Liczymy pasujące modele…
I hate hanging up socks. This makes it a little better.... For the hexagon look, simply set the bottom and top layers to 0, perimeter 3. Hexagon infill 15%. For more stability it can of course also be printed normally.
When using the original tools, I was bothered by the heating block's great freedom of movement and the tool's poor grip on the fan screws. After damaging the thermistor, I wanted to remedy the situation. I added material above and below…
Nexdruder Lever Mod from Jürgens Core One Automatic Chamber Vent.
For the assembly of my Prusa Core One kit, I constructed this tray to organise the parts for the next step. This way, nothing is forgotten to install. For easier removal of the small parts, all the compartments are generously rounded at…
Buttons for the MMU3 with symbols
Because the Space Pi radiates a lot of heat downward, I made these Space Pi feet to minimize heat on the base. The feet are recessed into the original feet to prevent them from slipping sideways. You can also use a piece of double-sided…
I know there are already many Core One Nozzle Wipers available. Why another one? I simply wanted one that was as inconspicuous as possible and, above all, did not hinder me when changing sheets. I recommend printing with…
I noticed on my Core one that you can already see it on the inside wall where you often touch it with the sheet, which unfortunately cannot be avoided. That's why I designed this protective cover, which can be easily attached with…
A slightly larger tire lever for getting stubborn tires onto the rim. I recommend printing in PETG with at least 4 walls.
The goal here was to mount a camera despite using the https://www.printables.com/model/396461-prusa-mini-z-axis-support-brace-by-maxt-remix The other camera mounts I found collided with the Z-axis support. That's why I made this one to…
This is a holder to attach a Samsung A52 with cover to the CD slot. Other devices up to 160mm long and 12mm thick should also fit. There are two versions. One with a smooth back and one with honeycombs. I glued the two parts with…
A housing for the ESP32 Cam for the Core One. https://www.amazon.de/gp/aw/d/B097Y93P8D?psc=1&ref=ppx_pop_mob_b_asin_title You need 3 magnets 8x3 and 5 M3x6 screws. The housing can be printed without support. I printed my quick prototype…
Schonbacken für die Knipex Cobra 300 Rohrzange. Am besten in TPU drucken.
What is needed for a box. 1x box https://www.amazon.de/dp/B0CFLJCJSF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 4x bearing https://www.amazon.de/dp/B08JLXN2BN?ref=ppx_yo2ov_dt_b_fed_asin_title 1x Hygrometer…
Allegedly, it should sometimes happen that the extruder of the Original Prusa Mini causes problems. It is therefore an advantage if you can observe the movement.
Josef Prusa's tattoo as an indicator of the Z axis for the Original Prusa Mini Print instructions The print is black on both sides, so start with black when printing the Gcode printed. I used Prusament black / orange. Print settings Layer…
Stand for the Triceratops horridus from the museum in Prague. https://www.printables.com/de/model/392173-trik-triceratop
MMU3 tool for easy tension adjustment MMU3 This tool can be used to quickly restore the correct tension. Screw in the screw so that the top is exactly flush with the surface. It is possible that my setting differs from your setting due to…
Sealing washer for better sealing.
A case for the Blurolls kit for the Core One. Should also work with the original fan/filter of the Core One or Mk4 enclosure. However, I was unable to test this.…
My printer cabinet is missing a little depth for the new MK4. I have changed the angle of the LCD holder and reach 25mm more space. The MK4 stands on a stone plate, so it doesn't matter that the LCD now looks out down the printer.…
Important. I will not publish a circuit diagram here. Working with high voltage is dangerous and should only be done with the appropriate expertise. Although I have provided a thermal fuse, I strongly recommend that you do not leave the…
I have 10 dry boxes in use for my MMU3. For the boxes that are not in use, I have this cap with a seal using an oring 3.8x10x3.1. So that I don't have to open the boxes, it holds the filament in place so that it can be easily pulled out.…
I really like the design of the DET-Man, both technically and visually. But I was worried that it might block airflow from my Core One Advanced filter. He generously provided the CAD files, so I was able to quickly create a modified…
Reverse bowden set with M8 fittings. If required, I can provide other diameters. A higher version if you fully spread the height is this version more recommended And a shorter version for the deflection. Depending on your own needs.
To wszystkie aktualnie dostępne wyniki.
