Liczymy pasujące modele…
A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…
This model is compatible with the lego system.
free 3D LEGO beam 3 ;)
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Very simple design: this jig allows to bend quickly and repeatedly diodes for the Redox keyboard PCB. Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 150µm…
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
This model is compatible with the lego system.
This model is compatible with the lego system.
A wall mount for the BOSCH 12V Max BAT414/GBA12V30 battery (https://www.amazon.com/Bosch-12V-Lithium-Ion-Battery-GBA12V30/dp/B079NWHSCS ). I've also designed a Slat Wall plate for this mount:…
Tire 24mm D. x 7mm Offset Tread - Band Around Center of Tread : Part 61254 | BrickLink Printed in TPU/FLEX
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a remix of Saunick's Twilight Imperium 4th Edition (TI4) war sun unit for FDM printing. https://www.thingiverse.com/thing:4191414 I found that the original model was too small for durable, usable fdm prints so I made an effort to…
This model is compatible with the lego system.
HPI Baja 5B #854617 (SS) #854147(RTR)
Outside nubs are printed separately to avoid printing supports. The nub on the outside should be press fit into the handle.
this is used with the open inserts. important printing setting: support; yes tree
wago 221 414 mounts for voron0 3d printer 15x15 (EXTRUSIONS)
Stihl ersatzhülse - 41407917207 Passend für Gerät:FR85T, FR130T, FR131T, FR410C, FR460TC, FS55C, FS55R, FS55RC, FS55T,
Simple a DIN rail mount for the PCT-41x (412, 413, 414, 415) WAGO Style Lever-Nut from AliExpress. I have found these to be a good lever-nut. Thanks to yahbluez for the original design and concept
Bosch MUM9 clutch - 10004141
Works with P-84311 Makstor nr.3-4 P-84327 Makstor nr.3-12 P-84349 Makstor nr.4-5
This is a very simple model, but useful for me, because I like to leave my main microphones set up at all times. I do want to protect them from dust, so instead of a plastic bag, I think these covers look pretty classy and do the job. The…
Wanted a bender that would work with diodes that come attached to a tape reel. I just adjusted the spacing of Flehrads bender. Im not sure how standardised the spacing on the tapes is so i provided a smaller tester piece you can use to…
My Dell monitor U2414H has a very narrow bezel and the webcam will cover a fraction of a screen - a particularly important fraction with all your browser tabs. So I've designed a "spacer " to solve this problem. There are 3 versions:…
NON-Wago 221 PD (No Mount Base 414)
Filament: Atomic Meltmiser Layers: 0.20 mm Infill: 5% Supports: no Original PRUSA Mk2S
Insert for replace original mold for Jonnesway S29H4140S bits set.
A simple holder for the YETI Rambler 14oz version. Fits in the middle of the cup holder of the Skoda Fabia Mk2 (2007-2014). Print instructions: Lay flat upside down (big side down) Has to be printed with supports Settings: 0.15mm PETG…
Neck holder DJ61-60114A for Samsung SC4142 vacuum cleaner and holding clip. Internal infill for the clip was made 100% to increase strength.
Part 1341416 Drive Connection Link for a Delta 40-150 Scroll Saw. The drive link is unavailable to order, so I designed a replacement. I'd recommend using an engineering grade filament, since this part is under a constant load, directly…
ORGANIZZATORE GT414 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
A NAVTEX (NAVigational TEleX) is an international automated direct-printing service (working in medium frequency) for delivery of navigational and meteorological warnings and forecasts, as well as urgent maritime safety messages to ships.…
Denna modell ersätter den plastbussning som sitter i (bland annat) ASSA's 414-låshus. Bussningen verkar inte finnas som reservdel, och jag var inte så sugen på att köpa ett helt nytt låshus, därför designade jag denna, med en trasig…
Jedná se o díly, které zvýší prostor v KLT.
This model was remixed from https://www.printables.com/en/model/320676-webcam-spacer-for-dell-monitor-u2414h https://www.printables.com/@Smoluch did a great job with the fitment for his Webcam spacer. Now you can print these to create…
Wall Mount Bracket For HP L41423-013 which is being used to power a HP Universal Dock G2 2 need to be printed to mount the PSU sideways although you might only need to print one to hold it vertically. The screw holes were designed for…
Werkzeugablage für Eufab 16414 Fahrrad Montageständer zum aufklipsen auf den montageständer .
Offenhalter für das Eisfachs eines Thetford N4142E+ im Wohnwagen oder Wohnmobil. Die Lüftungsstellung der Tür kann weiter benutzt werden 👍
Bread Knife Sheath Profile: 0.20mm STRUCTURAL Infill: 15% Supports: no PRUSA Core One Filament: Atomic Neon Yellow PLA
Relpacement bezel pieces in case the old ones are damaged. I printed them in black PETG with. 0.05mm layer height and attached with epoxy
I made this while i was working on a little project of mine, thought it might be useful to someone. As for size I relied mainly on the datasheet but some measurements had to be done by hand with a caliper.
This model has additional filter centering ring, and because i printed mine from abs, i was able to weld all parts together with acetone/mek. But if you use the filter you can use original base, but i attached the extra parts and there is…
This is a holder for my Makita DC1414T charger to mount to SKADIS board. It uses the great skandisnut system: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
Sheath for my Wüsthof Classic 20cm Serrated Kitchen Knife. Product number is 4149. Customized version of http://www.thingiverse.com/thing:125109 Instructions Using the following options: knife_width = 24 knife_length = 195 knife_thickness…
This is the water drain container for a thetford fridge. Thetford part no. 691885 Auffangbehälter - Thetford Ersatzteil Nr. 691885 - für Thetford Kühlschränke N3141/N3142 & N4141/N4142 The print was produced using ASA Prusament in white…
Useful for verifying that the load cell fits in your application before purchase/delivery.
Hammer faces to suit 414 & 714 Printing Print in TPU 85% infill 5 walls, top and bottom
KTM Lichthalter für Scheinwerfer Teilenummer // Part No. 58414010100 Einbaurichtung Pfeil nach oben // Assembly Arrow upwards
As a commercial plumber, I ran in to an issue of how to mount this pump. I designed this bracket to be wall mounted using ¼" toggle bolts. the bolt head is recessed in the bracket to make a clean flush mount surface for the pump. It fits…
Simple mini case for Microchip MPLABXpress Evaluation Board: https://www.microchip.com/mplab/mplab-xpress I don't want to have "smoke signals" from board because of tweezers laying behind the board on my desk :-) Print Settings Printer:…
Hey there, I made this clipper guard for my Orava VS-414, because I wanted to cut my hair slightly longer than what the four original ones allow. Works rather well even though the model would benefit from some more refinement, hair length…
Just print, screw and this done Print with a ELEGOO CENTAURI CARBON 2 with 15% PLA fill
Modern style crash plates for https://www.thingiverse.com/thing:5141482 slips over end of the M One in set has increased detail but may be harder to print *new files to fix connectivity issue of 4/25 AM download Category: Hobby
suporte original tem apenas 4 fiz um que suportasse os 6 que vem junto da maquina
Spiral Lamp Base for IKEA LED2414G2 A modern 3D printable lamp base with a unique spiral design, made for the IKEA LED2414G2 bulb. The open spiral structure gives the lamp a distinctive look while creating a warm and cozy atmosphere.…
Lego 11211 52107 30414 22885 80796 67329 4595 15573 87580 34103 65509 86876 4590 4596
I like the knob by ep.shapes but my fryer has a slightly different shaft on the timer. Mine was sold as "Avalon Bay" with a 3.7 Quart bucket. The shaft is a straight rod (orange) with a roll pin (purple) through the side. I've left the…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Modern style crash plates for https://www.thingiverse.com/thing:5141482 slips over end of the M One in set has increased detail but may be harder to print *new files to fix connectivity issue of 4/25 AM download Category: Hobby
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
![Twilight Imperium War Sun Unit for FDM [thing:4191414 remix]](https://media.printables.com/media/prints/324342/images/2796301_47c38599-b315-4cbc-af3d-71be66029c34/pxl_20221124_212122224portrait.jpg)
