Liczymy pasujące modele…
I didnt find any suitable thumbsteer for TQ controller (none on Printables) so I made one myself. It simulates the look of a beadlock wheel. Just replace original wheel, reuse the foam (it fits) and you are good to go. This wheel has less…
This is a simple to print exhaust model for a TRX-4M Defender. It approximately follows the position of a real exhaust, but with a bit of tuning look (big diameter straight tip). There are 2 models - main body to be mounted on frame-you…
UPDATE 7.1.25 Added interior model with pockets / hooks for zip ties to fix the light harness UPDATE 8.10.24 I created and added here an interior that is compatible with Trx 2-speed transmission - it has a “box” around it to accommodate…
EDIT 9/24: Added a strengthened variant because as it is close to body clip, I often accidentally grab the exhaust, and finally it broke. ORIGINAL: Hello. Finally did the exhaust for K10 as well. This is modelled after the stock exhaust…
Its a cross necklace worn by Toretto in F&F saga. So-called family cross. Its not an exact replica, I modeled it just via pictures to be a lookalike. The lower “leg” is movable as the original and is printed in place. May need a few moves…
What you see here is a set of windshield wipers with a license plate carrier meant for Trx TRX-4M Defender. These just clip onto the windshield frame. With this design there are more nails hit - wipers are 1 model, easier to print and…
Hello. This is my model of a hand fan stand. I took inspiration in “original” oriental display stands made of wood / bamboo. It contains features for storing the fan both opened and closed. Whole design was also adjusted with simple…
This is a license plate carrier for the TRX-4M Defender, with a light body on top and mounted with a rear light screw. As can be seen on photo, it fits perfectly between lights, doors and fuel tank holder.
Hello. Since I had the K10 cab measured for the expedition frame, I decided to create a top body as per K5 Blazer style. Excuse any proportional imperfections compared to Blazer, I just used photos as source. Side windows have 1,5mm…
NOTICE: This is not my model I found this free on the interwebs but I dont know exactly where I got this model from. And I cant find it nowhere either. Most probably it looks similar to one from this yeggi site (2nd photo):…
In our country its required to have a front license plate too, so I had to create some carrier for it :) This I suppose is the most unobstructive and simple to assemble solution. Just clip it on the front frame, either from front or from…
Hello. These are gravitrax height spacers based on original ones - grey and black = 1 height and half height. My design is built to be easy and quick to print with minimal material usage (more so if you also turn off top layers ans set…
Hello. I got a spare battery for my TRX-4M and wanted it to carry easily everywhere the car goes. So the best of course is to have it travel on car. For this occasion I designed this travel case that looks like a wooden crate to store the…
Hello. On Trx 2WD models (I got Bandit) the motor hangs out so uncovered, so I tried to model some cage or bumper to cover and protect it. I like how this turned out. Already tried bashing with it, sustained even a crash :O Its around…
Hello there. Made another part for TRX-4M K10 - front and rear bumper. They come with EU plate size area as well as areas for D-rings (I have just my own, so the fitment may not be OK, if you need, let me know the details and I will…
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
This is the simple sparewheel mount for 7mm hex wheel (trx4m standard), that mounts into front sidewalls openings on the trailer. Wheel is secured by 2,5mm screw (as original trx-4m rear sparewheel) S.D.G.
Hello. For quite some time I liked the cab frame of TRX4 Sport. When I got my K10 I played with idea to recreate something like that. And this is the first outcome. It got mounting positions for stock Trx Defender fueltanks + holders for…
For sake of weight distribution I designed this roof rack sparewheel mount, so that there is a bit more weight on front of the Defender, with the sparewheel not being on the back, but here on this frame. This clips easily on the Defender…
I made this model as a visual help to connect me stronger with the meaning of Easter. For some it may be just the decoration, but I really made this with that mindset. Anyways, anyone who wishes to print it, the second picture shows which…
Hello. This is a simple and easy to print garage kit for 1:64 cars. 4 walls (2x"bok", "zad", "celo") snap together and then press fit to the base ("zakladna"). Garage door ("brana") is openable - assembly is a bit trickier but thanks to…
I lost the sleeve that came with Prusa spring pliers, so I designed similar small sleeve to hold them closed. I printed it from PLA, orientation as per photo, with brim. It printed nicely and it works well.
This is the low height side stake panel for trx-4m trailer to accompany rest of side panels I made. I needed the place to attach the rubber bands which hold the cargo in place, and the original side stakes are too high, while using just…
Zdravim. Toto sú náhradné diely pre hračku KDN š 1203, ktoré som vytvoril počas reštavrácie vraku. Mnoho vecí chýbalo, bolo zničených. Vďaka 3D tlači ale hračka dostala druhý život :) Nachádza sa tu: predný nárazník (2x v prípade…
Hello. Here is a trailer lift for TRX-4M as already been seen and done, this one however is a bit more heavy-duty shaped around axis. First version is regular, for use with standard trailer wheel and screw. You need to provide another set…
For some reason I didnt find the LCD that could fit my ideal vision, and because of that, as often happens, I designed it myself. Its a play on standard Prusa design, the “wings” are inverted (wider on top) and the whole knob is taller.…
Bezpečnostná krytka zásuvky EU. Dizajnovaná podľa predajného “originálu”. Pasuje štandardný kľúč. Čelná plocha je plochá aby sa dala ľahko tlačiť. sdg
This is the low height rear stake panel for trx-4m trailer. It has the place for license plate as well. The dimensions fit with sparewheel mount I also designed. S.D.G.
Hello. I got myself HotWheels F1 cars and wanted to display some. So I designed this simple stand. It is slanted so that the car is better visible Print-wise it is designed already with 2 perimeters and with no need for supports. Thank…
Hello. This is a jig that bends wires into handle shapes for use in scale modelling. I got inspiration from such existing jigs, but mine is 2 in 1, where you can create 3mm and 5mm wide handles, with a lot of handle heights to choose…
Toto je vylepšený skrutkovač pre Revell Junior Kit (konkrétne 00813 - roadster tuning), ale tipujem že to pasuje aj na ostatné Junior Kit. Dizajnovo je čo najviac podobný originálu - čiapočka rukoväte pasuje pôvodná. Je však vylepšený o…
I didnt like how the trailer hitch ball is exposed when not using a trailer. So I designed a cover, which ads a function and a tiny bit of realism to the TRX-4M car :) Inside, there is a small clip that locks the cover just under the…
Oproti originálu pridané, resp. odobrané logá HC Košice na obidvoch stranách. Prioritné použitie ako dekorácia. S.D.G.
I found a model I did of my Pro-Ject Elemental Phono USB record player form back in the day. I used it when I was planning my living room furniture :) Enjoy. sdg
While watching initialD I created this model of Takumi 86 steering wheel for my kids to play (running around house with this) Model has a hub, if someone maybe wants to use it in a car model kit or similar. But I printed it just flat…
Hi. I present a very specific and glorious :D AAWireless Two holder for Toyota Aygo 12V socket (cigarette lighter) As the cable is somehow short, the device does not have a neat place in the console. So I designed this holder which gives…
Pridávam sem diely na hračku IGRA bugina, ktoré som vyrobil už dávno keď som túto hračku znovu objavil medzi vecami. Motor, rám so svetlami, volant, predný disk a pneu, naťahovacia páčka Motor je dvojdielny (originál bol asi jednodielny)…
Dostal som dopyt na takéto odznaky, tak som ich nakreslil a vytlačil viacfarebne manuálnym spôsobom. Na stiahnutie prikladám 3mf projekty, kde už sú nastavené výšky pre zmeny farieb - nezabudnite si ale zmeniť svoj typ tlačiarne,…
After Golgota, there comes an open grave on the third day. So, what I maybe should have done earlier, I did now. I printed it with zero infill and 2 perimeters. I tried to model it so that it does not need any supports, however, near the…
Kryt lanka ručnej brzdy Zetor 3011 / 4011. Neobsahuje dodatočný menší vrchný kryt. Na foto je prvomodel, priložený súbor má spevnený spodný úchyt. s.d.g.
There was an empty space behind the cab, it asked for something, and the fuel tank is the best solution. Tank is held on 2 mounts - left is smaller, and right is extended as there is also exhaust muffler that tank has to avoid. Mounts are…
As I replaced my TQ steering wheel with a thumbsteering, I had a leftover wheel. So I designed this stand, but with interchangeable mounting inserts so that you can display not only a TQ wheel but also a car wheel with 7mm or 12mm hex.…
Slovenská EČV nový typ v mierke 1/10 pre vaše RC vozidlá. Model je bez textu, ten si ľahko pridáte v Sliceri. Keďže originálne písmo nieje dostupné, ja som použil iné, viď foto. Následne nastavte výmenu materiálu vo výške 0,6 a 0,8 -…
Front battery tray for GRE24 for better weight distribution. The tray is higher to fit 2 batteries, it snaps onto body posts via the power of will, but can be secured by a screw. I find it unnecessary as with body on, it is fully held in…
Hi. I modelled the rim of my GRE24 crawler, primarily to have dimensions for wheel weight, but ultimately modelled it all to be able to create also other styles of rim front So here is the stock rim as well as two “aftermarket” rim…
Very specific model here - Safety nut lock for Injora 4mm nuts that come with long hex extenders. These nuts have extreme tendency to loosen until whole wheel falls off. At least thats what is happening on my K10 with stock rims. So I had…
This is the carrier / holder for a Prusa spoolholder arm included in latest printers (I used MK4 leftover arm). Carrier is built to fit Rexroth 4040 profile slot - with a slot nut and M8 screw DIN7991
Hello. This is the sparewheel holding nut for RGT Crusher. It is made to look like some reallife easy-release nuts. Easy to print w/o supports and it screws directly on the sparewheel screw. S.D.G.
This is the washing machine drum specifically created for a project made from Spike Prime set. It is a custom project, not part of any lesson. If you like the idea, let me know and I can share more build photos etc.. Thank you S.D.G.
Hello. This is a knob from Tesla Tenor. I created two version. One model (...farbenie) is meant to have center part painted with color to simulate metal insert. Other model (...plech) is meant to have the metal sheet inserted as on…
Stredová krytka kolesa z kočíka pre bábiky, asi prelom 80. / 90. roky. Typ ako na foto
Custom RGT Crusher battery tray for Trx 7-cell NiMH. Mounted via 2 screws into existing features on the car. It makes the CoG a bit higher, but needed to be done as trx battery wont fit corrrectly installed sideways as original battery…
Hello. This is my interpretation of a Fujifilm Instax photo stands. Available for all Instax sizes: Mini, Square, Wide. And in 2 angles: 90= upright (eg. when photo is on top of a shelf); 100=tilted backwards 10° (eg. when photo is right…
Hello. I designed this short sport exhaust for RGT Crusher because, when using my fuel tank, exhaust muffler now sits lower. So the stock long exhaust wouldnt fit. This, I believe is a nice solution. S.D.G.
Here is the mount / holder for LED lightbar RGT-P860084 for mounting on the RGT Crusher rollbar. Use 2 screws to secure the lightbar into the mount, and the mount just clicks on the rollbar. I already did 2 expedition with it, got rolled…
Ahojte. Možno poznáte, pamätáte si na rozprávku Najmenší hrdinovia (1985) s postavičkami z drevenej stavebnice od Kolomana Lešša. Ja som ju po rokoch znova objavil, tak som skúsil postavičky zhmotniť. Môžu byť využité napríklad ako stojan…
Chassis cover for when you remove the stock battery housing, so that there wont stay the big emptiness where dirt can enter. s.d.g.
Hi. Latest HW premium F1 cars dont fit into standard "suitcase" car case. I modelled an enlarged version to fit them, but so that it still fits - connects - with the original cases, albeit only in vertical direction - understandably so as…
To wszystkie aktualnie dostępne wyniki.
