1098 modeli
Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…
Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…
This is a remix of @silviutoderita's Milk Crate - No Supports https://www.printables.com/model/732947-milk-crate-no-supports I've uploaded the Flexi Leg as a separate project so you can add Flexi Legs to anything you like: milk crates,…
This model is a remix of popular model of battery storage from CAD-Guy . Thanks to this modification you can use each of the beer crate for combination of AA, AAA, 9V and CR2032 batteries (not specifically 1 crate for only 1 type of…
Combined stackable beer crate for AA, AAA, 9V Block, CR2032 and a empty crate for batterys. The crate needs a support geometry at the bottom.
Proudly my most detailed model so far which also looks great in brown or wood filament. Can be used with or without inserts to hold what you need. I added an insert for each of the batteries that I have and was able to physically test: AA…
A simple box that looks like a storage crate from a science fiction movie. Pre-scaled to three sizes: 60mm, 90mm, and 130mm. Can be printed in separate pieces to accommodate multi-colored prints. No supports needed! Multi-color lids have…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Simple tape dispensers in the form of the legendary beer crate model Tape dispenser for two tape spools side by side. You can easily store and use 2 types of tapes for example. Model containes 4 parts: Crate beer Lid with cutter part…
Beer crate for battery storage (AA and AAA batteries) from a German Beer Brand “Alpirsbacher Klosterbräu”. Handels are optional and needs to bee clued to the Beer crate.
The sword version is for holding swords with symmetric crossguards. The saber version has the cutout angled so that it supports the sabers with the offset center of gravity.
This is a modified version of the 9V crate from CAD-Guy that can fit up to 5 9V batteries. Together with the legs from Wojciech Kawa it is stackable. Therefore the 9V crate uses the same base pattern as the empty crate from CAD-Guy. As…
I leave you a model of the Jezero crater of the planet Mars. You know, currently being explored by the Persevere robot and the little Ingenuity helicopter. The model is made from contour lines at a height of 50 meters. Source: @ESA/DLR/FU…
Adapter for stacking Crates (S) 150x100x55 mm or Double crates (S) 150x100x105 mm twice on the Palette (XXL) 242x202 mm or direct on the Crates (XXL) 240x200 mm with her top cover to be more rigid. Palette XXL v1c Upgrade , a stack…
The Urban Proof crate I had bought before my 3D printer time. I had mounted it with hard rubber pieces as spacers on a Racktime Snapit adapter . I replaced the rupper pieces now with mount plates. With the two new mount plates, the crate…
With the fold-down handle, it's easier to shop with the crate because you only need one hand to hold it. The model is stable. In my test, it easily held 18 kg (two six-packs of 1.5 l bottles of mineral water). To put the handle together…
3D Printed AGF Beer Crate – Perfect for the True Fan! Take your AGF fandom to the next level with this custom-designed 3D printed beer crate! Engineered for both style and durability, this crate is ideal for showcasing your support for…
Tento model jsem vytvářel sám v programu Autodesk Inventor Inspiroval jsem se modelem https://cults3d.com/en/3d-model/gadget/beer-crate-aa-battery-holder Vymodeloval jsem box podle fotek - rozměry nejsou identické STP modely jsou…
Just Modified it to be easier to print with no supports. Category: 3D Printing
From YK42: "I LOVE the beer crate design from Marzochi and the subtle stacking features from TontoTraveller make them so much better! I did not want to change anything, but I did want to add labels and expand the range of batteries. I…
Organize your workspace like a pro! This upgraded Honeycomb Edition of the Stackable Crate Plus combines structural strength with a modern aesthetic, optimized specifically for 3D printing. Key Features: Perfectly Stackable: Designed for…
Need a little extra storage for nuts and bolts readily accessible? maybe a drink holder. versatile storage crate for Milwaukee packout system. Print at scale, supports may be needed along bottom of crate depending on printer. crate itself…
I created this remix so you can put a milk crate on your Skadis pegboard. There is an option with a solid bottom (smaller things won't falling through) and an option with a traditional bottom. The crate is 3.4in x 3.8in x 3in. Supports…
Hallo Freunde, ich biete euch hier einen Batterie Organizer in Getränkekasten form zum download an. Ihr findet hier Kästen für AA, AAA und 9V Batterien. Ich hoffe sie gefallen euch.
General This is a re-upload of my favourite battery holder solution from Thingiverse. The original from there is unfortunately gone (used to exist here https://www.thingiverse.com/thing:4906830 ) I have not made this model, but…
I always wanted to design a nice looking stackable crate primarily for testing my 3D printer. This crate is designed to be printed without supports by relying on bridging capabilities of filament and printer. Best print settings are 0.2mm…
I designed this model based on a storage crate sold at Lowes and manufactured by Kobalt. - Kobalt Storage Crate #371850 The original Kobalt crate is 18.3in x 14.6in x 9.9in tall, so this model is less than half the size. Nearly every…
Milk crate model with no supports required
Simple 18650 cell holder in the style of a beer crate. Holds up to 20 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2mm Infill: 5% - 10% Notes: Can be printed without supports if your…
Organize your 3D prints like a pro! The Stackable Crate Plus is stackable , optimized for 3D printing , and perfectly symmetric – the ultimate storage solution. The Stackable Crate Plus measures 180x120x63mm. The crate itself (without the…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
Small stackable crate I've designed. The original size is 150x95 mm, which prints fine with a 0.4mm Nozzle. When scaling down, I would recommend using a smaller one. It prints fine without support if your Bridging is well tuned. Else,…
03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…
UPDATE 5-14-2023: By request, added a half high crate. Then also made a quarter crate (half high, half length) so these can stack correctly based upon the Large Crate size. UPDATE 2-10-2021: Added a double-wide large crate by request.…
Model Crates are great! They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench. Build…
Two small beer crates to store AA and AAA batteries on the IKEA Skadis perforated plate. Thus, the full batteries are always ready to hand. In the AA beer box fit 12 batteries and in the AAA box fit 20 batteries. Thanks to Jardar K 66 for…
Set of labelad beer crates dedicated and adapted for storing and organizing of tea bags :) Organize your tea collection with this stylish set of beer crates - you can print them with filament colour matches to the type of stored tea and…
Update 08.11.25 : Added CR2450 - Thanks for you Feedback @Oliver_655161 Update 26.05.25 : Added LIR2032 - Thanks for you Feedback @Knocks_3289771 ______________________________________________________________________________________…
Stackable Crate Plus - Honeycomb Edition (less material) | REMIX note: The new crate (white) has 1.25 mm thinner walls and the bottom is about 1.5mmm thinner. In the slicer pics, you can see the material difference for the same settings.…
Battery holder XXL
Mini boxes in 4 different sizes. Use for decor or organization. They are easily scalable for bigger dimensions
Okay, I'll admit, I've seen a "Beer Crate” battery box, however, I don't think I've ever seen an actual “beer crate” in real life. Hmm. Anyhow… It inspired me to create something that was infinitely more familiar to me, a “Milk Crate”…
From the start, I've thought of gridfinity a lot like milk crates, so I added a gridfinity base to a milk crate (specifically https://www.thingiverse.com/thing:5335219)! Prints without supports. Sized to 1 grid, and 5u tall (not ideal,…
Only needs tiny supports for the openings. I've also added a stackable version (v2) which is backwards compatible with v1. Prints in 5h (PLA, HF 0.6mm, 0.4mm layer height) on a Core One. The stackable version takes a bit longer of course…
A half height beer crate to store 14x2 (28 total) CR2032 (or thinner) coin cells. Fully compatible with the original battery beer crate design. The gluable bottom part from the original also fits. Stacking two of these half height crates…
I scaled the original model to 62% and added a base to the bottom to fit in most vehicles cup holders. Just want to add on that I'm not an original designer, this similar design has been in my local area however I could not find a file…
Small stackable desk organizer for paper clips, thumb tacks, etc. Printed with the default PrusaSlicer generic PLA and prusament PLA profiles. For best results on the grids I'd recommend slowing down external and small perimeters to…
yet another stackable crate for 500 ml cans. Supports needed. A version for 250 ml Red Bull Cans is available aswell the logo was made using this model
This honeycomb crate is supposed to be easy print - You don't need to use supports, only proper bridging is needed.
This is a set of craters for miniature wargaming. Vary the scale, even non-uniform along the Z-axis to get more variety. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a…
A Wooden crate for the pallet jack with optional battery storage for 15x AAA and 16x AA. You can also make it without the battery racks and just use it as a box. Parts are glued together. I used Overture Light Brown PLA and set the…
The Perforated Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or…
About DJI Neo Adventure Command Center Introducing the DJI Neo Adventure Command Center : a rugged, all-in-one transport solution engineered for drone pilots who refuse to compromise. This shockproof transport vault not only houses your…
made a crate that can be scaled to your needs (and your printers' capacity)
2 sizes of crates that I created to be used as freight on a model train wagon note the little hole in the bottom is intentional, it allows you to put a toothpick in there and handle it more easely when painting. Designed for Prusa MK3s+…
The Perforated Crate is compatible with SBox for MINI - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39( 40 )mm x (2.8 - 3)mm…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly…
Barrel and Crate. Support: Prints without support Check out my other terrain models: https://www.printables.com/@NygaardDesign/collections/1739823 Ideas for enhancing your gameplay by using Terrain Strategic Strongpoint : Defensive…
The Crate is compatible with SBox for MK2/3 - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39( 40 )mm x (2.8 - 3)mm or M3…
Wooden Crates and Lumber Even in the future, people need materials to build with. Plants, wood as the backbone of many a backward planet's building strategy. Wood is use to make exquisite furniture, paneled walls, and more. In the lower…
Build Info: Parts can be printed with PLA. No supports needed (there are simple models without overhangs). No infill needed Dimensions: 69,7 x 53,4 x 35,0mm (same dimensions for AA and AAA crate) Worth mentioning: AA crate holds up to 12…
I'd been looking for some small robust stackable storage containers, with different opening options and came across Code and Make's “Stackable Storage Caddies", but after printing a few I decided I needed a slightly different solution…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. No supports required for this specific model. Feedback is greatly…
I redesigned the boxes by adding the battery model to the sides. This is a redesign of: https://www.printables.com/model/173788-customizable-stackable-beer-crate-for-all-types-of Print Settings Printer Brand: Creality Printer: Ender-3 S1…
Simple AA battery cell holder in the style of a beer crate. Holds up to 20 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2mm Notes: Can be printed without supports if your printer…
Simple AAA battery cell holder in the style of a beer crate. Holds up to 20 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm or better Infill: 5% - 10% Category: Hobby
I love the beer crates for storage! My button cells needed a new home, so I remixed again :-) This is a remix of 2 things, the famous battery beer crates and and a similar model found on thingiverse. I made some changes to the original…
Stackable 18650 Battery Beer Crate Simple to print model that prints without the need for supports and stacks with the other Stackable Beer Crates in this series. Holds 12 18650 batteries Print Settings Printer Brand: Prusa Printer: I3…
A simple wooden shipping crate.
A crate covered in cloth and a bag. Can be used as a piece of terrain or a clue/treasure marker Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3.…
Stackable storage crate. Print in place the crate. Created with Maker Tales course.
**Box**: Battery Box AAA Battery Crate Battery Storage AAA **Dimensions**: 6” x 3” x 2” **Includes**: - base (lower) - lid (upper) - lid trump punisher edition multicolor (upper) - insert - front plate **Materials** PLA, PETG, ABS, CF…
A simple edit of the original design, which had some overhangs that can be challenging for some materials like PETG. For now this only includes AA and AAA batteries. Like for the original design, the stackable rim is supposed to be glued…
Just an old crate 28-32 mm scale crate for DnD, dioramas or other tabletop games. —————————————————————————— Hey everyone! I wanted to share some exciting news with you - my first Kickstarter campaign for Gracewindale: The Gatehouse 3D…
New: Adapter for stacking Crates (S) 150x100x55 mm or Double crates (S) 150x100x105 mm twice on the Palette (XXL) 242x202 mm or direct on the Crates (XXL) 240x200 mm with her top cover to be more rigid. Upgrade V6 is out ! New shape, save…
The Crate is compatible with SBox for MINI - stackable toolbox system Assembly list of non-printed parts 4 pcs - metal axis 36(35)mm x (2.8 - 3)mm or M3 screw with internal hex head 8 pcs - metal axis 39(40)mm x (2.8 - 3)mm or M3 screw…
Easy and fast to print in one piece. The details make it nice to look at. Different versions and .step available if you want to modify it. Intended to be used as a 1:10 scale model but scaling to your needs is easy to be done. Note: The…
Please follow these instructions for assembly: https://www.printables.com/model/628351-hexagon-crate-33cl
Remixed the original and added a peg so it can fit into the honeycomb storage wall
It comes in two versions. One without function an one with removable lid. Printing: Print parts in the given orientation with the parameter you desire. Want to organize your newly aquired bunch of boxes or looking for some alternative…
Description [Intro] I would like to introduce to you my fancy Scifi Box! Or crate? Treasure chest? Do I need to model some gold coins for you to fill this thing up with? Hehe. I wanted to produce a crate of sorts that'd be larger than the…
A print-in-place crate/box in a heavy/industrial/armored/SciFi design. I usually tend to minimalistic and vase mode designs, but I wanted to do something bigger this time. This is also a design with a more restrictive license than I…
sprite extraction crate
An easy to print ho scale wood shipping crate.
Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…
The short drawer should fit underneath removable shelves, allowing for more spaces to be used with the drawers. Any infill, any layer height, supports required.
The crate measures 150 mm in length, 95 mm in width, and 55 mm in height. The crate without the top stackable pins is 52.5 mm high. The crate is stackable. made to be compatible with:…
Update: I added a Relief version. Also added new version for all sides with filled handles.
Podpory jsem měl jen na spodním osazení. PLA
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly…
I love these stackable crates by "Majrooo" for storing various items, but for flat things you waste a lot of space, because they only exist in one consistent height of 60 mm. Therefore I took the original model and edited it to get a…
Simple 21700 cell holder in the style of a beer crate. Holds up to 12 cells. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 Infill: 5% Notes: Can be printed without supports if your printer handles…
Pallet inspired by Stackable Crates by rodrigorosseto to hold a ground set of six, but the crates are stackable (not so much the pallets, it has a smooth bottom) Pallet has 2 versions, complete STL if you love supports, and a Top/Bottom…
The Crater Plato is a very interesting object to observe with a Telescope. The smaller Craters are used to check the optical resolution of your Telescope. source for the geographic data is NASA size is 400x400mm you can resize as you want…
… and found the answer, when I was going for a new drink: The bee crate stand! Versions for three, six or nine crates per stand. Just print a left and a right side frame and six bars of your desired lenght. (Atttention! The frames are not…
The platonic ideal of a shipping crate now in miniature and in deck box form. But be warned its contents my be hazardous to your health or maybe just the rest of your playgroup. This deck box will hold 100 double sleeved cards with a…
