Liczymy pasujące modele…
◼ Voron Stealthburner CR Touch ADXL mount mounts to the original ADXL mounting position on the Voron Stealthburner with a V6 hotend and provides mounting for a CR Touch. CR Touch probe offsets: X = -44.337 mm Y = -1.093 mm ◼ Required…
◼ Voron Trident (AK Stealth Wires) PG7 mount bracket Mounted on the corner of a Voron Trident to hide the CANbus wiring inside 2020 extrusions for a stealth look, created as part of the AK Stealth Wires project. Learn more about the…
◼ Voron Stealthburner hex pattern bevel redesigned the hex pattern with a bevel because I print with external perimeters first. Without the bevel, the main body starts printing over air after the first three hex-pattern layers, no matter…
◼ Voron Trident (AK Stealth Wires) slip in brackets correct height is a remixed version of the @CL Performance part which is 1mm higher than the @LoganFraser mounts, causing the panel to sit unevenly and was modified to fit M3x8mm screws.…
◼ Voron Trident (AK Stealth Wires) wire cover right hides the wiring coming down in from the top rear of the Printer inside the 2020 extrusion profiles for a stealth look, created as part of the AK Stealth Wires project. Learn more about…
◼ Voron Trident (AK Stealth Wires) wire cover left hides the wiring coming down in from the top rear of the Printer inside the 2020 extrusion profiles for a stealth look, created as part of the AK Stealth Wires project. Learn more about…
Archetype (short) Hotend mount for TZ V6 2.0 and 3.0 Designed for use with the Archetype Experimental branch.
◼ Voron Trident (AK Stealth Wires) inverted electronics stepper right is a remixed version of the @LoganFraser part which has a cutout on the bottom to hide the wiring coming down from the top of the Printer inside the 2020 extrusion…
◼ Voron Trident (AK Stealth Wires) inverted electronics stepper rear is a remixed version of the @LoganFraser part which has a cutout on the bottom to hide the wiring coming down from the top of the Printer inside the 2020 extrusion…
◼ Voron Trident (AK Stealth Wires) inverted electronics stepper left is a remixed version of the @LoganFraser part which has a cutout on the bottom to hide the wiring coming down from the top of the Printer inside the 2020 extrusion…
◼ Voron Trident (AK Stealth Wires) Y endstop housing is a remixed version of the Y endstop housing from the official Voron Trident CAD, created as part of the AK Stealth Wires project. Learn more about the Project
◼ AK Stealth Wires This project was designed to clean up old cable chain parts and route all wiring coming down from the top of the Printer inside the 2020 extrusion profiles for a true stealth look, modernizing the Voron Trident.…
◼ Voron Trident (AK Stealth Wires) a drive frame no cable slot is a remixed version of the A drive frame from the official Voron Trident CAD without the cable slot, created as part of the AK Stealth Wires project. Learn more about the…
◼ Voron Trident (AK Stealth Wires) thermistor mount hides the Siboor fume pack Fan PCB, an NTC 3950 100K Thermistor, and the wiring inside the 2020 extrusion profiles for a stealth look, created as part of the AK Stealth Wires project.…
Voron Trident (AK Stealth Wires) xy joint right no cable slot is a remixed version of the xy joint right from the official Voron Trident CAD without the cable slot, created as part of the AK Stealth Wires project. Learn more about the…
◼ Voron Trident (AK Stealth Wires) Siboor blower PCB housing hides the Auxiliary Part cooling Fan PCB and the wiring inside the 2020 extrusion profiles for a stealth look, created as part of the AK Stealth Wires project. Learn more about…
◼ Voron Trident (AK Stealth Wires) disco on a stick mount designed for the 3D Mellow Disco on a Stick LED boards. The optional center piece can be attached with double-sided tape to further secure the LED board. Hides the Disco on a Stick…
◼ Voron Trident (AK Stealth Wires) inverted electronics panel support is a remixed version of the @LoganFraser inverted electronics brackets, with the lower section removed to create supports for the upper panel along the front and sides…
◼ Voron Trident (AK Stealth Wires) Siboor stepper cooler helps keep the stepper motors at lower temperatures. Designed specifically for Siboor 2504 stepper motors and for use with a 4010 fan and stepper motor heatsinks, created as part of…
◼ Archetype Breakneck faceplate for XOL LEDs remixed long-version Archetype Breakneck faceplate designed to reuse the thin 0.8 mm RGB Sequin LEDs from the XOL Toolhead, making the upgrade from XOL to Archetype easier without replacing the…
◼ Archetype Sherpa Micro Breakneck block (Experimental) is a remixed version of the VZ-HextrudORT extruder block, modified to fit the Sherpa Micro extruder. It also includes a BTT EBB36 mount and a modified rear extruder bar for heat-set…
◼ Archetype Breakneck X endstop mount mounts the X endstop directly to the rear side of the rail carriage on an Archetype Breakneck toolhead for the Voron Trident and Voron 2.4. Tested with the Siboor Trident AWD gantry, but should also…
◼ Archetype Wristwatch BMG flat extruder block (Experimental) is a lighter, flat version of the Wristwatch BMG extruder block with modified mounting points to better fit the Archetype toolhead. Designed for use with the Archetype…
To wszystkie aktualnie dostępne wyniki.
