Wyniki wyszukiwania: carcass

Sortowanie

255 modeli

P
PrintablesSaddamCZ

Customizable board game (Carcassonne) tile grids

My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…

Wydruk około 6,45 €–7,88 € nettoWstępna wycena jednego wariantu

Pobrania
1990
Polubienia
283
Ocena
4,97
P
PrintablesDianeC

Carcassonne Meeple Button

A simple fun Meeple button to sew for the Carcassonne lovers. The regular size is 25mm x 24.28mm x 2mm, then it is good for pants or jackets, actually even some fleece shirts too and bags/pockets with flaps. I've added a smaller size,…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
133
Polubienia
67
Ocena
5
P
PrintablesFelixTeutsch

Everydays 042 – Stackable Carcassonne Meeple

Today’s design is a playful twist on a classic: a meeple inspired by the board game Carcassonne , redesigned to be stackable and balance-friendly . The proportions and geometry were adjusted so meeples can be stacked on top of each other…

Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu

Pobrania
83
Polubienia
17
Ocena
0
P
PrintablesMrPrusa

A carcassonne meeple organizer (with all extensions)

Recommended to print with a 0,4 nozzle. Others should work too! Otherwise the model is completly easy to print! Have fun with it!

Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu

Pobrania
31
Polubienia
9
Ocena
0
P
Printablestimqui

Carcassonne / Karak / Isle of Skye Tiles Grid

I had bad results (too tight & too small joints) with the other one's tiles grid… made my design. Easily snaps together with big L-shaped joints to grow the board in any direction as necessary. It helps when the board has to be shifted if…

Pobrania
3445
Polubienia
632
Ocena
4,98
P
PrintablesKatarn

Carcassonne Meeples/Figures - Complete Set!

All Carcassonne figures available (including expansions) to replace the ones you have lost or to create full player sets to be able to play with more friends. The figures are separated into two large groups, those that belong exclusively…

Pobrania
1151
Polubienia
137
Ocena
5
P
Printableskap42

Carcassonne Tile Tower

The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…

Pobrania
1124
Polubienia
195
Ocena
4,94
P
PrintablesHonex

CARCASSONE KARAK card dispensing tower

This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…

Pobrania
1062
Polubienia
136
Ocena
4,9
P
Printablesflow_241

Carcassonne storage and sorting boxes

Space-optimized the original thing ( Carcassonne Boxes by conlan89 - Thingiverse ) to fit more of these boxes in the box of the base game. Every box is designed to have the space needed by the parts + 3mm clearance. Also added some more…

Pobrania
836
Polubienia
161
Ocena
4,79
P
Printablesflow_241

Carcassonne Meeple Score Scoring Flags

Created some scoring flags for carcassonne meeples. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: DasFilament PETG/PLA Various Notes: Print with 1 perimeter to…

Pobrania
832
Polubienia
150
Ocena
5
P
PrintablesCtihy

Karak / Carcassonne 4x4 tiles grid / mřížka

U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…

Pobrania
799
Polubienia
79
Ocena
4,9
P
PrintablesKaxna

Carcassonne/Karak tile grids and holder

My remix of https://www.printables.com/cs/model/29030-customizable-board-game-carcassonne-tile-grids Thinner - low material, still stable, faster print.

Pobrania
743
Polubienia
72
Ocena
4,82
P
PrintablesJan Vejtasa

Ultimate Karak & Carcassonne tile grid holder

Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…

Pobrania
733
Polubienia
92
Ocena
5
P
Printableskap42

Double Carcassonne Tile Tower

The Ultimate Double Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a…

Pobrania
689
Polubienia
78
Ocena
4,83
P
Printablesolivvybee

Carcassonne Big Box (2021) Insert

This is a box insert for the white Carcassonne Big Box released in 2021 (sometimes called Big Box 2022, the White Big Box, Big Box 7, or Big Box v3.0). The main feature is the meeple storage, which fits all the meeples of each colour into…

Pobrania
668
Polubienia
145
Ocena
4,8
P
PrintablesJoão Jordão

Carcassonne 3D tiles

One day after work I got invited to a friend's house for a dinner and games night. It was then, that I discovered the Carcassonne tile game. At first, it seemed a lot like dominoes. However, it was hidden and not seen at first sight the…

Pobrania
611
Polubienia
177
Ocena
5
P
PrintablesMartin

Holder for Karak/Carcassone tiles grid

Holder for this model: https://www.printables.com/model/107941-karakcarcassone-tiles-grid Height is for 11pcs of grid. It is a minimalist holder for tile grid. I printed with PLA, 0.4mm nozzle, 0.2mm layer height.

Pobrania
581
Polubienia
108
Ocena
5
P
PrintablesKyle Katarn

Carcassonne Tile Dispenser SPLIT Tower (Remix)

I redesigned the split towers by "Tquacken" for the Carcassonne game tile dispensary and added couplings or fasteners to the ends to make it easier to assemble. Here you will only download the redesigned towers. View the original design…

Pobrania
440
Polubienia
69
Ocena
5
P
Printablesdaveh_dev

Carcassonne Magnetic Tile Grid and Box Organizer

I tried out a few of the other existing printable Carcassonne grids, and most of them worked great. But I wanted a version that would fit inside the game box. So I designed my own grid from scratch (though it's definitely inspired by some…

Pobrania
427
Polubienia
91
Ocena
4,8
P
PrintablesJoppe

Custom Carcassonne meeple set

Set of different shaped meeple for your Carcassonne boardgame mods or meeple replacement.

Pobrania
404
Polubienia
41
Ocena
5
P
PrintablesAngus L

Carcassone Meeple / Abbot replacement

This is the most dimentional / shape accurate possible Abbot and basic Meeple models, please use them responsible , do NOT USE THIS MODEL FOR PROFIT, also do not publish it as your's, I have no rights over the design , only did the model,…

Pobrania
391
Polubienia
45
Ocena
5
P
PrintablesSomeJW

Double Sided Carcassonne Meeple Scoring Flags

Feel free to buy me a pizza if you want. Contributions appreciated but never expected. Love the original flags but it bothered me that the numbers were backward for the opposite side so I created these flags with the score on both sides.

Pobrania
380
Polubienia
75
Ocena
5
P
PrintablesKarel

Carcassone - náhradní figurky

Náhradní figurky do hry Carcassone

Pobrania
331
Polubienia
43
Ocena
4,9
P
PrintablesCtihy

Držák mřížek / Grid holder - Karak / Carcassonne

Držák mřížek pro hru Karak / Carcassonne - kompatibilní je s touto mřížkou (pojme 16 kusů): https://www.printables.com/model/1150222-karak-carcassonne-4x4-tiles-grid-mrizka Tisknul jsem na MK3S+, 0.20 Quality, PLA silver.…

Pobrania
319
Polubienia
29
Ocena
5
P
Printables4noxx

Carcassonne Tower

Carcassonne Tower

Pobrania
308
Polubienia
49
Ocena
5
P
Printablesjanek

4x4 customizable Carcassonne tile grid

In the Carcassone is a game requiring players to build a custom map by laying tiles one next to another. This grid helps keeping the map in case of any "accident" - perfect for playing with children. The model is fully customizable (with…

Pobrania
275
Polubienia
26
Ocena
5
P
PrintablesLonelyCowboy

Customisable tile grid for tabletop games such as Carcassonne, Karak, Isle of Skye, Alhambra and many more...

Prelude I stumbled across OpenSCAD while looking at another tile grid design. It was a tool I hadn't come across before and it piqued my curiosity. This first design was intricate and complex and proved to be a steep learning curve. When…

Pobrania
246
Polubienia
37
Ocena
5
P
PrintablesVoxel3D_NL

Carcassone big box meeple organiser

Meeple and character box/organizer. This model organizes all meeples from the big box set up to 2 colors/teams. For the Carcassonne Big Box, you'll need 3 3D printed boxes for all 6 colors. You can now grab a box per 2 players and don't…

Pobrania
234
Polubienia
44
Ocena
5
P
PrintablesAndré

Nemesis Intruder Carcass Tokens

8 tokens are in the core game, so print 8 of these, I guess? I made them oval, as the human corpse models that came with the Kickstarter-edition. alien_head.stl is the first one. nemesis carcass.stl has a base that matches the space…

Pobrania
222
Polubienia
24
Ocena
5
P
PrintablesFabNera

Counting trays Carcassonne

[fr] Alvéoles pour comptage Carcassonne Ne perdez plus vos marques à cause d'un geste brusque. Positionnez votre carte de comptage de points entre le cadre et la structure alvéolée. Les deux pièces sont divisées en deux pour être…

Pobrania
220
Polubienia
64
Ocena
4
P
PrintablesShadowLink

Carcassonne Tile Grid Holder Tree

A "tree"-style holder for the excellent Carcassonne Tile Grids at https://www.thingiverse.com/thing:25158 It can probably hold about 30 of them (I have 28). We play with the base game, first expansion (Inns & Cathedrals), and second…

Pobrania
219
Polubienia
44
Ocena
5
P
PrintablesHankoTom

Carcassone/Karak Card holder

This model is for the Carcassonne game. It is 4 merge tower for 320 cards (4 x 80), dimension of card: 45 x 45 mm. Overall dimensions are cca 200 x 200 x 60 mm. I modified the model, for supportless print

Pobrania
218
Polubienia
32
Ocena
5
P
PrintablesMaFy

Kids Carcassonne Meeple

Meeple for kids version of Carcassonne game - origin name My FIrst Carcassonne

Pobrania
214
Polubienia
18
Ocena
5
P
PrintablesWurflie

Carcassonne Insert for Big Box (V3.0) Content

This insert is made for the original Carcassonne base game box (V3.0) and will hold all the contents of the Carcassonne Big Box (V3.0). The original Carcassonne Big Box is much bigger than it needs to be and is a pain to carry around.…

Pobrania
209
Polubienia
41
Ocena
5
P
PrintablesCeasar

Carcassonne Meeples & Pope

Just a simpel model of the Meeples and Pope from Carcassone, the Meeple have been on a diet and is a tiny bit slimmer but is correct in rest measurements. Will add some variations for the fun of it with some hats and body styles. Print i…

Pobrania
189
Polubienia
18
Ocena
5
P
PrintablesAlice Jacka

Carcassonne Meeple

I traced this in OnShape from a picture. https://cad.onshape.com/documents/58c7322e8014ff54fe8fbf56/w/e5eb89e05b7b0418a7bc01da/e/bfa30cb4cbbe1b594eb95a32?renderMode=0&uiState=67878e365fb96b0b0e8a4d96 THIS DOES NOT APPLY TO THE STL ON…

Pobrania
186
Polubienia
13
Ocena
5
P
PrintablesDT

Locking Carcassonne tiles

I loved the tile set but the tiles can easily shift around and change board placement - especially when people add tiles. This adds some locking tabs to the sides to prevent the tiles from moving around. Thanks to Martin for the original…

Pobrania
185
Polubienia
20
Ocena
0
P

Carcassonne Castle

Custom 3d castle piece for the Bridges , Castles, & Bazaars expansion of Carcassonne. Includes a hole to place the meeple in the castle. Print 12 to have enough The original is a little fragile and tight-fit. Use the stronger carcassonne…

Pobrania
165
Polubienia
16
Ocena
5
P
PrintablesQuin

Carcassonne Game Piece

Print game pieces in your favorite color

Pobrania
156
Polubienia
29
Ocena
5
P
Printablesmarek štěpka

Carcassonne tile grid

This tile grid supports 45mm pieces and its connectible. Printed on Ender 3 V2 at 200°C from PLA.

Pobrania
156
Polubienia
26
Ocena
5
P
PrintablesMartin Dravecky

Carcassone & Karak tile grid

Grid for board games like Carcassone or Karak. Grid is 4x4, but snappable to smaller sections like 2x4 etc. Extending sections during game is simple even with tiles already in place. Shape is optimized for printing with 0.4mm nozzle and…

Pobrania
144
Polubienia
17
Ocena
5
P
Printablesrasmus

Carcasonne tile grid for Ghosts Castles and Cemeteries / Mist over Carcassonne

The tile grid from timqui have been modified to contain the large 2x2 tile for Ghosts Castles and Cemeteries / Mist over Carcassonne

Pobrania
138
Polubienia
17
Ocena
0
P
Printablesebarnes

Box for Carcassonne tiles (4x4) with tiles

Wanted to do the 4x4 grids and the box but the original box only did 3x3. I had to shrink the box and lid to fit my Prusa Bed and I break the box into separate parts so that I could do a multi material print but ended up just doing a…

Pobrania
134
Polubienia
19
Ocena
0
P

Carcassonne Card Box

Carcassonne game card organiser

Pobrania
131
Polubienia
20
Ocena
5
P
PrintablesAnordil

Carcassone 20th Anniversary box organizer

A set of organizers tailored for the 20th Anniversary edition of Carcassone. Features: - a box with a lid for the base tiles - a box with a lid for the river expansion - 5 boxes that fit on a frame for the meeples It all fits snuggly in…

Pobrania
130
Polubienia
35
Ocena
3
P
PrintablesMarc Bres

Carcassonne Boxes

I've been checking all the Carcassonne box organizers, but finally decided to design my own ones. I've created 3 boxes to store the base game which holds 24 tiles each, and then started creating boxes to store the expansions, getting the…

Pobrania
128
Polubienia
44
Ocena
5
P
PrintablesMaker_Me

Kartentürme für das Spiel Carcassone

Damit die Spielfeldkarten beim Carcassone spielbereit gelagert werden können stehen diese Türme mit Karten bei uns griffbereit im Regal.

Pobrania
125
Polubienia
24
Ocena
0
P
PrintablesSerathian

Carcassonne - Better Big Box + More!

Compact Carcassonne box that fits all the big box expansions plus more! There are two files for the main box available: STL file (With or without text) that fits the following: Base Game - The River - Inns & Cathedrals - Traders &…

Pobrania
122
Polubienia
25
Ocena
0
P
PrintablesPosix

Carcassonne 20th Anniversary river tile grid

This is a remix to hold the Carcassonne 20th Anniversary starting river tile, which is doubled in length. For printing, use the settings of the original model.

Pobrania
115
Polubienia
23
Ocena
0
P
PrintablesBulldogBite

Carcassonne 3x3 Tile Grid & Holder

There are already a lot of grid solutions for Carcassonne - but either I didnt like the design or I read about problems regarding the tolerances. The Grid: As I wanted to play Carcassonne and not for countless hours with my 3D printer I…

Pobrania
115
Polubienia
7
Ocena
5
P
Printablesplachytomas.cz

Top Cover for Karak/carcassonne card holder

Top cover for textured card holder from https://www.printables.com/cs/model/100702-karakcarcassonne-card-holder 0.2 layer, printed from PLA

Pobrania
108
Polubienia
15
Ocena
5
P
Printablesbernieke

Carcassonne Tile Grid Holder

Not a remix as such, but an accessory to store the grids in. Holds up to 18 grids. I've also included the freecad file, so if so desired you can easily make this taller or shorter by adjusting the length of the padding of the legs.…

Pobrania
106
Polubienia
33
Ocena
5
P
PrintablesLa Robottega

Meeple Box for Carcassonne

A simple Meeple box, with the right dimensions to house the eight base meeples per player you need to play Carcassonne! I suggest you to print them in clear plastic, 0.3 layer height. Very classy. Otherwise you'll need as much filament…

Pobrania
105
Polubienia
32
Ocena
5
P
PrintablesriksuFIN

Carcassonne Organization System

So, I have Carcassonne board game (Big Box version, which is base game and most of small expansions), which came in nice, big box and okay-ish slots for organizing… Well, most stuff.. And absolutely no room for any seperately-bought…

Pobrania
95
Polubienia
25
Ocena
0
P
PrintablesLukynovoCZ
Pobrania
92
Polubienia
13
Ocena
5
P
PrintablesMKT-007

Carcassonne Pieces

If you have lost a Carcassonne piece, or just want a new color, look no farther! If you like this, check out some of my other designs here: https://www.printables.com/@BuckyKatt129 Happy printing!

Pobrania
91
Polubienia
23
Ocena
5
P
Printablesvhotspur

Karak/Carcassonne tile grid box

Simple box for Karak/Carcassonne tile grid. Model created for OpenSCAD, easily customizable for different height etc. Latest source at my GitHub repository: https://github.com/vhotspur/3d-things/tree/master/games The files are for the box…

Pobrania
87
Polubienia
19
Ocena
5
P
PrintablesBogdan Jadamus

Karak, Carcassonne - stojan, card stand

Stojan na karty her Karak a Carcassonne. Stojan je 14,7 cm vysoký ze se přesně na šířku do krabice rozšíření karaku. Karak and Carcassonne card rack. The stand is 14.7 cm high and is exactly the width of the karak expansion box.

Pobrania
86
Polubienia
13
Ocena
4,5
P
PrintablesRyCoFX

Carcassonne Tile Organizer

Before : After: Prints fine on a Prusa Mini. I suggest changing the filament colors 2 times to get outlines on the top and bottom. To save on filament and print time there is .3mf file that removes the bulk in the middle.

Pobrania
83
Polubienia
25
Ocena
0
P
Printablesemirikol1984

Carcassonne Meeple Keyring

Keyring with Carcassonne meeple form, designed to print with a flexible filament like ninjaflex or smart flex, designed as a gift to my wife. You can print it in a non flexible filament at your own risk, flex will help to improve ring…

Pobrania
79
Polubienia
19
Ocena
4
P
Printableskifreak

Carcassone Grid River double tile

The model is the same than the original (so, please follow the instructions in the trimqui post) except I remove a couple of dividers in the middle to works with the double tiles in the 20 Anniversary with the mini-expansion the River.

Pobrania
77
Polubienia
9
Ocena
0
P
PrintablesSen044

Carcassonne Big Box +

Całość mieści wersję Big box, pozostawiając miejsce na dodatkowe kafle.

Pobrania
77
Polubienia
21
Ocena
0
P
PrintablesTheJoi88

Carcassonne tower (ghost)

For ghost version you need 3 times 20pcs need to use organic support for tower carcassonne_cover_V2 - is more strong and with the text

Pobrania
77
Polubienia
11
Ocena
0
P
PrintablesM3D

Carcassonne Replacement Game Figures

Are you missing any game pieces for your beloved Carcassonne board game? This design offers a collection of replacement figures for many of the game's components. While it doesn’t yet include every piece, it's a great starting point for…

Pobrania
76
Polubienia
15
Ocena
4
P
PrintablesSimeon Kavander

carcassone boardgame figures

just needed another set of caracters in to the game and modeled these

Pobrania
76
Polubienia
6
Ocena
0

Meeple-shaped box | Compatible with Carcassonne

Store your meeples or other small accessories with this cute 2-piece meeple-shaped box! Great decoration for your desk or board game shelf too! Easily fits 10 meeples (more with some arranging) Need meeples? Check out the meeple board…

Pobrania
75
Polubienia
22
Ocena
0
P
Printableskap42

Carcassonne Farmer City Counters

When scoring the farmers at the end of Carcassonne it is easy to lose count of which cities you have scored. By using these meeples the scoring will be simpler, and more correct. For each city, you count, place one of the meeples on it.…

Pobrania
71
Polubienia
19
Ocena
0

Basic carcass of rural cottage in 1:160

THIS IS A WORK IN PROGRESS. A basic carcass of a rural cottage in 1:160 without window or door furniture which I find is best added printed on clear film. The dividers and floor can be added to separate the rooms if required ( for…

Pobrania
71
Polubienia
5
Ocena
0
P
PrintablesAlCheMaker3D

Grundspiel - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
69
Polubienia
11
Ocena
0
P
Printables3DLYX

Carcassonne Tile dispenser

Took the tile holder, added some slots and a bank to make it as dispenser. You can now pull out the cards from beneath the stack in the dispenser. Features a counter on the backside and a lockable lid an top. Wich is optional of course.…

Pobrania
69
Polubienia
23
Ocena
0
P
PrintablesSte_98

Meeple Case Box - Carcassonne Big Box

Case box for all meeples in Carcassonne big box. You can use every color you want to print it. Dimensions: 71x70x29. Printed with PLA.

Pobrania
67
Polubienia
19
Ocena
3
P
PrintablesTweako

Carcassonne river tiles holder

Carcassonne river tiles holder Category: Toys & Games

Pobrania
65
Polubienia
16
Ocena
5
P
PrintablesMFBocka

Carcassonne / Karak / Isle of Skye card box

Simple box for Carcasonne cards with separator.

Pobrania
63
Polubienia
11
Ocena
0
P
Printablessomeoneonly

Carcassonne compact organiser/box

Fits the base game with river one expansion. Takes about 8 hours to print at 0.3mm layer height. I designed it to use as little material as possible but still be strong/thick enough to support it(hopefully). It can be easily carried to…

Pobrania
63
Polubienia
20
Ocena
5
P
PrintablesOGPattison

Magnetic Tiles | Karak, Carcassonne, Isle of Skye

This 3D-printed adapter is designed for board game tiles (45x45mm) like Karak, Carcassonne, Isle of Skye, providing a press-fit system for securely holding the tiles in place. It features slots for 8 neodymium magnets (2x2mm) that…

Pobrania
62
Polubienia
11
Ocena
0
P
Printablesbernieke

Dual Tile Tower with lid - Carcassonne

Joined two instances of the original tower (print up to the required height), and made a lid for it. The lid has sloping walls on the inside for a good friction fit. Print Settings Printer: p3steel Rafts: No Supports: No Resolution:…

Pobrania
62
Polubienia
6
Ocena
4,5
P
PrintablesFoxhill

Carcassonne booklet placeholder for Big Box

If you are like me, it has annoyed you that the booklets in the big box are not in a fixed place. This placeholder with the nice Carcassonne logo fixes that. And it adds a nice 3D-logo in the center of the Big Box. I have included a .svg…

Pobrania
62
Polubienia
7
Ocena
5
P
PrintablesUri Mikhli

Obelisk Meeple for Carcassone

The original obelisk https://www.myminifactory.com/object/3d-print-obelisk-in-ghent-belgium-17375 was too tall and broad, but I like how it looks. I scaled the height down to 30%Z and the X and Y scaled down to 55% So now its the right…

Pobrania
62
Polubienia
8
Ocena
0
P
PrintablesDavid V.

Carcassone - Guard Meeples

Figurka strážného do Carcassone duchové

Pobrania
58
Polubienia
5
Ocena
5
P
PrintablesCelta

Carcassonne: Hunters and Gatherers Insert

Are you tired of fumbling through bags and boxes during your "Carcassonne: Hunters & Gatherers" adventures? This meticulously designed 3D printable insert brings order to your game, making setup and teardown a breeze! Features…

Pobrania
58
Polubienia
20
Ocena
5
P
PrintablesKaxna

Carcassonne gold bricks box

Small organizer for large Carcassonne box. It's for golden bricks, bridges, witches and wizard. Nozzle: 0.6 Layer: 0.2 mm Perimeters : 3 Material : PLA or PETG

Pobrania
57
Polubienia
10
Ocena
0
P
PrintablesAlCheMaker3D

Erweiterung 3 - Burgfräulein & Drache - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
56
Polubienia
7
Ocena
5
P
Printableshoweln

Carcassonne Magnetic Tile Grid (thicker with additional magnets)

Due to the conversion from stl to an editable file, the size scalled up by 10x. So printing will need to be scaled down to 10% to be the same size as the original grid. The file name lists scale 10.1, this % will produce a slightly larger…

Pobrania
56
Polubienia
10
Ocena
0
P
PrintablesKaa

Carcassonne Big Box 6 - small storage

This is a box to hold all the content from the Carcasonne Big Box 6. All expansions have their own slot, and everything fits easily. This box is much smaller then the original one, and because the height is limited you can move the game…

Pobrania
54
Polubienia
5
Ocena
0
P
PrintablesAlCheMaker3D

Erweiterung 2 - Händler und Baumeister - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
52
Polubienia
6
Ocena
0
P
PrintablesD.L.

Carcassonne Tile Holder

This print is intended to provide storage while also allowing tiles to be easily distributed to players. Printed in PLA, fits inside original game box.

Pobrania
52
Polubienia
15
Ocena
5
P
PrintablesPlasticNinjas

Carcassonne: hunters and gatherers insert

Органайзер для новой версии (дизайна) игры Каркассон: Охотники и собиратели. ATTENTION: the organizer was designed for the INTERNAL dimensions of the box 188* 271 (Russian version of the game). Measure your box before printing, there is a…

Pobrania
52
Polubienia
17
Ocena
0
P
PrintablesP Reardon

Carcassonne Magnetic Organsiser 3x3

I have seen many similar variants on here but they were all 4x4 grids which my printer was unfortunately too small to print Magnet holes are for 2x1mm magnets ( FINDMAG 50 Pcs 2 mm x 1 mm Mini Magnets, Fridge Magnets, Small Craft Magnets,…

Pobrania
51
Polubienia
14
Ocena
5
P
PrintablesBilld

Carcassonne Cité Silhouette

Silhouette of the Carcassonne medieval cité (city). You can attach a magnet and stick to the fridge or any other magnetic surface. Also add in a frame with plain background. A decorative object. I found a suitable image online, then used…

Pobrania
51
Polubienia
5
Ocena
0
P
PrintablesMrPrusa

Carcassonne bridge (industrial)

A bridge for carcassonne in an industrial style. It is in the right scale. Can also be used for modeling or toy train bridges. Printing with supports is recommended!

Pobrania
51
Polubienia
3
Ocena
0
P
Printablesejprints3d

Carcassonne board holder

This works like large puzzle pieces so all you need to do is print some and click them together to form the playing board. I recommend printing 18-25, (depending on how many expansions you have) The 3x3 with no logo (symbol) will work the…

Pobrania
50
Polubienia
16
Ocena
0
P
Printablesbrunoip

Carcassonne travel box

A box designed to fit the board game Carcassone without wasting any space. There is also space under the lid to fit a peper copy of the score board.

Pobrania
49
Polubienia
7
Ocena
0
P
Printableszacharow.makes

Carcassonne Amazonas Board Game Meeples

This set includes replacement meeples for Carcassonne Amazonas , featuring two new designs : Boat – print on its side for best results House – print in normal position Both designs work without supports , making them quick and easy to…

Pobrania
48
Polubienia
9
Ocena
5
P
Printablesnskrotzki

Carcassonne Box Split

Just quickly took this into Tinkercad and split the box into 2 halves. This allows you to print the entire box on more printers like Ultimaker 2s and 3s as well as Makerbots. 9/12/17: I forgot to add the meeple trays! Take a look at the…

Pobrania
48
Polubienia
6
Ocena
0
P
PrintablesThrap

Simplified printable Carcassonne Base Game + river + abbot

Print this at 2 mm, it can be scaled down in the z axis, up to, I think, 1 mm. No need to do any multimaterial nonsense, just paint it afterwards following the height and the shape of the elements. I made it so that the roads \ rivers…

Pobrania
48
Polubienia
9
Ocena
0
P
PrintablesAlCheMaker3D

Erweiterung 10 - Manege frei - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
47
Polubienia
6
Ocena
5
P
PrintablesRik 2408

Carcassonne Junior Box

A custom made box for Carcassonne Junior To get rid of the big box provided Latch need to be printed 2 times Use the 2 colored file to get the logo on the lid. If this does not work Import the inlay and the negative inlay at the same time…

Pobrania
47
Polubienia
14
Ocena
5
P
PrintablesBrian Davis

Mists Over Carcassone starting tile 2×2

Added some negative space over some parts of the grid to accommodate the 2×2 starting tile for the Mists Over Carcassone expansion / co-op game. It looks awful in the Slicer but prints perfectly. :P

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesAlCheMaker3D

Erweiterung 1 - Wirtshäuser und Kathedralen - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
46
Polubienia
6
Ocena
0
P
PrintablesAlCheMaker3D

Erweiterung 6 - Graf, König und Konsorten - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
46
Polubienia
8
Ocena
5