Liczymy pasujące modele…
Tips: Print upside down with tree support and only support on build plate Use a M10 thread cutter for the PC4M10 coupler Drill out the Holes on the countersunk side with a 3 to 3.2mm drill Feed the cables though the little triangle cutout
This is a simple print in place case for the Sequre S60P soldering iron and one additional cartridge. The cartridge is secured by a third magnet to prevent it from falling out. Print Settings: PLA .2mm layer height at least 3 walls I had…
Recommend to print with organic supports on build plate only.
Print Settings: ASA or ABS 5 Walls 5 Top 5 Bottom Alternating Infill 40% Infill of your choice It's quite a lot but the plate needs to be stiff. I used the standoffs, screws and thermal pads that shipped with the GeeekPi Ice Tower CPU…
Is blocky and needs support. Feels just like printing the The 100 ;)
Allows to mount a Strandberg guitar directly to the wall using Loxx Security Locks. I've only printed and used it in PETG. 0.08 mm layers 100% Infill PETG Got the inspiration from jrake's model :)
Designed in Solvespace. Is printable like shown in the images without any support. Prinded with 15% Infill and screwed to a rack with 3x30mm screws to a rack. Update: Now also provides a v2 Version thats a lot more stable.
Requires 4 m5 countersunk skrews to build to attatch to the original and clamp the PTFE tube. Clamp the PTFE tube softly to ensure good filament transportation. Richard has a nice Video explaining the concept.
To wszystkie aktualnie dostępne wyniki.
