQ
1/10 RC Rim - Regale
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 185
- Polubienia
- 49
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - Tristar
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
- Pobrania
- 181
- Polubienia
- 42
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - RS Classic
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Comes with some optional insert pieces that can be glued in. For personal use only. No commercial sales.
- Pobrania
- 147
- Polubienia
- 26
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - Reticle
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
- Pobrania
- 128
- Polubienia
- 22
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - 345
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Includes 3 variants of 3, 4, and 5 spokes. For personal use only. No commercial sales.
- Pobrania
- 122
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMark_McQ
Guitar Humbucker style storage box
Storage box in the shape of a guitar humbucker. The lid attaches using 8x 5x2 magnets. Includes 3 lid variations and 2 baseplates. One baseplate has the lugs removed to fit onto smaller build volumes. Dimensions are 106.4 x 47.5 x 231 (Or…
- Pobrania
- 106
- Polubienia
- 24
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - Polar
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
- Pobrania
- 92
- Polubienia
- 28
- Ocena
- 0
P
PrintablesMark_McQ
1/10 RC Rim - Celtic cross
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. For personal use only. No commercial sales.
- Pobrania
- 83
- Polubienia
- 23
- Ocena
- 5
P
PrintablesMark_McQ
1/10 RC Rim - S&S
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. This is a multi-piece rim. For best results ensure you have the flow rate calibrated on your printer, especially for printing the red stripes. I…
- Pobrania
- 51
- Polubienia
- 20
- Ocena
- 0
P
PrintablesMark_McQ
TS100 SOLDERING IRON CARRY CASE
This is a carry case for the TS100 mini soldering iron. It's remixed from two other projects: MuddyMaker's Utility Box - https://www.thingiverse.com/thing:5222235 Ro's TS80 stand - https://www.thingiverse.com/thing:3911603 I've modified…
- Pobrania
- 50
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMark_McQ
Logitech G29/920 screen mount
This is a mount to fit an Elecrow RC0505S 5" LCD screen to a Logitech G29/920. It should fit the G25/27 as well if they haven't changed the distance between the mounting clamps between models. As long as they're approx 210mm centre to…
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMark_McQ
MAGNETIC CABLE GUIDE - FULLY PARAMETRIC
This is a cable guide which is fully parametric via the included f3d Fusion 360 file. The height and width of the cable passthrough area can be set, the overall width/thickness of the main body, the hole size and depth for your chosen…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMark_McQ
Pin press for KevinAkaSam Belted Z mod
This is a tool to help assist with the building of the belted-Z mod by KevinAkaSam. It's for use with the option for the bottom idlers that makes use of 2 bearings instead of the GT2 pulley and is designed to help press in and adjust the…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMark_McQ
STAND MOUNT FOR BIGTREETECH PITFT7 SCREEN
This is a table stand for the 7" DSI Raspberry Pi screen made by BigTreetech. The Pi requires a 90 degree USB-C adaptor for the power plug. Screen attaches using 4 M2.5x12, the legs each use 2 M4x8. The screen should be configured to run…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.