Liczymy pasujące modele…
🔩 ISO 2338 Parallel Pins – Precision Alignment Dowel Pins A set of non-threaded, cylindrical alignment pins based on the ISO 2338 standard. Perfect for precisely locating and assembling mechanical parts like housings, molds, jigs, and…
Dies for Philips Pasta Maker Viva HR2333 I have created dies for making different pasta shapes: pappardelle, spaghetti alla chitarra, spirali, tagliatelle, vermicelli. I put the source in CadQuery in case you want to make your own…
I bought an inexpensive Chinese airbrush (Master Airbrush G233) to replace a dead Paasche. I didn't find a holder or hanger that would fit so I made these. After some trial and error I was happy with the results. Print Settings Printer:…
🧱Lego Duplo Plate 2x6 #98233🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
Remix of the following model. https://www.printables.com/model/401147-ballenzange-round-bale-handler-replacement-bruder- But modified the existing left side(minor fillets) and additionally modelled the right side too.
This model is compatible with the lego system.
I bought this Arducam 5MP Wide Angle USB UB0233 camera on Amazon, to try out with OctoPrint. I had it wired up with twist ties. I couldn't find a mount specific for it, so I figured I'd make one. There's a Logitech C270 style connector…
This model is compatible with the lego system.
just my remix of thing:4515921. made it hold 3 airbrushes and made it fit on my anycubic photon mono 4k
This model is compatible with the lego system.
Designed fot the Philips HR2333 Viva Pastamaker. It should be possible to prepare pasta with the shape of cats. I haven't tried it yet, so let me know if it works! ✌ My print configuration: - ABS - Fill 40%
This model is compatible with the lego system.
PETG Layer 0.2 Fill 100%
This model is compatible with the lego system.
My toodler broke the orginal one two times… this time I replace the broken side with a 3d printet one. I design the points where it was destroyed a littel bit stronger. have fun
Gridfinity - Craftsman Midget Wrenches 942339 - Metric
The new Phillips pasta maker is really great but it doesn't have the same amount of disks you can have from the others, so I decided to make my own. I found something on Thingiverse, but it fits tight and it is only STL while I like…
This model is compatible with the lego system.
Due to the lack of access to technical data, I have scanned the front lamp for Romet 2330-2350. The scan is not perfect, so I've decided aslo to create a housing model in Fusion 360. The housing has not been tested on the motorcycle yet,…
For a fellow railway modeler I've designed and printed G-scale number plates for a Nederlandse Spoorwegen 2200 series diesel locomotive. Number 2233 is preserved at the "Veluwse Stoomtrein Maatschappij" in the initial red/brown color…
These are clipper guard holders for Moser 1170 1230 1233 1234 1400 1853 1854 1855 1870 1871 1872 1873 1881 1884 trimmers/clippers The guards originally came loose in a bag making it difficult to find the specific size needed. These…
Lego Wheel inspired by piece 6423381 The tolerances for the tire are correct, on the middle might be a bit loose when putting on an axel Fits LEGO 62.4x20 tire size.
Replacement TV leg for Vizio TV. The numbers on the leg are P34T2335 and XLC01C0100 for a circa 2015 model. Three options Original 30 degree offset Straight Just the connector to add to your own print I printed upright with supports to…
Brackets to mount the Noma 78233 power bar to a workbench or under a desk. Category: Organization
The classic pentomino puzzle: all twelve ways of joining five squares, each with its letter engraved, and a 6 x 10 tray to fill. There are 2,339 different solutions, and finding even one keeps most people busy for ages. When you've…
Taking inspiration from the engineering consoles from the Starfield game I've created a case to house the official Raspberry PI touchscreen case, with space for a raspberry pi to be mounted behind. Model comes with VESA mounting option or…
Prusa XL Purge Tray @ MKE Gadgets #233 In this video I show a purge tray for a Pusha XLPrinter. This tray catches the filament that is purged at the beginning of your print. Keeping your printer a bit cleaner. Print one tray and two sides…
Modèles avec vis ou aiment. Aiment : 6x3mm 4x Impression : Couche : 0.2 Remplissage : 15% Supports : oui
The standard door latch has 2 locking positions (technically 3 positions total): Locking the door tightly closed Locking the door open slightly cracked Floating, unable to close at all This modification adds a third locking position for a…
Here is my Ikea skala holder for my crenova multimeter. This will probably not work for most multimeters since the mounting works through this round whatever on the back of the multimeter but it worked perfectly for me.
GM/Opel 90503110 Knob Trunk Box Right 2336971 Vectra B This is the part that closes the lateral lid, inside the trunk, where tools (Jack, Safety triangle and Lug wrench) are hidden. Could not find a new one to buy, so I designed and…
Taking inspiration from the engineering consoles from the Starfield game I've created a case to house the official Raspberry PI touchscreen case, with space for a raspberry pi to be mounted behind. This is a revision of my original model…
This wall-mounted Cabinet of Curiosities shelf is designed for displaying fossils, crystals, minerals, small collectibles, and curated objects. The 233mm square footprint makes it ideal for mid-size build plates while maximizing display…
LEGO DUPLO-compatible Plate 2x6 Design ID: 98233 Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 % Support: no I am looking forward to your Makes! :-) If you like this design, feel…
Soporte para colgar los difusores de pelo. el diametro interior es de 59, aprox todos son parecidos, en todo caso medirlo y aplicar la escala si fuera otro diametro. esta laminado con ideamaker con la funcion de textura Print Settings…
The following print file represents a replacement part for the Krups F233 Ovomat egg cooker, specifically the egg tray. To ensure optimal printing results, it is recommended to use a temperature-insensitive filament like PAHT-CF It has a…
It helps to better suction and function of nose aspirator. It's working without lock via air suction. I've changed the outer diameter. So now it works for variety of old replacements of the old ETA vacuum cleaner.
Keysight U123xA Mod / Repair range selector
Recommended to print in PA6-GF or PAHT-CF with 100% infill.Recommended to print in PA6-GF or PAHT-CF with 100% infill. The glue the bold with cyanolite.
tube extension for Ice Maker Outlet Box
Der "sicherungspin" (Olivgrün) wird eiegentlich nicht benötigt, hält auch so ohne probleme. Verbaut sind die Clips neben dem Fabia (2000-2015) auch im Octavia (2009-2013) und Roomster (2006-2015)
The (ancient) Acer H233H monitor's power button is supported only by a flimsy plastic hinge that has a tendency to break. This bracket replaces that hinge mechanism to support the external power button in the proper orientation so it can…
Needs supports touching the build plate. Wheels need to be glued in. Infill and resolution is whatever you are comfortable with.
Din mount for the Pokeys57CNC board. Two sizes, 97 mm and 102 mm.
This is the bilge pusher for a solo sprayer (I believe part number 40-74-233). Print Settings Printer Brand: Formlabs Printer: Formlabs Form 2 Rafts: No Supports: No Resolution: 100 Infill: 38 Filament: Formlabs Grey Pro Grey Notes: The…
TL;DR Instructions: Print the 'Tape-Ready' version. Make sure you have double-sided electronics tape on hand! This print is overall 0.2mm thick. Be careful when removing it from the printbed, you could easily tear or snap it! The saucy…
I needed a box that holds 60 rounds as a box holds 20 rounds from the shop
ARTE&DISIGN GT233 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
This is a Gridfinity-compatible holder designed specifically for the Mastech MS8233A multimeter. The model comes in two sizes: 2.5 × 4 (custom size for my Gridfinity layout) 3 × 4 (standard) The holder is designed to store the multimeter…
I recently bought this budget portable fan for this summer and wanted to use it while I'm sitting on my desk without using my hand, so I designed this stand for it. I put 7 spots on the bottom for anti-slip bumpers. After printing and…
Successful installation when printed using 95A TPU with 1 wall loop, 3 top and 3 bottom shell layers.
Mastech MS8233B-CE15 hanger for 2020 square tube 3 zip ties needed Zip ties are not that easy to insert, but it works
ORGANIZZATORE GT233 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
Attachment for ETA Fenix 1233 90000 / ETA Fenix 2233 90000 ANTI SQUEAKY !!! ANTI DAMAGE NO SUPPORTS FACE UPWARDS
A replacement foot pedal for the Hoover Windtunnel vacuum. You'll need the metal plate from the original one. Foot pedal assembly Hoover WindTunnel UH70120 Hoover T2 304233001 You'll likely want to print this upside down. Tested on Oct…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.233…
The mount screws on to the removable gantry wheel on the left side. Requires: 1x M6x20 bolt (any will work, just pick one up from Home Depot/Bunnings) Make sure you don't overtighten the two M3 screws! The mount is fragile and will break.…
Customized version of https://www.thingiverse.com/thing:1038261 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1038261 Instructions Using the following options: wholeMessage = und/ zScale = 35 xTranslate…
Customized version of https://www.thingiverse.com/thing:1038261 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1038261 Instructions Using the following options: wholeMessage = bar/ zScale = 35 xTranslate…
Customized version of https://www.thingiverse.com/thing:1038261 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1038261 Instructions Using the following options: wholeMessage = candy/ zScale = 35…
This is a simple and effective mount that can fit a Crenova MS8233D Multimeter and can be modified to fit onto any surface
You need 2 M2 bolts (skirted to be flush) and 2 M2 metal threaded inserts (see the picture). I printed these models on their sides using a Core ONE. This helps the appearance of the slider top. Note that you will need to set the slider…
Parametric 7.8cm tall object with rounded circular geometry and a weave pattern. Engineered for precise 3D printing.
The Lifemax 1233 talking clock is supposed to be suitable for visually-impaired people. Unfortunately, the design makes it anything but. The central button that you press to get it to tell the time is surrounded by five larger buttons to…
A frontpanel for the PT2339 karaoke reverb frontpanel. Two versions. One with a lip and one simple frontpanel. Text was manually added in orcaslicer and is not included. Depending on print settings the mic input separator might need to be…
Replacement part to hold te lid to the bin
🔩 ISO 2338 Parallel Pins – Precision Alignment Dowel Pins A set of non-threaded, cylindrical alignment pins based on the ISO 2338 standard. Perfect for precisely locating and assembling mechanical parts like housings, molds, jigs, and…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This is a Gridfinity-compatible holder designed specifically for the Mastech MS8233A multimeter. The model comes in two sizes: 2.5 × 4 (custom size for my Gridfinity layout) 3 × 4 (standard) The holder is designed to store the multimeter…
This wall-mounted Cabinet of Curiosities shelf is designed for displaying fossils, crystals, minerals, small collectibles, and curated objects. The 233mm square footprint makes it ideal for mid-size build plates while maximizing display…
Der "sicherungspin" (Olivgrün) wird eiegentlich nicht benötigt, hält auch so ohne probleme. Verbaut sind die Clips neben dem Fabia (2000-2015) auch im Octavia (2009-2013) und Roomster (2006-2015)
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
