239 modeli
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Wydruk około 22,26 €–27,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you accidentally throw it away, here it is without buying it again
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
It is designed to be modular to provide flexible use. The demi-spheres provides guides for easy gluing and you can print the grit number in 20 pt on a 3/8 ''(9mm) labels with any Dymo Label maker.
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
I've got a few younger nephews that are into Wild Kratts and I originally remixed the design to add additional animals. I wanted to make some new ones and now have a multi material printer. After some comments on the original of how they…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
An organizer for 6 Kenwood food processor cutting disks. Print instructions Check-out the width of the slots for the disks you need to store and adapt them in the fusion 360 model. Print top surface on the bed. No support needed.
Wydruk około 8,16 €–9,98 € nettoWstępna wycena jednego wariantu
If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
Hello ! I created simple but reliable bed leveling test for Ender 3 . It's designed that way for cover almost all bed - hot end don't hit the clamps of build plate. With that You could level all bed. I use that bed leveling test and it's…
A fully printable refillable disc notebook! Compatible with half letter, junior, or A5 refill paper (common size refills for 8 disc planners like TUL, Circa, Arc, or other Discbound systems). I used a Happy Planner hole punch to create my…
No supports. Inner diameter of the circles: 60mm. Height of the left section: 80mm. Height of the right section: 60mm.
Printed all the colors separately then glued together with some super glue. 15% Gyroid infill on the disc. 100% infill on the animals and accents. Used ironing on the animals to give them a smoother surface. Have a multi material printer…
My nephew is really into Wild Kratts, so I decided to make some power discs for him. I wanted to print all the colors separately, though, so I took the original blank model by JanusRH and separated out the disc from the accent part. It…
This is a wall-mount for orbital sanders with 150 mm sanding discs. I made it for the Menzer ETS 150, but it should work the same for Mirka Deros or similar sanders. One big benefit of this design is, that the force is on the top-side of…
Get the whole set! > https://www.printables.com/@TripleGWorkshop/collections/655985
Slowing down the rate of beans entering your coffee grinder has been shown to improve uniformity of grind distribution, and hence subsequent coffee quality. To avoid having to stand around manually feeding your Niche zero grinder one bean…
Stand for cotton swabsticks and discs
Here are several additional centering discs for Miklos Kiszely's excellent spool switcher and winder for respooling filament to fit the Bambu Lab AMS unit. I mainly designed these for some empty spools I have that have a recessed center…
Inspired by gordyt47_9409's 5 inch sanding disk holder . But that one had such sturdy, thick walls, that it would have taken 330 grams of filament and over 16 hours to print. Naturally, I felt it expedient to stay up all night and remake…
Holder for angle grinder discs. The discs are stored in two rows, the maximum disc size is 125mm. The holder is ideally attached with 4mm screws. Printing without supports, Infill: 10%. Share your printed model.
I got the idea from this print on thingiverse: https://www.thingiverse.com/thing:2996673 so all credit to SickRanchez for giving me this idea I decided to try my hand at creating something similar, with my own ideas added on top.…
Hello! Some days ago i came across " 6-Shot Disc Shooter " by uhltimate and i quickly fell in love with this toy and so did my 16 year old cat that likes chasing the discs haha.. First of all i want to say huge thank you to ulthimate for…
Woggin made an interesting design whereby one can slide two 'things' onto the jaws of your caliper and then can 'accurately' measure items that have lips, raised edges, etc. Like for example brake discs. The original design can be found…
QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs also for 200 cases and XL organisers
Larger spacers for the Joseph Joseph rolling pin . The largest it came with was only 3/8" (10mm). I recently needed one that was 1/2" (13mm) and designed my own. Also included larger ones for 3/4" (19mm) and 1" (25mm). Here is the source…
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 135°. Насадка подойдёт для сверла диаметром до 10 мм, угол 135° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
CrunchLabs is a subscription box engineering kit designed by Mark Rober. CrunchLabs Box 1 is a disc launcher using a flywheel to throw small plastic discs. This project has variations on designs to get different results. Try them out and…
Sanding using this pad feels natural. With an almost flat hand resting on the curved surface you can sand without tightening your fingers. This allows you to effortlessly sand for hours without cramping your hand or fingers. The Velcro…
this is the old model v2 is almost available: This is a remix of the original discs from uhltimate 's disc shooter Diferences between the original and the mine: more strenght more durable
The original discs lacked durability and remixes had irregular geometry. This remix offers discs in various thicknesses (1 mm, 2 mm, and 3 mm) with durable design and clean geometry. Choose from three different disc thicknesses to…
Hier stelle ich die Druckdateien für meine Schleifscheibenhalter für 125mm Schleifscheiben zur Verfügung. Es sind 2 Versionen vorhanden eine Hohe und eine niedrige. Entlich Ordnung bei den Schleifpads. Es gibt dafür auch eine Stapelpalette.
I grew tired of constantly repositioning my 125mm sanding discs on my orbital sander to achieve proper centering. Uncentered discs result in imbalance, leading to increased tool vibration, making it challenging to achieve a smooth and…
This is a puzzle I made after watching a youtube short. The puzzle concept is not mine. Just made it easy for 3D printing. Size of the closed box is 64x64x64mm, but can be scaled to your liking. Password for the solution file is…
A set of tracing discs that allow for even seam allowances or tracing of objects. Simply insert a pen tip into the center of the one of the discs, and trace, rolling the edge of the disc along the edge of the traced objects. The discs are…
Update 18 May 2026 I've added a second cutter designed to make 75mm (or 3 inch) diameter discs. It's the same design as the first 50mm disc cutter and it's printing, hardware, assembly, and use are all identical. The 75mm version needs at…
space-saving holder for seven knife discs (Ø160mm)
Print Settings : Filament tested : I used Pet-G but using PLA should help with the wobbling layer height: 0.2mm (works fine for more detail print 0.12) Infill: 15-20% Perimeters: 4 Supports: No Brim: No
Printable creature power discs from the PBS kids show "Wild Kratts." There are models for the arctic fox and arctic hare. I also included a Fusion 360 model with no animal so you can add your own! Print instructions If you want, you can…
Some more gas mask inlet parts, aesthetic covers for otherwise bare openings. Optimized for 0.6mm nozzle, should be fine with 0.4mm as well. No supports needed. Models in photos printed at 0.2mm layer height. General disclaimer: Use at…
I created this to be able to use my 5 inch hook and loop sanding discs. I added adhesive back velcro to the bottom and sides of the sand block to be able to attach the discs.
Looking for a horizontal storage system for your Disc Golf discs? This is a modular, stackable drawer storage system for Disc Golf discs. Create a whole rack for your discs. Often Disc Golf discs are stored in a vertical position for…
Compact 100x100 box with inserts for cutting discs, hex wrench, and arbor for 3" cut off tool. Milwaukee 2522-20 https://amzn.to/4lhKyMk I got this tool a few years ago because it was on sale and didn't think it would get much use. Turned…
A sanding block that uses 5 in sandpaper discs. It uses strips (or maybe a bunch of dots) of hook velcro on the bottom. You can use more on the sides, but you don't have to. There is another version with depressions on the sides, but I…
Remixed the original model by Nina1982. I noticed some artifacts in the original file, for some it probably wouldn't bother them. My OCD got the better of me, so I cleaned up each piece. I printed the original container and stored the…
I wanted to be able to quickly identify the discs so I used prusaslicer to add a label to them. Nothing fancy.
For printing, you should turn off the walls, bottom and roof layers, as well as paint over certain areas for supports
No supports. Inner diameter of the circles: 60mm. Height of the left section: 80mm. Height of the right section: 60mm.
A configurable disc generator for the great toy lamp “funny sunny” from vtech. These discs can replace the included and extra discs in case they got lost. (Not so unlikely with young kids) Instructions: Print ideally with plastic in the…
Kenwood Kitchen Machine Cutting Discs Sorter Recommend the print orientation as in the picture and support only for the round cutouts as in the gcode-file. Printed with a 0,6 mm nozzel and 0,4 mm layer height, Prusament PLA Vanilla White.
Using the .stl file from DrBoom's model I created discs 3, 4, 5, and recreated disc 2. NOTE: I have not verified these work. None of my discs have yet to break. I bought a used set and only then found out about these discs breaking. I'm…
Cotton Tower A holder-dispenser for cotton discs, with a screw-on cap. Easy to print, no supports required. It is sized for standard 58mm discs, two versions included, one with 100mm capacity as in the pictures (total height 153mm…
#Sometimes machine sanding is not appropriate and you need to hand sand for instance thin finishes or plaster I wanted a way to keep the sizes of sanding paper I keep to reasonable number so I am reusing an idea I saw on the internets (in…
Retro Realistic Hobbies YouTube Channel https://www.youtube.com/@retrorealistichobbies Print the discs with transparent filament or resin. Recommended infill settings: 100% when printing with clear filament. I painted the discs with…
No supports. Inner diameter of the circles: 60mm. Height of the left section: 80mm. Height of the right section: 60mm.
Simple 4 by 4 disc set up with 2mm lines between them to test 1st layer squish. The model has a height of 0.2mm so set that as your first layer. Prints in about 20 minutes and allows the user to see what difference changes make as they…
I made a quick model to keep 25mm sanding pads and rotary tool attachments organised. I recommend stacking pads so the soft sides are facing out, this makes it easier to insert and remove the pads. The holes in the top perfectly fit 3mm…
Seam Allowance Discs for sewing from 1/4" to 1" size.
Remixed the fine original a bit. I have a number of grits, but not that many sheets for each grit. Thus I shortened the pags. I also added a simple label with embosed numbers for the grit. You can change the text in PrusaSlicer before…
The parent is pretty good, but not without some tolerance and design issues. I may make other remixes for the tolerance issues, but at very least I wanted to share these improved discs, in STEP and STL format for sizes 53-57 mm in 1 mm…
Update 2026-01-01: As some people play with 12 discs in a 2-player game, I added two different files to support 12 discs: a 6x2 tray and a 4x3 tray. The 6x2 tray may not fit on smaller print beds, but the 4x3 tray should fit most. - - - -…
This model allows you to print your own discs for your disc-bound notebooks. You can use it to replace lost rings, restock your disc supply, personalize your journal with your favorite colors, or even create entirely new notebooks. The…
Just an ammo box for discs.
3 inset rings that can be printed in place and are fun to spin. Designed in OpenSCAD + solidpython
Rack for storing up to 3 grating and slicing discs in a vertical position. These are made for the Vorwerk Thermomix accessory WunderSlicer by wundermix (V1 and V2). Ideally for storing them inside a drawer or kitchen cabinet / cupboard.…
For teaching fractions a small remix of the original discs. Completely redesigned box. Now the box has a thread and handling holes for easier removal of discs from the box box without handling hole can be found here:…
Tunnel chamber for charging your glow disc, just put the disc in from one side, slowly take it out on the other and its done. You can add movement sensor for better battery efficiency or just turn it on and off manualy. 3 integrated holes…
This is a discsander faceplate for woodturning lathes. Put some self-adhesive velcro on it, punchout the holes (or don't), screw it on your favorit lathe, put some sanding paper on it and start sanding! I created and tested the M18x2.5,…
Print at 0.1 mm layer height, 100% infill.
1/10 replica of original Landrover steelies discs for TRX4 1/10 Defender. You need five M2.5x12 imbus bolts + five M2.5 nuts for each. Printed with PLA with supports 100% infill. It survive whole year from hot summer into freezing snow…
weight plates with different weights, designed to be able to customize the weight of a squat or bench press rack model
Replacement or new discs. Holds 6 blades instead of the original 3. You may still mount only 3 blades if you prefer. Designed this one for someone else. Has been working good according to him. Has the same blade height as the original…
Assortment system 125mm sanding discs box organizers
Sometimes you need to be able to quickly divide your work into equal or proportionate parts, that's why I made these models. This is, for example, useful in pottery when you want to make patterns or specific forms harmoniously spaced like…
I created this blade display for my Kenwood CookingChef food processor blades. The labeling is according to the numbers on the blades (the edges of the different blades don't have the same height).
These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs. The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on…
A set of sewing seam allowance discs. Put your pen through the hole in the middle and run the disc along the pattern. 10mm and 7mm discs available for download fusion 360 .f3d file also included. Print Settings Printer brand: Bambulabs…
Gridfinity for sanding discs and adapter
These are only the bobbin ends. You need to print 1x eew_mini2_bobbin_tube from https://www.thingiverse.com/thing:3262290 and either 2x of the "gf" (requires glue) or "pf" press fit disks per bobbin. NOTE: The "flat" end is an…
This is a design for the 5 discs used with the Fisher Price Record Player toy music box. The kids at my son's daycare had lost all but one of the discs, so I decided to print them new ones. I included the FreeCAD source if you'd like to…
The center part of the letter in the disc will fall out. DO NOT BE ALARMED!!! i added an unmarked driver bc why not
Diese Halterung soll die Flex-Scheiben in Position halten im Koffer. Die 2 Hälften habe ich mit Epoxy geklebt. This bracket is intended to hold the “cutting discs” in position in the case. The 2 pieces I glued with epoxy.
Compass sells a tire fit gauge here , but it only includes some useful sizes. The parametric Solidworks model for the disc can be adjusted for whatever you want. 23, 34, 38, 42, 48 and 54 mm discs are included with the kit, but I've added…
You attach this modules to your churrera so you modify the shape of your churros.
Replacement discs for ninja storm green samurai morpher - clips into place like the originals
I bought a Batplane toy from Goodwill but it only came with one projectile disc. I took basic measurements and whipped up about a dozen more for the kiddo in no time. Prints well without supports on my Prusa, and functions just like the…
3D Model for Tool Trolley Insert for Cutting Discs Compatible for drawers Compatible connectors included Dimensions: L- 150mm, W - 150mm, H - 35mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF…
¡Lleva tu entrenamiento al siguiente nivel! 💪 Dale realismo a tus proyectos de impresión 3D con este Banco de Press Plano ideal como maqueta, decoración o incluso como referencia para diseño industrial . ¿Qué incluye este archivo 3D?…
This is a modification of the Octagon Port greeblies included in Mike Baddeley's v.2 Astromech. The original files have two awkward elements to them. First, all of the parts are exported as a single STL file, which is not always the most…
Sanding and polishing dice requires flat sanding surfaces. So hand sanding on glass plates or pottery wheels is the solution. Sandingdiscs for drills mostly use velcro to attach sandingpaper to them and they have a softer base underneath…
Carry 5 of your mixes with you at all times. Stores 5 discs without cases, flip cover that secures with a small detent, this is modeled after existing manufactured cases, except with a durable flip cover. printed without support, looks…
Made hammerhead and cheetah models that are compatible with the discs posted by FlyingPurpleCow https://www.printables.com/model/26806-wild-kratts-creature-discs You can find other parts there
Works reasonably well. Is a little difficult to line up the threads and not crossthread it when screwing on the lid. Easy enough to print. As always FreeCAD model is available if anyone wants to modify it.
I have a friend with a dental obsession and a backgammon board, and she asked me to design these for her. Intended for color-changing printing. They are designed for a small backgammon board so the diameter of the disc is 13 millimeters -…
Customized version of https://www.thingiverse.com/thing:370976 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=370976 Instructions Using the following options: Snaps = 15 SetOrSingle = Single Resolution =…
This is a Tormek LA-122 honing disc holder that fits instead of the normal honing wheel of the Scheppach 2000s. Parts has been oriented in the proper direction for printing. Only the outer part of the inner retaining ring for the big…
This is an original jig designed to fit 25 round medals/discs of 25 mm (2 mm thick) . It is fully adapted to the Prusa Mini print bed , so you can print it easily in one piece. The jig also includes 4 corner holes that align with the…
Used for Push Plastic spools for the rewinder.
Decorative windscreen-mounted holders for tax and insurance discs. I got tired of the terrible ugly standard vinyl holders, so made something a little nicer. These accommodate the standard (Ireland/UK) tax disc which is 75mm round, and…
I had a stack of various grit 3 inch sanding discs in a repurposed cardboard box. Found a lot of models for 5 inch discs, thought about just scaling one of those, but instead spent about 10 minutes in tinkercad and made my own..
Tool holder for safety cutting discs. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 437,14mm W - 144mm H - 136mm We design…
These are only the bobbin ends. You need to print 1x eew_mini2_bobbin_tube from https://www.thingiverse.com/thing:3262290 and either 2x of the "gf" (requires glue) or "pf" press fit disks per bobbin. NOTE: The "flat" end is an…
