Captain Jack Sparrow
Captain Jack Sparrow
Wydruk około 19,15 €–23,41 € nettoWstępna wycena jednego wariantu
- Pobrania
- 3030
- Polubienia
- 663
- Ocena
- 4,5
2623 modeli
Captain Jack Sparrow
Wydruk około 19,15 €–23,41 € nettoWstępna wycena jednego wariantu
Bring nature to your 3D printing collection with this highly detailed, realistic 3D model of a sparrow! Designed with precision and printed using the Elegoo Neptune 4 Pro, this lifelike bird features intricate feather textures and a…
Wydruk około 2,96 €–3,61 € nettoWstępna wycena jednego wariantu
Sculpted model of a parrot. Available in single color or multicolor print with colorchanges. All my models are free to download and remix. If you appreciate them, please leave a download and a like!
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Greenhouse with special Carrots Mini greenhouse: A special money gift idea. The base is 150 mm long with a width of 120 mm, the total height to the roof is 130 mm. I built this little greenhouse for my girlfriend's birthday because she…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is especially designed for Tropicana © juice bottles and allows you to recycle them into a good size watering can for your seedlings or indoor plants. The whole thing can be printed in PLA, but for a better seal, I recommend…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Dead Parrot and Cage adaption from Monty Python and Flying Circus. Took some artistic license with the cage.
Wydruk około 22,02 €–26,92 € nettoWstępna wycena jednego wariantu
This is for use with the Nintendo Switch game called Mario Kart Live Home Circuit. This is sliced for an MK3S with an MMU. Print instructions This is designed for a MMU to print. If not using the GCODE, load the base first. Then click on…
Wydruk około 12,65 €–15,47 € nettoWstępna wycena jednego wariantu
The Arrow of Light is the highest rank in Cub Scouting. Packs may hold a special ceremony to honor the Cub Scouts who have earned their Arrow of Light rank. The Arrow of Light is also the only Cub Scout badge that can be worn on the…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
This parrot figurine captures the elegance and vibrant feathers of tropical birds. Ideal for exotic displays, bird-themed collections, or kids’ projects. Printing : Compatible with FDM and resin printers Supports : Needed under wings,…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Hello, Today I have a Headband with an Arrow in 2 versions for you. One version is in the photos, it's the classic version. Then there's the BIG version, which is a larger version. It's good to put it on a child's head so that they don't…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
a simple fan duct designed for 120mm computer fans. This housing allows for ventilation through narrow slot type windows often found in high rise buildings. This is a great tool for removing smoke or fumes in a building with slot type…
Wydruk około 11,29 €–13,80 € nettoWstępna wycena jednego wariantu
Just some tiny utensils for finger foods, and cocktails, just in time for valentines day. Made in TinkerCad, enjoy!
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
I used PLA, no brim (nor support).
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Contenedor, Tarro, bote
Wydruk około 3,23 €–3,95 € nettoWstępna wycena jednego wariantu
I found that the sliding arrow would slide and fall off with the original version, so I reduced the gaps to 0.1mm to prevent this. Be sure to print the arrow upright on its side as shown in the photo.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Love is the most fragile balance in life. They often depend on a thread and must be treated with great care so that it does not break. Printing with 2 perimeters gives good results. I recommend using supports as seen in the image. I…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Eine Radnabenabdeckung für Felgen mit 56 mm Lochkreis mit dem geflügelten Skoda Pfeil. Die Druckvorlage wurde aus zwei Körpern erstellt, damit eine entsprechende Farbzuordnung für Mehrfarbendrucker erfolgen kann. A wheel hub cap for rims…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
To easily transport your beer cans from the fridge to the garden or terrace. This template is suitable for certain narrow-diameter cans (57 mm or 2"1/4) with a capacity of 250 ml or more. (For larger cans with a diameter of 66 mm - 2"…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pivoting wheelbarrow handles for easier handling. Fits as replacement of handles with inner diameter 32.3mm but can be adjusted. You will need M8 screw with locknut for assembly. My first try, printed in PETG, 0.25 layer, 25% gyroid…
Wydruk około 16,50 €–20,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN ( FR ) en dessous The Horl holder on the “cruise 2” model does not allow small blades to be sharpened. I therefore propose this model for sharpening both narrow and wide blades. 4 modifications compared to the original holder: 1- More…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Can be scaled to a various sizes to create a whole sparrow family. There is a “whole” version with all the parts together if you are printing as a scale where the individual parts are too small. Papa: Width: 9.3 cm Depth: 11.5 cm Height…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Adapter to mount an Arrow dual-band antenna on a Discovery Drive azimuth/elevation rotor. The handle of the Arrow goes in the slot, and the base plate bolts to the Discovery Drive's rotor plate. I used a prototype Discovery Drive with…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
This bracelet achieves flexibility by using two opposing cones to achieve flexibility. The clearance between parts is 0.38 mm. The sunflower attached to the bracelet is provided in a separate Printables.com file. The bracelet is 7.24 mm…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
These are 3D-printable narrow eyes , designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes have a simple, round and narrow design , intended as a clean and minimal alternative to larger eye models.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
2 parrots picture processed in HueForge 2.0
Wydruk około 6,57 €–8,03 € nettoWstępna wycena jednego wariantu
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
30mm carrosserie ring met een 5mm gat in het midden. ik heb dit gebruikt bij een zeil vast te maken op hout
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser schraubbare Trichter wurde entwickelt, um das Befüllen des Teefilters der Naqula‑Thermoskanne mit losem Tee deutlich zu erleichtern. Der originale Filter besitzt einen Durchmesser von rund 30 mm, was das Einfüllen oft mühsam macht.…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gardening just got fun with this cute little carrot patch 🥕🥕 Plant it on your desk, coffee table or anywhere else that needs a little touch of spring. I have included the following digital files: (1) Big Carrot (2) Small Carrot (3) Bed of…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
Don't forget to give me a like 🧡 Share photos of your prints 🥕 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬 I made two versions - with eyes and without 👀. The carrot top prints separately. It has a small…
A cute low poly parrot. Easy to print without supports. Includes 8 multicolor variants as 3mf files with 3-6 different colors: 3 colors: Cockatoo (V1), Blue Macaw (V5) 4 colors: Green Parakeet (V2), Blue-Yellow Macaw (V6), Gray Parrot…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster On the base I've used support from the build plate only. For the Jack I suggest that you add the support under some of the dreads on the back and,…
In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다
It's a carrot that's also a container. Why? Because carrot. Print without support. Scalable up to %200 without issues.
Elevate your archery experience with this exceptional 3D printed bow model, designed for both safety and precision. Crafted for the creative DIY enthusiast, this project allows you to explore three different arrow options, catering to…
Updates 7/12/2025 - Added a labelled rack which allows space for a label in the front of each rack. 10/12/25 - Added rack dividers to the model to allow for items to be separated within each rack, with options for a half, third, or…
Just a simple door arrow for downloading and modifying. Enjoy
I reimagined Michelangelo's David through a 3D project, complemented by a column with an Ionic-style capital serving as its base. This endeavor aimed to enhance the presentation and aesthetic appeal of the iconic sculpture. In…
East to print: 4 x Legs 1 x Body (Printed upright, use brim if needed) 1 x Head No supports needed. Simply glue the legs into the body.
Nice collapsible carrot which can be magically pulled from your hand. Or from a combination safe lock box or from an egg shell . Prints mostly in place, just the carrot tip have to be inserted into the collapsed carrot body and pushed…
— Handle With Care --- Introduction: Discover the thrill of launching matches with precision using my innovative 3D printed matchstick shooter. Crafted for safety and excitement, this print-in-place model guarantees endless fun for…
Left Pointing Arrow Illusion This is a model of an object that gives the illusion of an arrow that is always pointing to the left. Turn it 180 degrees so that you're looking at it from the opposite side and it's still pointing to the…
Ender 3 S1 Extruder Arrow, Print in a bright/different colour to black so its easy seen. I printed 0.2 layer height with Cura 5, added a chamfer to help push it on. Its quite a snug/tight fit but I have tried it on both my Ender 3 S1…
a stand arrow i made when i got bored
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
Model of an arrow from Minecraft Model is split into parts so it can be printed with multiple colors There is a regular tip and two version of the magnetic tip You'll need two 5x3mm or one 8x3mm neodymium magnet
Hey it's the green bird from Minecraft. You'll need 5 colors (Green, Black, Dark Grey, White, and Light Brown), and each color prints separately. You shouldn't need superglue (🤮) to assemble the bird. Printing should be straightforward.…
This is the requiem arrow from Jojo's Bizarre Adventure Part 5: Golden Wind used by Giorno Giovanna
The CF-105 Arrow was a supersonic interceptor developed in the 1950s. I love this beautiful plane and I felt a need to model it, despite having no idea how to model such complex shapes. Please read on to learn some history and to learn…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
I think the Sharrow MX-1 is pretty cool looking and if it lives up to the hype perhaps a new standard in marine propellers. Print Settings Printer Brand: Creality Rafts: No Supports: Doesn't Matter Category: Hobby
A small remix of the original design to move the arrows to the top of the counter, making it easier for other players to read from across the table.
Intended for use as a snowman's nose. Looks realistic when the notches are colored with pencil. As seen in the photo.
9-4-22 Added the seperate files for each individual piece. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 38 Filament: PolyMaker PETG Category: Props
double garden hose connection - raccord double tuyau d'arrosage type gardena Paramètres d'impression 3D, printing setting petg - layer 0.15 - bed 85°C - nozzle 240°C
3D scan of a taxidermized specimen of a Cuban Macaw, or Tricolored Macaw (Ara tricolor), created by the Natural History Museum of Vienna under license CC Attribution-NonCommercial . This parrot species was native to Cuba and the…
Please add a “like” if you found this model helpful. I love earning some prusmeters :) Remixed to narrow the depth to 100mm, so it fits behind the printer when pushed up against the wall with the external spool holder attached. I included…
Sometimes on our archery practice the nocks jump from the arrow when hitting the target. I usually can't seem to find them nowhere, so i decided to design my on nocks to print them when i lose one. From the safety point It's always better…
The Piper PA-28 series is a family of single engine, low wing, four seat aircraft. PA-28's were first introduced in the 1960's, with the Piper Cherokee. It had a square wing with fixed tricycle undercarriage, and was available with…
These are tools for scraping out small spaces or scraping small detail on surfaces… like your 3D prints. There are two types in each size. On one, instead of a small curve, it will have a straight end. CAUTION These tools have VERY SHARP…
Captain Jack Sparrow from Pirates of the Caribbean with base.
Bring some tropical cuteness to your collection with Pico! This chubby little parrot is easy to print, full of character, and ready to brighten up your desk, shelf. ✔ Monocolor and Multicolor versions included ✔ Fast print, optimized for…
Another TikTok knife I wanted in my collection ;) 努力做宝宝 (@_1023625) did a great job with this model. Since I didn't have flathead screws I adopted the model to regular ISO hex cap screws (M3 10-12). Also, I made the blade a tiny bit…
This is a Mobius strip with an arrow which can travel around to show you that the Mobius strip is a nonorientable surface. When the arrow comes back to the original location, it's flipped! Read more about (non)-orientable surfaces on…
Real Looking Heart with piercing arrow. Two Versions. Blank (add your own inscription) = Arrowheart. “I love You” = Lovearrowheart. 2/6/2023: Added heartthickerarrowend. stl if you plan on reducing the size.
Realistic regent parrot figurine. The model features detailed feather texturing along the model. I recommend printing it at a finer layer height or with an SLA printer. The files are pretty large, they may take a while to load. I sculpted…
Simple arrow clip/holder used for bow case to give extra arrow storage, can also be used for wall mounts, cabinets, and bow-racks, designed for arrows with a 6-8mm diameter.. Not My Design, I remix this from…
A make of the iconic nose of Olaf, ready to be used for your snowmen or strung as a costume/cosplay nose. Costume Notes: Versions are included with and without breathing holes for those who wish to modify the nose to make it their own.…
2 walls, 5 layers. resolution .3 is OK or .2 for a smoother surface
The flexi parrot is a delightful model that serves both as an educational tool and a decorative desk toy. It can help beginners understand the mechanics of articulated joints and is also an engaging way to demonstrate the capabilities of…
Here, i want to share with you my Wheelbarrow Planter, that i made for my Garden. It was designed, so that it looks like it was made out of wodden Parts that could be found somewhere in a Forest. Its Ideal to be used with other Cartoon…
Simple carrot bookmark. Made for filament change for last layers.
Just print two holder without support. Snap in up to 16 arrows with 8 mm diameter. Three arrows with a diameter of 7 mm can be inserted in the middle.
Cambie un poco el tamaño para acomodarlo a mi lugar de trabajo : X: 86% Y: 86% Z: 100% Gracias davemoneysign !!
A cable chain to keep the heat bed cable from dragging along the base of he printer. Should help with the thermistor going haywire. Notes: ORIGINAL version. Thick. Does not fit with a back mounted parts cooling fan! The shroud “parks” on…
These instruments were used in ancient Mexico and they require a lot of pressure to produce their screaming sounds. You really have to blow as hard as you can. So, designing my own and adapting it to work as a projectile took a ton of…
A remix of the awesome Parametric Rugged Box by Whitty, but in a narrow configuration with only a single latch/hinge. This was originally intended to create my own custom boxes that perfectly fix the MTM Ammo Box Mini Crate. The STL's are…
Jarron con pared interior, para darle mayor fuerza , cojida idea de modelos parecidos , pero diseñado, modificado y convertidas formas y secciones. Queda muy bonito
Parrot figurine I sculpted in Zbrush. The model will need supports when printing, due to its complex shape. I designed this model with the intent of representing a variety of parrot species in one sculpt, it can be painted up post…
🇲🇽 ¡Bienvenidos a San Miguel de Allende, Guanajuato, México! Welcome to San Miguel de Allende! This model was created by MiniWorld3D member Daniel Muradás . La Parroquia de San Miguel Arcángel (Spanish for Parish of Saint Michael…
您好,如果您打算下载此模型,请考虑留下赞、发布制作、留下评论甚至捐赠。谢谢! Hi There, if you plan on downloading this model please consider leaving a like, posting a make, leaving a review, or even a donation. Thank You!…
Here we have the second of many scale figures I have created for my 00 train layout. The figures are firstly put together in MakeHuman setting up the armature and clothing, and a basic pose. I then import into blender to get the final…
Photogrammetry “scanned” model of a corner notched arrowhead I flint knapped.
A simply wall mount for bow and arrows
Designed from scratch with thinner vanes and a 3" deep hole to fit a 5/16" wood dowel (Home Depot). Vane is about 3 3/4" long. I recommend increasing printing flow to 102% as I've experienced a bit of underextruding. I recommend attaching…
Introduce a touch of charm to your keys with the "Bunny Holding a Carrot Keychain." This delightful keychain features a cute bunny happily holding a carrot, making it a perfect accessory for Easter or any time you want to add a bit of…
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Firstly, All credit for this model goes to Arrowhead Game Studios & Sony Computer Entertainment My son is a big Helldivers 2 fan and I originally sought and found a model but unfortunately after repeated attempts (printing it upside down)…
This design does not require an AMS ✅ I also made a version without petals (without ears). To keep the petals closed, I used cylindrical 5x2mm magnets 🧲, which are glued into matching recesses 💧. As a pin, I use a 25mm piece of filament.…
This is my first public model, sorry for not being super trooper. I did my best. I created this for my kids and they like it so much. Unfortunatelly whistle is so noise, sorry for this. I started with this model…